From ad842bfb2eb10a75050dd69145ca59de982eb0e9 Mon Sep 17 00:00:00 2001 From: Samuel Holland Date: Sun, 17 Jul 2022 11:46:52 -0500 Subject: [PATCH 021/117] regulator: sun20i: Add support for Allwinner D1 LDOs D1 contains two pairs of LDOs. Since they have similar bindings, and they always exist together, put them in a single driver. The analog LDOs are relatively boring, with a single linear range. Their one quirk is that a bandgap reference must be calibrated for them to produce the correct voltage. The system LDOs have the complication that their voltage step is not an integer, so a custom .list_voltage is needed to get the rounding right. Series-changes: 2 - Use decimal numbers for .n_voltages instead of field widths - Get the regmap from the parent device instead of a property/phandle Series-changes: 3 - Adjust control flow in sun20i_regulator_get_regmap() for clarity Reviewed-by: Heiko Stuebner Tested-by: Heiko Stuebner Signed-off-by: Samuel Holland --- drivers/regulator/Kconfig | 8 + drivers/regulator/Makefile | 1 + drivers/regulator/sun20i-regulator.c | 232 +++++++++++++++++++++++++++ 3 files changed, 241 insertions(+) create mode 100644 drivers/regulator/sun20i-regulator.c --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -1280,6 +1280,14 @@ config REGULATOR_STW481X_VMMC This driver supports the internal VMMC regulator in the STw481x PMIC chips. +config REGULATOR_SUN20I + tristate "Allwinner D1 internal LDOs" + depends on ARCH_SUNXI || COMPILE_TEST + depends on MFD_SYSCON && NVMEM + default ARCH_SUNXI + help + This driver supports the internal LDOs in the Allwinner D1 SoC. + config REGULATOR_SY7636A tristate "Silergy SY7636A voltage regulator" depends on MFD_SY7636A --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -150,6 +150,7 @@ obj-$(CONFIG_REGULATOR_STM32_VREFBUF) += obj-$(CONFIG_REGULATOR_STM32_PWR) += stm32-pwr.o obj-$(CONFIG_REGULATOR_STPMIC1) += stpmic1_regulator.o obj-$(CONFIG_REGULATOR_STW481X_VMMC) += stw481x-vmmc.o +obj-$(CONFIG_REGULATOR_SUN20I) += sun20i-regulator.o obj-$(CONFIG_REGULATOR_SY7636A) += sy7636a-regulator.o obj-$(CONFIG_REGULATOR_SY8106A) += sy8106a-regulator.o obj-$(CONFIG_REGULATOR_SY8824X) += sy8824x.o --- /dev/null +++ b/drivers/regulator/sun20i-regulator.c @@ -0,0 +1,232 @@ +// SPDX-License-Identifier: GPL-2.0-only +// +// Copyright (c) 2021-2022 Samuel Holland +// + +#include +#include +#include +#include +#include +#include +#include + +#define SUN20I_POWER_REG 0x348 + +#define SUN20I_SYS_LDO_CTRL_REG 0x150 + +struct sun20i_regulator_data { + int (*init)(struct device *dev, + struct regmap *regmap); + const struct regulator_desc *descs; + unsigned int ndescs; +}; + +static int sun20i_d1_analog_ldos_init(struct device *dev, struct regmap *regmap) +{ + u8 bg_trim; + int ret; + + ret = nvmem_cell_read_u8(dev, "bg_trim", &bg_trim); + if (ret) + return dev_err_probe(dev, ret, "Failed to get bg_trim value\n"); + + /* The default value corresponds to 900 mV. */ + if (!bg_trim) + bg_trim = 0x19; + + return regmap_update_bits(regmap, SUN20I_POWER_REG, + GENMASK(7, 0), bg_trim); +} + +static const struct regulator_ops sun20i_d1_analog_ldo_ops = { + .list_voltage = regulator_list_voltage_linear, + .map_voltage = regulator_map_voltage_linear, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, +}; + +static const struct regulator_desc sun20i_d1_analog_ldo_descs[] = { + { + .name = "aldo", + .supply_name = "vdd33", + .of_match = "aldo", + .ops = &sun20i_d1_analog_ldo_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + .n_voltages = 8, + .min_uV = 1650000, + .uV_step = 50000, + .vsel_reg = SUN20I_POWER_REG, + .vsel_mask = GENMASK(14, 12), + .enable_reg = SUN20I_POWER_REG, + .enable_mask = BIT(31), + }, + { + .name = "hpldo", + .supply_name = "hpldoin", + .of_match = "hpldo", + .ops = &sun20i_d1_analog_ldo_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + .n_voltages = 8, + .min_uV = 1650000, + .uV_step = 50000, + .vsel_reg = SUN20I_POWER_REG, + .vsel_mask = GENMASK(10, 8), + .enable_reg = SUN20I_POWER_REG, + .enable_mask = BIT(30), + }, +}; + +static const struct sun20i_regulator_data sun20i_d1_analog_ldos = { + .init = sun20i_d1_analog_ldos_init, + .descs = sun20i_d1_analog_ldo_descs, + .ndescs = ARRAY_SIZE(sun20i_d1_analog_ldo_descs), +}; + +/* regulator_list_voltage_linear() modified for the non-integral uV_step. */ +static int sun20i_d1_system_ldo_list_voltage(struct regulator_dev *rdev, + unsigned int selector) +{ + const struct regulator_desc *desc = rdev->desc; + unsigned int uV; + + if (selector >= desc->n_voltages) + return -EINVAL; + + uV = desc->min_uV + (desc->uV_step * selector); + + /* Produce correctly-rounded absolute voltages. */ + return uV + ((selector + 1 + (desc->min_uV % 4)) / 3); +} + +static const struct regulator_ops sun20i_d1_system_ldo_ops = { + .list_voltage = sun20i_d1_system_ldo_list_voltage, + .map_voltage = regulator_map_voltage_ascend, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, +}; + +static const struct regulator_desc sun20i_d1_system_ldo_descs[] = { + { + .name = "ldoa", + .supply_name = "ldo-in", + .of_match = "ldoa", + .ops = &sun20i_d1_system_ldo_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + .n_voltages = 32, + .min_uV = 1600000, + .uV_step = 13333, /* repeating */ + .vsel_reg = SUN20I_SYS_LDO_CTRL_REG, + .vsel_mask = GENMASK(7, 0), + }, + { + .name = "ldob", + .supply_name = "ldo-in", + .of_match = "ldob", + .ops = &sun20i_d1_system_ldo_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + .n_voltages = 64, + .min_uV = 1166666, + .uV_step = 13333, /* repeating */ + .vsel_reg = SUN20I_SYS_LDO_CTRL_REG, + .vsel_mask = GENMASK(15, 8), + }, +}; + +static const struct sun20i_regulator_data sun20i_d1_system_ldos = { + .descs = sun20i_d1_system_ldo_descs, + .ndescs = ARRAY_SIZE(sun20i_d1_system_ldo_descs), +}; + +static const struct of_device_id sun20i_regulator_of_match[] = { + { + .compatible = "allwinner,sun20i-d1-analog-ldos", + .data = &sun20i_d1_analog_ldos, + }, + { + .compatible = "allwinner,sun20i-d1-system-ldos", + .data = &sun20i_d1_system_ldos, + }, + { }, +}; +MODULE_DEVICE_TABLE(of, sun20i_regulator_of_match); + +static struct regmap *sun20i_regulator_get_regmap(struct device *dev) +{ + struct regmap *regmap; + + /* + * First try the syscon interface. The system control device is not + * compatible with "syscon", so fall back to getting the regmap from + * its platform device. This is ugly, but required for devicetree + * backward compatibility. + */ + regmap = syscon_node_to_regmap(dev->parent->of_node); + if (!IS_ERR(regmap)) + return regmap; + + regmap = dev_get_regmap(dev->parent, NULL); + if (regmap) + return regmap; + + return ERR_PTR(-EPROBE_DEFER); +} + +static int sun20i_regulator_probe(struct platform_device *pdev) +{ + const struct sun20i_regulator_data *data; + struct device *dev = &pdev->dev; + struct regulator_config config; + struct regmap *regmap; + int ret; + + data = of_device_get_match_data(dev); + if (!data) + return -EINVAL; + + regmap = sun20i_regulator_get_regmap(dev); + if (IS_ERR(regmap)) + return dev_err_probe(dev, PTR_ERR(regmap), "Failed to get regmap\n"); + + if (data->init) { + ret = data->init(dev, regmap); + if (ret) + return ret; + } + + config = (struct regulator_config) { + .dev = dev, + .regmap = regmap, + }; + + for (unsigned int i = 0; i < data->ndescs; ++i) { + const struct regulator_desc *desc = &data->descs[i]; + struct regulator_dev *rdev; + + rdev = devm_regulator_register(dev, desc, &config); + if (IS_ERR(rdev)) + return PTR_ERR(rdev); + } + + return 0; +} + +static struct platform_driver sun20i_regulator_driver = { + .probe = sun20i_regulator_probe, + .driver = { + .name = "sun20i-regulator", + .of_match_table = sun20i_regulator_of_match, + }, +}; +module_platform_driver(sun20i_regulator_driver); + +MODULE_AUTHOR("Samuel Holland "); +MODULE_DESCRIPTION("Allwinner D1 internal LDO driver"); +MODULE_LICENSE("GPL");