#include "bcm6362.dtsi" #include #include / { model = "Sagem F@st 2504N"; compatible = "sagem,fast-2504n", "brcm,bcm6362"; aliases { led-boot = &led_ok_green; led-failsafe = &led_ok_green; led-running = &led_ok_green; led-upgrade = &led_ok_green; }; chosen { bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"; stdout-path = "serial0:115200n8"; }; keys { compatible = "gpio-keys-polled"; #address-cells = <1>; #size-cells = <0>; poll-interval = <20>; reset { label = "reset"; gpios = <&pinctrl 24 1>; linux,code = ; debounce-interval = <60>; }; wps { label = "wps"; gpios = <&pinctrl 25 1>; linux,code = ; debounce-interval = <60>; }; }; leds { compatible = "gpio-leds"; power_orange { function = LED_FUNCTION_POWER; color = ; gpios = <&pinctrl 2 1>; }; power_green { function = LED_FUNCTION_POWER; color = ; gpios = <&pinctrl 10 1>; default-state = "on"; }; inet_red { label = "red:internet"; gpios = <&pinctrl 26 1>; }; led_ok_green: ok_green { label = "green:ok"; gpios = <&pinctrl 28 1>; }; ok_orange { label = "orange:ok"; gpios = <&pinctrl 29 1>; }; wlan_orangee { function = LED_FUNCTION_WLAN; color = ; gpios = <&pinctrl 30 1>; }; }; }; &hsspi { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; spi-max-frequency = <20000000>; spi-tx-bus-width = <2>; spi-rx-bus-width = <2>; reg = <0>; #address-cells = <1>; #size-cells = <1>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; cfe@0 { reg = <0x000000 0x010000>; label = "cfe"; read-only; }; linux@10000 { reg = <0x010000 0x7e0000>; label = "linux"; compatible = "brcm,bcm963xx-imagetag"; }; nvram@7f0000 { reg = <0x7f0000 0x010000>; label = "nvram"; }; }; }; }; &uart0 { status = "okay"; };