// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include "mt7621.dtsi" #include #include #include / { compatible = "mercusys,mr70x-v1", "mediatek,mt7621-soc"; model = "MERCUSYS MR70X v1"; aliases { led-boot = &led_power_green; led-failsafe = &led_power_orange; led-running = &led_power_green; led-upgrade = &led_power_orange; label-mac-device = &gmac0; }; chosen { bootargs = "console=ttyS0,115200"; }; keys { compatible = "gpio-keys"; reset { label = "reset"; gpios = <&gpio 8 GPIO_ACTIVE_LOW>; linux,code = ; }; }; leds { compatible = "gpio-leds"; led_power_green: power-green { function = LED_FUNCTION_POWER; color = ; gpios = <&gpio 4 GPIO_ACTIVE_LOW>; }; led_power_orange: power-orange { function = LED_FUNCTION_POWER; color = ; gpios = <&gpio 3 GPIO_ACTIVE_LOW>; }; }; }; &spi0 { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <25000000>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x000000 0x040000>; read-only; }; partition@40000 { compatible = "denx,uimage"; label = "firmware"; reg = <0x040000 0xf60000>; }; config: partition@fa0000 { label = "config"; reg = <0xfa0000 0x010000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; macaddr_config_8: macaddr@8 { compatible = "mac-base"; reg = <0x8 0x6>; #nvmem-cell-cells = <1>; }; }; }; partition@fb0000 { label = "tplink"; reg = <0xfb0000 0x040000>; read-only; }; radio: partition@ff0000 { label = "radio"; reg = <0xff0000 0x010000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; eeprom_radio_0: eeprom@0 { reg = <0x0 0xe00>; }; }; }; }; }; }; &pcie { status = "okay"; }; &pcie1 { wifi@0,0 { compatible = "mediatek,mt76"; reg = <0x0000 0 0 0 0>; nvmem-cells = <&eeprom_radio_0>, <&macaddr_config_8 0>; nvmem-cell-names = "eeprom", "mac-address"; mediatek,disable-radar-background; }; }; &gmac0 { nvmem-cells = <&macaddr_config_8 0>; nvmem-cell-names = "mac-address"; }; &gmac1 { status = "okay"; label = "wan"; phy-handle = <ðphy0>; nvmem-cells = <&macaddr_config_8 1>; nvmem-cell-names = "mac-address"; }; &mdio { ethphy0: ethernet-phy@0 { reg = <0>; }; }; &switch0 { ports { port@1 { status = "okay"; label = "lan1"; }; port@2 { status = "okay"; label = "lan2"; }; port@3 { status = "okay"; label = "lan3"; }; }; }; &state_default { gpio { groups = "i2c", "uart3"; function = "gpio"; }; };