// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include "mt7621.dtsi" #include #include #include / { compatible = "iptime,ax2004m", "mediatek,mt7621-soc"; model = "ipTIME AX2004M"; aliases { led-boot = &led_cpu; led-failsafe = &led_cpu; led-running = &led_cpu; led-upgrade = &led_cpu; }; chosen { bootargs = "console=ttyS0,115200"; }; leds { compatible = "gpio-leds"; led_cpu: cpu { function = LED_FUNCTION_CPU; color = ; gpios = <&gpio 18 GPIO_ACTIVE_LOW>; }; wlan2g { label = "amber:wlan2g"; gpios = <&gpio 17 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy0radio"; }; wlan5g { label = "amber:wlan5g"; gpios = <&gpio 14 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy1radio"; }; }; keys { compatible = "gpio-keys"; reset { label = "reset"; gpios = <&gpio 4 GPIO_ACTIVE_LOW>; linux,code = ; }; }; }; &nand { status = "okay"; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x0 0x80000>; read-only; }; partition@80000 { label = "config"; reg = <0x80000 0x80000>; read-only; }; factory: partition@100000 { label = "factory"; reg = <0x100000 0x80000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; eeprom_factory_0: eeprom@0 { reg = <0x0 0xe00>; }; macaddr_factory_4: macaddr@4 { compatible = "mac-base"; reg = <0x4 0x6>; #nvmem-cell-cells = <1>; }; precal_factory_e10: precal@e10 { reg = <0xe10 0x19c10>; }; }; }; partition@180000 { label = "firmware"; reg = <0x180000 0x7680000>; compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "kernel"; reg = <0x0 0x400000>; }; partition@400000 { label = "ubi"; reg = <0x400000 0x7280000>; }; }; }; }; &state_default { gpio { groups = "i2c", "jtag", "wdt"; function = "gpio"; }; }; &gmac0 { nvmem-cells = <&macaddr_factory_4 3>; nvmem-cell-names = "mac-address"; }; &gmac1 { status = "okay"; label = "wan"; phy-handle = <ðphy0>; nvmem-cells = <&macaddr_factory_4 1>; nvmem-cell-names = "mac-address"; }; &mdio { ethphy0: ethernet-phy@0 { reg = <0>; }; }; &switch0 { ports { port@1 { status = "okay"; label = "lan4"; }; port@2 { status = "okay"; label = "lan3"; }; port@3 { status = "okay"; label = "lan2"; }; port@4 { status = "okay"; label = "lan1"; }; }; }; &pcie { status = "okay"; }; &pcie1 { wifi@0,0 { compatible = "mediatek,mt76"; reg = <0x0000 0 0 0 0>; nvmem-cells = <&eeprom_factory_0>, <&precal_factory_e10>; nvmem-cell-names = "eeprom", "precal"; }; };