// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include "mt7620a.dtsi" #include #include #include / { compatible = "dlink,dir-806a-b1", "ralink,mt7620a-soc"; model = "D-Link DIR-806A B1"; aliases { led-boot = &wps_led; led-failsafe = &wps_led; led-running = &wps_led; led-upgrade = &wps_led; }; keys { compatible = "gpio-keys"; reset { label = "reset"; gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; // #12 linux,code = ; }; }; leds { compatible = "gpio-leds"; wifi_led: 2.4g { color = ; function = LED_FUNCTION_WLAN; gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; // #72 }; wps_led: wps { color = ; function = LED_FUNCTION_WPS; gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; // #39 }; }; }; &gpio0 { status = "okay"; }; &gpio1 { status = "okay"; }; &gpio3 { status = "okay"; }; &spi0 { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <48000000>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "ALL"; reg = <0x0 0x800000>; read-only; }; partition@0_1 { label = "u-boot"; reg = <0x0 0x30000>; read-only; }; partition@30000 { label = "u-boot-env"; reg = <0x30000 0x10000>; }; factory: partition@40000 { label = "Factory"; reg = <0x40000 0x10000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; eeprom_factory_0: eeprom@0 { reg = <0x0 0x200>; }; eeprom_factory_8000: eeprom@8000 { reg = <0x8000 0x200>; }; macaddr_factory_4: macaddr@4 { compatible = "mac-base"; reg = <0x4 0x6>; #nvmem-cell-cells = <1>; }; macaddr_factory_8004: macaddr@8004 { compatible = "mac-base"; reg = <0x8004 0x6>; #nvmem-cell-cells = <1>; }; }; }; partition@50000 { compatible = "denx,uimage"; label = "firmware"; reg = <0x50000 0x7b0000>; }; }; }; }; &state_default { gpio { groups = "i2c", "uartf", "ephy"; function = "gpio"; }; }; ðernet { nvmem-cells = <&macaddr_factory_4 (-2)>; nvmem-cell-names = "mac-address"; }; &wmac { pinctrl-names = "default", "pa_gpio"; pinctrl-0 = <&pa_pins>; pinctrl-1 = <&pa_gpio_pins>; nvmem-cells = <&eeprom_factory_0>, <&macaddr_factory_4 (-1)>; nvmem-cell-names = "eeprom", "mac-address"; }; &pcie { status = "okay"; }; &pcie0 { wifi@0,0 { reg = <0x0000 0 0 0 0>; ieee80211-freq-limit = <5000000 6000000>; nvmem-cells = <&eeprom_factory_8000>, <&macaddr_factory_8004 (-3)>; nvmem-cell-names = "eeprom", "mac-address"; led { led-active-low; }; }; };