// SPDX-License-Identifier: GPL-2.0-or-later #include "mt7621.dtsi" #include #include #include / { compatible = "tplink,eap613-v1", "mediatek,mt7621-soc"; model = "TP-Link EAP613 v1"; aliases { label-mac-device = &gmac0; led-boot = &led_status; led-failsafe = &led_status; led-running = &led_status; led-upgrade = &led_status; }; chosen { bootargs = "console=ttyS0,115200"; }; leds { compatible = "gpio-leds"; led_status: status { color = ; function = LED_FUNCTION_STATUS; gpios = <&gpio 7 GPIO_ACTIVE_HIGH>; }; }; keys { compatible = "gpio-keys"; reset { label = "reset"; gpios = <&gpio 8 GPIO_ACTIVE_LOW>; linux,code = ; }; }; }; &spi0 { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <20000000>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x0 0x80000>; read-only; }; partition@80000 { label = "partition-table"; reg = <0x80000 0x10000>; read-only; }; partition@90000 { label = "product-info"; reg = <0x90000 0x10000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; macaddr: macaddr@8 { reg = <0x8 0x6>; }; }; }; partition@a0000 { compatible = "denx,fit"; label = "firmware"; reg = <0xa0000 0xcf0000>; }; partition@d90000 { label = "user-config"; reg = <0xd90000 0x60000>; read-only; }; partition@f30000 { label = "mutil-log"; reg = <0xf30000 0x80000>; read-only; }; partition@fb0000 { label = "oops"; reg = <0xfb0000 0x40000>; read-only; }; radio: partition@ff0000 { label = "radio"; reg = <0xff0000 0x10000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; eeprom_radio_0: eeprom@0 { reg = <0x0 0xe00>; }; }; }; }; }; }; &state_default { gpio { groups = "uart3"; function = "gpio"; }; }; &pcie { status = "okay"; }; &pcie1 { wifi@0,0 { compatible = "mediatek,mt76"; reg = <0x0000 0 0 0 0>; nvmem-cells = <&eeprom_radio_0>; nvmem-cell-names = "eeprom"; mediatek,disable-radar-background; }; }; &gmac0 { nvmem-cells = <&macaddr>; nvmem-cell-names = "mac-address"; }; &switch0 { ports { port@0 { status = "okay"; label = "lan"; }; }; };