// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include "mt7620a.dtsi" #include #include #include #include / { compatible = "bolt,bl100", "ralink,mt7620a-soc"; model = "Bolt BL100"; aliases { led-boot = &led_reset; led-failsafe = &led_reset; led-running = &led_power; led-upgrade = &led_reset; label-mac-device = ðernet; }; chosen { bootargs = "console=ttyS0,57600"; }; leds { compatible = "gpio-leds"; led_reset: reset { function = LED_FUNCTION_BOOT; color = ; gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; }; led_power: power { function = LED_FUNCTION_POWER; color = ; gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; }; led_lte1 { label = "blue:lte1"; gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; }; led_lte2 { label = "blue:lte2"; gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; }; led_lte3 { label = "blue:lte3"; gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; }; led_lte4 { label = "blue:lte4"; gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; }; led_lte5 { label = "red:lte5"; gpios = <&gpio2 24 GPIO_ACTIVE_LOW>; }; led_lte6 { label = "red:lte6"; gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; }; led_wps { function = LED_FUNCTION_WPS; color = ; gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; }; led_voip { label = "blue:voip"; gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; }; led_wlan2 { function = LED_FUNCTION_WLAN_2GHZ; color = ; gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy1tpt"; }; led_wlan5 { function = LED_FUNCTION_WLAN_5GHZ; color = ; gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy0tpt"; }; led_lan { function = LED_FUNCTION_LAN; color = ; gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; }; led_wan { function = LED_FUNCTION_WAN; color = ; gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; }; }; keys { compatible = "gpio-keys"; wps { label = "WPS"; linux,code = ; gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; }; reset { label = "RST"; linux,code = ; gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; }; }; }; &gpio0 { status = "okay"; }; &gpio1 { status = "okay"; }; &gpio2 { status = "okay"; }; &gpio3 { status = "okay"; }; &spi0 { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <50000000>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x0 0x30000>; read-only; }; partition@30000 { label = "u-boot-env"; reg = <0x30000 0x10000>; }; partition@40000 { compatible = "nvmem-cells"; label = "factory"; reg = <0x40000 0x10000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; eeprom_factory_0: eeprom@0 { reg = <0x0 0x200>; }; eeprom_factory_8000: eeprom@8000 { reg = <0x8000 0x200>; }; macaddr_factory_28: macaddr@28 { reg = <0x28 0x6>; }; }; }; partition@50000 { label = "firmware"; reg = <0x50000 0xf80000>; compatible = "openwrt,uimage", "denx,uimage"; openwrt,ih-magic = <0x26112015>; }; partition@fd0000 { label = "crash"; reg = <0xfd0000 0x10000>; }; partition@fe0000 { label = "reserved"; reg = <0xfe0000 0x10000>; read-only; }; partition@ff0000 { label = "Bdata"; reg = <0xff0000 0x10000>; }; }; }; }; &ehci { status = "okay"; }; &ohci { status = "okay"; }; ðernet { nvmem-cells = <&macaddr_factory_28>; nvmem-cell-names = "mac-address"; mediatek,portmap = "llllw"; }; &wmac { nvmem-cells = <&eeprom_factory_0>; nvmem-cell-names = "eeprom"; pinctrl-names = "default", "pa_gpio"; pinctrl-0 = <&pa_pins>; pinctrl-1 = <&pa_gpio_pins>; }; &pcie { status = "okay"; }; &pcie0 { mt76@0,0 { reg = <0x0000 0 0 0 0>; nvmem-cells = <&eeprom_factory_8000>; nvmem-cell-names = "eeprom"; ieee80211-freq-limit = <5000000 6000000>; }; }; &state_default { gpio { groups = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled", "nd_sd"; function = "gpio"; }; };