// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

#include "qca953x.dtsi"

/ {
	compatible = "glinet,gl-s200", "qca,qca9531";
	model = "GL.iNet GL-S200";

	aliases {
		label-mac-device = &eth0;
	};

	keys {
		compatible = "gpio-keys";

		pinctrl-names = "default";
		pinctrl-0 = <&jtag_disable_pins>;

		reset {
			label = "reset";
			linux,code = <KEY_RESTART>;
			linux,input-type = <EV_KEY>;
			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
		};

		switch {
			label = "switch";
			linux,code = <KEY_SETUP>;
			linux,input-type = <EV_SW>;
			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
		};
	};

	leds {
		compatible = "gpio-leds";

		blue_led {
			label = "gl-s200:blue";
			gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
			default-state = "on";
		};

		white_led {
			label = "gl-s200:white";
			gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
			default-state = "off";
		};

		orange_led {
			label = "gl-s200:orange";
			gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
			default-state = "off";
		};
	};

	gpio-export {
		compatible = "gpio-export";

		gpio_zigbee_reset {
			gpio-export,name = "gpio1";
			gpio-export,output = <1>;
			gpio-export,direction_may_change;
			gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
		};

		gpio_zwave_reset {
			gpio-export,name = "gpio2";
			gpio-export,output = <1>;
			gpio-export,direction_may_change;
			gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
		};

		gpio_zigbee_upgrade {
			gpio-export,name = "gpio11";
			gpio-export,output = <1>;
			gpio-export,direction_may_change;
			gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
		};

		gpio_zwave_upgrade {
			gpio-export,name = "gpio17";
			gpio-export,output = <1>;
			gpio-export,direction_may_change;
			gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
		};
	 };
};

&gpio {
	ngpios = <17>;
	gpio-line-names =
		"","reset-zigbee","reset-zwave","reset",
		"LED-orange","","","","","","",
		"upgrade-zigbee","LED-white","LED-blue",
		"switch","","","upgrade-zwave";
};

&pcie0 {
	status = "okay";
};

&uart {
	status = "okay";
};

&spi {
	status = "okay";

	flash@0 {
		compatible = "jedec,spi-nor";
		reg = <0>;
		spi-max-frequency = <25000000>;

		nor_partitions: partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "u-boot";
				reg = <0x000000 0x040000>;
				read-only;
			};

			partition@40000 {
				label = "u-boot-env";
				reg = <0x040000 0x010000>;
			};

			art: partition@50000 {
				label = "art";
				reg = <0x050000 0x010000>;
				read-only;

				compatible = "nvmem-cells";

				nvmem-layout {
					compatible = "fixed-layout";
					#address-cells = <1>;
					#size-cells = <1>;

					macaddr_wan_lan: macaddr@0 {
						compatible = "mac-base";
						reg = <0x0 0x6>;
						#nvmem-cell-cells = <1>;
					};

					calibration_art_1000: calibration@1000 {
						reg = <0x1000 0x440>;
					};
				};
			};
		};
	};

	flash_nand: flash@1 {
		compatible = "spi-nand";
		reg = <1>;
		spi-max-frequency = <25000000>;
		status = "disabled";
		
		nand_partitions: partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			nand_ubi: partition@0 {
				label = "ubi";
				reg = <0x000000 0x8000000>;
			};
		};
	};
};

&eth0 {
	status = "okay";

	phy-handle = <&swphy4>;

	nvmem-cells = <&macaddr_wan_lan 0>;
	nvmem-cell-names = "mac-address";
};

&eth1 {
	status = "okay";

	nvmem-cells = <&macaddr_wan_lan 1>;
	nvmem-cell-names = "mac-address";
};

&wmac {
	status = "okay";
	nvmem-cells = <&calibration_art_1000>;
	nvmem-cell-names = "calibration";
};