From 5ac078c8fe18f3e8318547b8ed0ed782730c5039 Mon Sep 17 00:00:00 2001 From: Christian Marangi Date: Sat, 10 Feb 2024 22:28:27 +0100 Subject: [PATCH] ARM: dts: qcom: ipq4019: add QCA8075 PHY Package nodes Add QCA8075 PHY Package nodes. The PHY nodes that were previously defined never worked and actually never had a driver to correctly setup these PHY. Now that we have a correct driver, correctly add the PHY Package node and set the default value of 300mw for tx driver strength following specification of ipq4019 SoC. Signed-off-by: Christian Marangi --- arch/arm/boot/dts//qcom-ipq4019.dtsi | 35 +++++++++++++++--------- 1 file changed, 22 insertions(+), 13 deletions(-) --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi @@ -725,24 +725,33 @@ reg = <0x90000 0x64>; status = "disabled"; - ethphy0: ethernet-phy@0 { + ethernet-phy-package@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "qcom,qca8075-package"; reg = <0>; - }; - - ethphy1: ethernet-phy@1 { - reg = <1>; - }; - ethphy2: ethernet-phy@2 { - reg = <2>; - }; - - ethphy3: ethernet-phy@3 { - reg = <3>; - }; + qcom,tx-drive-strength-milliwatt = <300>; - ethphy4: ethernet-phy@4 { - reg = <4>; + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + reg = <1>; + }; + + ethphy2: ethernet-phy@2 { + reg = <2>; + }; + + ethphy3: ethernet-phy@3 { + reg = <3>; + }; + + ethphy4: ethernet-phy@4 { + reg = <4>; + }; }; };