// SPDX-License-Identifier: GPL-2.0-or-later OR MIT

#include "mt7620a.dtsi"

#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/mtd/partitions/uimage.h>

/ {
	compatible = "dlink,dir-510l", "ralink,mt7620a-soc";
	model = "D-Link DIR-510L";

	aliases {
		led-boot = &led_status;
		led-failsafe = &led_status;
		led-running = &led_status;
		led-upgrade = &led_status;
	};

	chosen {
		bootargs = "console=ttyS1,57600";
	};

	keys {
		compatible = "gpio-keys";

		reset {
			label = "reset";
			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RESTART>;
		};

		wps {
			label = "wps";
			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_WPS_BUTTON>;
		};
	};

	leds {
		compatible = "gpio-leds";

		led_status: status {
			function = LED_FUNCTION_STATUS;
			color = <LED_COLOR_ID_GREEN>;
			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
		};

		status-red {
			function = LED_FUNCTION_STATUS;
			color = <LED_COLOR_ID_RED>;
			gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
		};
	};
};

&ethernet {
	mediatek,portmap = "llllw";
};

&uart {
	status = "okay";
};

&spi0 {
	status = "okay";

	flash@0 {
		compatible = "jedec,spi-nor";
		reg = <0>;
		spi-max-frequency = <50000000>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "jboot";
				reg = <0x0 0x10000>;
				read-only;
			};

			partition@10000 {
				label = "recovery";
				reg = <0x10000 0x200000>;
				read-only;
			};

			partition@210000 {
				compatible = "openwrt,uimage", "denx,uimage";
				openwrt,ih-magic = <IH_MAGIC_OKLI>;
				openwrt,offset = <0x10000>;
				label = "firmware";
				reg = <0x210000 0xde0000>;
			};

			config: partition@ff0000 {
				label = "config";
				reg = <0xff0000 0x10000>;
				read-only;

				nvmem-layout {
					compatible = "fixed-layout";
					#address-cells = <1>;
					#size-cells = <1>;

					eeprom_config_e05d: eeprom@e05d {
						reg = <0xe05d 0x200>;
					};

					macaddr_config_e490: macaddr@e490 {
						compatible = "mac-base";
						reg = <0xe490 0x6>;
						#nvmem-cell-cells = <1>;
					};
				};
			};
		};
	};
};

&ehci {
	status = "okay";
};

&ohci {
	status = "okay";
};

&pcie {
	status = "okay";
};

&pcie0 {
	mt76x0e@0,0 {
		reg = <0x0000 0 0 0 0>;
		nvmem-cells = <&eeprom_config_e05d>, <&macaddr_config_e490 2>;
		nvmem-cell-names = "eeprom", "mac-address";
	};
};

&state_default {
	default {
		groups = "i2c", "uartf";
		function = "gpio";
	};
};