From ab3f81920b4e47bd2894388540363700d5b1e59c Mon Sep 17 00:00:00 2001 From: Weijie Gao Date: Fri, 29 Jul 2022 15:26:31 +0800 Subject: [PATCH 03/31] board: mediatek: add MT7986 reference boards Add general board files based on MT7986 SoCs. MT7986 uses one mmc controller for booting from both SD and eMMC. Both MT7986A and MT7986B use the same pins for spi controller. Configs for various boot types: 1. mt7986_rfb_defconfig - SPI-NOR and SPI-NAND for MT7986A/B 2. mt7986a_bpir3_emmc_defconfig - eMMC for MT7986A only 3. mt7986a_bpir3_sd_defconfig - SD for MT7986A only Reviewed-by: Simon Glass Signed-off-by: Weijie Gao --- arch/arm/dts/Makefile | 6 + arch/arm/dts/mt7986a-emmc-rfb.dts | 16 ++ arch/arm/dts/mt7986a-rfb.dts | 218 +++++++++++++++++++++++++++ arch/arm/dts/mt7986a-sd-rfb.dts | 177 ++++++++++++++++++++++ arch/arm/dts/mt7986b-emmc-rfb.dts | 16 ++ arch/arm/dts/mt7986b-rfb.dts | 204 +++++++++++++++++++++++++ arch/arm/dts/mt7986b-sd-rfb.dts | 173 +++++++++++++++++++++ board/mediatek/mt7986/MAINTAINERS | 10 ++ board/mediatek/mt7986/Makefile | 3 + board/mediatek/mt7986/mt7986_rfb.c | 10 ++ configs/mt7986_rfb_defconfig | 66 ++++++++ configs/mt7986a_bpir3_emmc_defconfig | 64 ++++++++ configs/mt7986a_bpir3_sd_defconfig | 64 ++++++++ include/configs/mt7986.h | 26 ++++ 14 files changed, 1053 insertions(+) create mode 100644 arch/arm/dts/mt7986a-emmc-rfb.dts create mode 100644 arch/arm/dts/mt7986a-rfb.dts create mode 100644 arch/arm/dts/mt7986a-sd-rfb.dts create mode 100644 arch/arm/dts/mt7986b-emmc-rfb.dts create mode 100644 arch/arm/dts/mt7986b-rfb.dts create mode 100644 arch/arm/dts/mt7986b-sd-rfb.dts create mode 100644 board/mediatek/mt7986/MAINTAINERS create mode 100644 board/mediatek/mt7986/Makefile create mode 100644 board/mediatek/mt7986/mt7986_rfb.c create mode 100644 configs/mt7986_rfb_defconfig create mode 100644 configs/mt7986a_bpir3_emmc_defconfig create mode 100644 configs/mt7986a_bpir3_sd_defconfig create mode 100644 include/configs/mt7986.h --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -1205,6 +1205,12 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \ mt7622-bananapi-bpi-r64.dtb \ mt7623n-bananapi-bpi-r2.dtb \ mt7629-rfb.dtb \ + mt7986a-rfb.dtb \ + mt7986b-rfb.dtb \ + mt7986a-sd-rfb.dtb \ + mt7986b-sd-rfb.dtb \ + mt7986a-emmc-rfb.dtb \ + mt7986b-emmc-rfb.dtb \ mt8183-pumpkin.dtb \ mt8512-bm1-emmc.dtb \ mt8516-pumpkin.dtb \ --- /dev/null +++ b/arch/arm/dts/mt7986a-emmc-rfb.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2022 MediaTek Inc. + * Author: Sam Shih + */ + +/dts-v1/; +#include "mt7986a-rfb.dts" + +/ { + compatible = "mediatek,mt7986", "mediatek,mt7986-rfb", + "mediatek,mt7986-emmc-rfb"; + bl2_verify { + bl2_compatible = "emmc"; + }; +}; --- /dev/null +++ b/arch/arm/dts/mt7986a-rfb.dts @@ -0,0 +1,218 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2022 MediaTek Inc. + * Author: Sam Shih + */ + +/dts-v1/; +#include "mt7986.dtsi" +#include + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "mt7986-rfb"; + compatible = "mediatek,mt7986", "mediatek,mt7986-rfb"; + chosen { + stdout-path = &uart0; + tick-timer = &timer0; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "disabled"; +}; + +ð { + status = "okay"; + mediatek,gmac-id = <0>; + phy-mode = "sgmii"; + mediatek,switch = "mt7531"; + reset-gpios = <&gpio 5 GPIO_ACTIVE_HIGH>; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&pinctrl { + spi_flash_pins: spi0-pins-func-1 { + mux { + function = "flash"; + groups = "spi0", "spi0_wp_hold"; + }; + + conf-pu { + pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP"; + drive-strength = ; + bias-pull-up = ; + }; + + conf-pd { + pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO"; + drive-strength = ; + bias-pull-down = ; + }; + }; + + snfi_pins: snfi-pins-func-1 { + mux { + function = "flash"; + groups = "snfi"; + }; + + clk { + pins = "SPI0_CLK"; + drive-strength = ; + bias-pull-down = ; + }; + + conf-pu { + pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP"; + drive-strength = ; + bias-pull-up = ; + }; + + conf-pd { + pins = "SPI0_MOSI", "SPI0_MISO"; + drive-strength = ; + bias-pull-down = ; + }; + }; + + spic_pins: spi1-pins-func-1 { + mux { + function = "spi"; + groups = "spi1_2"; + }; + }; + + uart1_pins: spi1-pins-func-3 { + mux { + function = "uart"; + groups = "uart1_2"; + }; + }; + + pwm_pins: pwm0-pins-func-1 { + mux { + function = "pwm"; + groups = "pwm0"; + }; + }; + + mmc0_pins_default: mmc0default { + mux { + function = "flash"; + groups = "emmc_51"; + }; + + conf-cmd-dat { + pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2", + "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5", + "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD"; + input-enable; + drive-strength = ; + bias-pull-up = ; + }; + + conf-clk { + pins = "EMMC_CK"; + drive-strength = ; + bias-pull-down = ; + }; + + conf-dsl { + pins = "EMMC_DSL"; + bias-pull-down = ; + }; + + conf-rst { + pins = "EMMC_RSTB"; + drive-strength = ; + bias-pull-up = ; + }; + }; +}; + +&snand { + pinctrl-names = "default"; + pinctrl-0 = <&snfi_pins>; + status = "okay"; + quad-spi; +}; + +&spi0 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi_flash_pins>; + status = "okay"; + must_tx; + enhance_timing; + dma_ext; + ipm_design; + support_quad; + tick_dly = <2>; + sample_sel = <0>; + + spi_nor@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <52000000>; + }; + + spi_nand@1 { + compatible = "spi-nand"; + reg = <1>; + spi-max-frequency = <52000000>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm_pins>; + status = "okay"; +}; + +&watchdog { + status = "disabled"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_default>; + bus-width = <8>; + max-frequency = <52000000>; + cap-mmc-highspeed; + cap-mmc-hw-reset; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + non-removable; + status = "okay"; +}; --- /dev/null +++ b/arch/arm/dts/mt7986a-sd-rfb.dts @@ -0,0 +1,177 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2022 MediaTek Inc. + * Author: Sam Shih + */ + +/dts-v1/; +#include "mt7986.dtsi" +#include + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "mt7986-rfb"; + compatible = "mediatek,mt7986", "mediatek,mt7986-rfb", + "mediatek,mt7986-sd-rfb"; + chosen { + stdout-path = &uart0; + tick-timer = &timer0; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "disabled"; +}; + +ð { + status = "okay"; + mediatek,gmac-id = <0>; + phy-mode = "sgmii"; + mediatek,switch = "mt7531"; + reset-gpios = <&gpio 5 GPIO_ACTIVE_HIGH>; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&pinctrl { + spi_flash_pins: spi0-pins-func-1 { + mux { + function = "flash"; + groups = "spi0", "spi0_wp_hold"; + }; + + conf-pu { + pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP"; + drive-strength = ; + bias-pull-up = ; + }; + + conf-pd { + pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO"; + drive-strength = ; + bias-pull-down = ; + }; + }; + + spic_pins: spi1-pins-func-1 { + mux { + function = "spi"; + groups = "spi1_2"; + }; + }; + + uart1_pins: spi1-pins-func-3 { + mux { + function = "uart"; + groups = "uart1_2"; + }; + }; + + pwm_pins: pwm0-pins-func-1 { + mux { + function = "pwm"; + groups = "pwm0"; + }; + }; + + mmc0_pins_default: mmc0default { + mux { + function = "flash"; + groups = "emmc_51"; + }; + + conf-cmd-dat { + pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2", + "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5", + "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD"; + input-enable; + drive-strength = ; + bias-pull-up = ; + }; + + conf-clk { + pins = "EMMC_CK"; + drive-strength = ; + bias-pull-down = ; + }; + + conf-dsl { + pins = "EMMC_DSL"; + bias-pull-down = ; + }; + + conf-rst { + pins = "EMMC_RSTB"; + drive-strength = ; + bias-pull-up = ; + }; + }; +}; + +&spi0 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi_flash_pins>; + status = "okay"; + must_tx; + enhance_timing; + dma_ext; + ipm_design; + support_quad; + tick_dly = <2>; + sample_sel = <0>; + + spi_nor@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <52000000>; + }; + + spi_nand@1 { + compatible = "spi-nand"; + reg = <1>; + spi-max-frequency = <52000000>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm_pins>; + status = "okay"; +}; + +&watchdog { + status = "disabled"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_default>; + bus-width = <4>; + max-frequency = <52000000>; + cap-sd-highspeed; + r_smpl = <1>; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_3p3v>; + status = "okay"; +}; --- /dev/null +++ b/arch/arm/dts/mt7986b-emmc-rfb.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2022 MediaTek Inc. + * Author: Sam Shih + */ + +/dts-v1/; +#include "mt7986a-rfb.dts" + +/ { + compatible = "mediatek,mt7986", "mediatek,mt7986-rfb", + "mediatek,mt7986-emmc-rfb"; + bl2_verify { + bl2_compatible = "emmc"; + }; +}; --- /dev/null +++ b/arch/arm/dts/mt7986b-rfb.dts @@ -0,0 +1,204 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2022 MediaTek Inc. + * Author: Sam Shih + */ + +/dts-v1/; +#include "mt7986.dtsi" +#include + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "mt7986-rfb"; + compatible = "mediatek,mt7986", "mediatek,mt7986-rfb"; + chosen { + stdout-path = &uart0; + tick-timer = &timer0; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "disabled"; +}; + +ð { + status = "okay"; + mediatek,gmac-id = <0>; + phy-mode = "sgmii"; + mediatek,switch = "mt7531"; + reset-gpios = <&gpio 5 GPIO_ACTIVE_HIGH>; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&pinctrl { + spi_flash_pins: spi0-pins-func-1 { + mux { + function = "flash"; + groups = "spi0", "spi0_wp_hold"; + }; + + conf-pu { + pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP"; + drive-strength = ; + bias-pull-up = ; + }; + + conf-pd { + pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO"; + drive-strength = ; + bias-pull-down = ; + }; + }; + + snfi_pins: snfi-pins-func-1 { + mux { + function = "flash"; + groups = "snfi"; + }; + + clk { + pins = "SPI0_CLK"; + drive-strength = ; + bias-pull-down = ; + }; + + conf-pu { + pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP"; + drive-strength = ; + bias-pull-up = ; + }; + + conf-pd { + pins = "SPI0_MOSI", "SPI0_MISO"; + drive-strength = ; + bias-pull-down = ; + }; + }; + + spic_pins: spi1-pins-func-1 { + mux { + function = "spi"; + groups = "spi1_2"; + }; + }; + + uart1_pins: spi1-pins-func-3 { + mux { + function = "uart"; + groups = "uart1_2"; + }; + }; + + pwm_pins: pwm0-pins-func-1 { + mux { + function = "pwm"; + groups = "pwm0"; + }; + }; + + mmc0_pins_default: mmc0default { + mux { + function = "flash"; + groups = "emmc_45"; + input-schmitt-enable; + }; + + conf-cmd-dat { + pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO", + "SPI0_CS", "SPI0_HOLD", "SPI0_WP", + "SPI1_CLK", "SPI1_MOSI", "SPI1_MISO"; + input-enable; + drive-strength = ; + bias-pull-up = ; + }; + + conf-clk { + pins = "SPI1_CS"; + drive-strength = ; + bias-pull-down = ; + }; + + conf-rst { + pins = "PWM1"; + drive-strength = ; + bias-pull-up = ; + }; + }; +}; + +&snand { + pinctrl-names = "default"; + pinctrl-0 = <&snfi_pins>; + status = "okay"; + quad-spi; +}; + +&spi0 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi_flash_pins>; + status = "okay"; + must_tx; + enhance_timing; + dma_ext; + ipm_design; + support_quad; + tick_dly = <2>; + sample_sel = <0>; + + spi_nor@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <52000000>; + }; + + spi_nand@1 { + compatible = "spi-nand"; + reg = <1>; + spi-max-frequency = <52000000>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm_pins>; + status = "okay"; +}; + +&watchdog { + status = "disabled"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_default>; + bus-width = <8>; + max-frequency = <52000000>; + cap-mmc-highspeed; + cap-mmc-hw-reset; + vmmc-supply = <®_3p3v>; + non-removable; + status = "okay"; +}; --- /dev/null +++ b/arch/arm/dts/mt7986b-sd-rfb.dts @@ -0,0 +1,173 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2022 MediaTek Inc. + * Author: Sam Shih + */ + +/dts-v1/; +#include "mt7986.dtsi" +#include + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "mt7986-rfb"; + compatible = "mediatek,mt7986", "mediatek,mt7986-rfb", + "mediatek,mt7986-sd-rfb"; + chosen { + stdout-path = &uart0; + tick-timer = &timer0; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "disabled"; +}; + +ð { + status = "okay"; + mediatek,gmac-id = <0>; + phy-mode = "sgmii"; + mediatek,switch = "mt7531"; + reset-gpios = <&gpio 5 GPIO_ACTIVE_HIGH>; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&pinctrl { + spi_flash_pins: spi0-pins-func-1 { + mux { + function = "flash"; + groups = "spi0", "spi0_wp_hold"; + }; + + conf-pu { + pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP"; + drive-strength = ; + bias-pull-up = ; + }; + + conf-pd { + pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO"; + drive-strength = ; + bias-pull-down = ; + }; + }; + + spic_pins: spi1-pins-func-1 { + mux { + function = "spi"; + groups = "spi1_2"; + }; + }; + + uart1_pins: spi1-pins-func-3 { + mux { + function = "uart"; + groups = "uart1_2"; + }; + }; + + pwm_pins: pwm0-pins-func-1 { + mux { + function = "pwm"; + groups = "pwm0"; + }; + }; + + mmc0_pins_default: mmc0default { + mux { + function = "flash"; + groups = "emmc_45"; + input-schmitt-enable; + }; + + conf-cmd-dat { + pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO", + "SPI0_CS", "SPI0_HOLD", "SPI0_WP", + "SPI1_CLK", "SPI1_MOSI", "SPI1_MISO"; + input-enable; + drive-strength = ; + bias-pull-up = ; + }; + + conf-clk { + pins = "SPI1_CS"; + drive-strength = ; + bias-pull-down = ; + }; + + conf-rst { + pins = "PWM1"; + drive-strength = ; + bias-pull-up = ; + }; + }; +}; + +&spi0 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi_flash_pins>; + status = "okay"; + must_tx; + enhance_timing; + dma_ext; + ipm_design; + support_quad; + tick_dly = <2>; + sample_sel = <0>; + + spi_nor@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <52000000>; + }; + + spi_nand@1 { + compatible = "spi-nand"; + reg = <1>; + spi-max-frequency = <52000000>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm_pins>; + status = "okay"; +}; + +&watchdog { + status = "disabled"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_default>; + bus-width = <4>; + max-frequency = <52000000>; + cap-sd-highspeed; + r_smpl = <1>; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_3p3v>; + status = "okay"; +}; --- /dev/null +++ b/board/mediatek/mt7986/MAINTAINERS @@ -0,0 +1,10 @@ +MT7986 +M: Sam Shih +S: Maintained +F: board/mediatek/mt7986 +F: include/configs/mt7986.h +F: configs/mt7986_rfb_defconfig +F: configs/mt7986a_emmc_rfb_defconfig +F: configs/mt7986a_sd_rfb_defconfig +F: configs/mt7986b_emmc_rfb_defconfig +F: configs/mt7986b_sd_rfb_defconfig --- /dev/null +++ b/board/mediatek/mt7986/Makefile @@ -0,0 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0 + +obj-y += mt7986_rfb.o --- /dev/null +++ b/board/mediatek/mt7986/mt7986_rfb.c @@ -0,0 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2022 MediaTek Inc. + * Author: Sam Shih + */ + +int board_init(void) +{ + return 0; +} --- /dev/null +++ b/configs/mt7986_rfb_defconfig @@ -0,0 +1,66 @@ +CONFIG_ARM=y +CONFIG_POSITION_INDEPENDENT=y +CONFIG_ARCH_MEDIATEK=y +CONFIG_SYS_TEXT_BASE=0x41e00000 +CONFIG_SYS_MALLOC_F_LEN=0x4000 +CONFIG_NR_DRAM_BANKS=1 +CONFIG_DEFAULT_DEVICE_TREE="mt7986a-rfb" +CONFIG_TARGET_MT7986=y +CONFIG_DEBUG_UART_BASE=0x11002000 +CONFIG_DEBUG_UART_CLOCK=40000000 +CONFIG_SYS_LOAD_ADDR=0x46000000 +CONFIG_DEBUG_UART=y +# CONFIG_AUTOBOOT is not set +CONFIG_DEFAULT_FDT_FILE="mt7986a-rfb" +CONFIG_LOGLEVEL=7 +CONFIG_LOG=y +CONFIG_SYS_PROMPT="MT7986> " +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=1049 +# CONFIG_BOOTM_NETBSD is not set +# CONFIG_BOOTM_PLAN9 is not set +# CONFIG_BOOTM_RTEMS is not set +# CONFIG_BOOTM_VXWORKS is not set +# CONFIG_CMD_ELF is not set +# CONFIG_CMD_UNLZ4 is not set +# CONFIG_CMD_UNZIP is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_MTD=y +CONFIG_CMD_SF_TEST=y +CONFIG_CMD_PING=y +CONFIG_CMD_SMC=y +CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_REGMAP=y +CONFIG_SYSCON=y +CONFIG_CLK=y +# CONFIG_MMC is not set +CONFIG_MTD=y +CONFIG_DM_MTD=y +CONFIG_MTD_SPI_NAND=y +CONFIG_DM_SPI_FLASH=y +CONFIG_SPI_FLASH_SFDP_SUPPORT=y +CONFIG_SPI_FLASH_EON=y +CONFIG_SPI_FLASH_GIGADEVICE=y +CONFIG_SPI_FLASH_ISSI=y +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_WINBOND=y +CONFIG_SPI_FLASH_XMC=y +CONFIG_SPI_FLASH_XTX=y +CONFIG_SPI_FLASH_MTD=y +CONFIG_PHY_FIXED=y +CONFIG_DM_ETH=y +CONFIG_MEDIATEK_ETH=y +CONFIG_PINCTRL=y +CONFIG_PINCONF=y +CONFIG_PINCTRL_MT7986=y +CONFIG_POWER_DOMAIN=y +CONFIG_MTK_POWER_DOMAIN=y +CONFIG_DM_SERIAL=y +CONFIG_MTK_SERIAL=y +CONFIG_SPI=y +CONFIG_DM_SPI=y +CONFIG_MTK_SPIM=y +CONFIG_HEXDUMP=y --- /dev/null +++ b/configs/mt7986a_bpir3_emmc_defconfig @@ -0,0 +1,64 @@ +CONFIG_ARM=y +CONFIG_POSITION_INDEPENDENT=y +CONFIG_ARCH_MEDIATEK=y +CONFIG_SYS_TEXT_BASE=0x41e00000 +CONFIG_SYS_MALLOC_F_LEN=0x4000 +CONFIG_NR_DRAM_BANKS=1 +CONFIG_ENV_SIZE=0x80000 +CONFIG_ENV_OFFSET=0x300000 +CONFIG_DEFAULT_DEVICE_TREE="mt7986a-emmc-rfb" +CONFIG_TARGET_MT7986=y +CONFIG_DEBUG_UART_BASE=0x11002000 +CONFIG_DEBUG_UART_CLOCK=40000000 +CONFIG_SYS_LOAD_ADDR=0x46000000 +CONFIG_DEBUG_UART=y +# CONFIG_AUTOBOOT is not set +CONFIG_DEFAULT_FDT_FILE="mt7986a-emmc-rfb" +CONFIG_LOGLEVEL=7 +CONFIG_LOG=y +CONFIG_SYS_PROMPT="MT7986> " +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=1049 +# CONFIG_BOOTM_NETBSD is not set +# CONFIG_BOOTM_PLAN9 is not set +# CONFIG_BOOTM_RTEMS is not set +# CONFIG_BOOTM_VXWORKS is not set +# CONFIG_CMD_ELF is not set +# CONFIG_CMD_UNLZ4 is not set +# CONFIG_CMD_UNZIP is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +CONFIG_CMD_GPT_RENAME=y +CONFIG_CMD_LSBLK=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PART=y +CONFIG_CMD_READ=y +CONFIG_CMD_PING=y +CONFIG_CMD_SMC=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_PARTITION_TYPE_GUID=y +CONFIG_ENV_OVERWRITE=y +CONFIG_ENV_IS_IN_MMC=y +CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_REGMAP=y +CONFIG_SYSCON=y +CONFIG_CLK=y +CONFIG_MMC_HS200_SUPPORT=y +CONFIG_MMC_MTK=y +CONFIG_PHY_FIXED=y +CONFIG_DM_ETH=y +CONFIG_MEDIATEK_ETH=y +CONFIG_PINCTRL=y +CONFIG_PINCONF=y +CONFIG_PINCTRL_MT7986=y +CONFIG_POWER_DOMAIN=y +CONFIG_MTK_POWER_DOMAIN=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_SERIAL=y +CONFIG_MTK_SERIAL=y +CONFIG_FAT_WRITE=y +CONFIG_HEXDUMP=y +# CONFIG_EFI_LOADER is not set --- /dev/null +++ b/configs/mt7986a_bpir3_sd_defconfig @@ -0,0 +1,64 @@ +CONFIG_ARM=y +CONFIG_POSITION_INDEPENDENT=y +CONFIG_ARCH_MEDIATEK=y +CONFIG_SYS_TEXT_BASE=0x41e00000 +CONFIG_SYS_MALLOC_F_LEN=0x4000 +CONFIG_NR_DRAM_BANKS=1 +CONFIG_ENV_SIZE=0x80000 +CONFIG_ENV_OFFSET=0x300000 +CONFIG_DEFAULT_DEVICE_TREE="mt7986a-sd-rfb" +CONFIG_TARGET_MT7986=y +CONFIG_DEBUG_UART_BASE=0x11002000 +CONFIG_DEBUG_UART_CLOCK=40000000 +CONFIG_SYS_LOAD_ADDR=0x46000000 +CONFIG_DEBUG_UART=y +# CONFIG_AUTOBOOT is not set +CONFIG_DEFAULT_FDT_FILE="mt7986a-sd-rfb" +CONFIG_LOGLEVEL=7 +CONFIG_LOG=y +CONFIG_SYS_PROMPT="MT7986> " +CONFIG_SYS_CBSIZE=512 +CONFIG_SYS_PBSIZE=1049 +# CONFIG_BOOTM_NETBSD is not set +# CONFIG_BOOTM_PLAN9 is not set +# CONFIG_BOOTM_RTEMS is not set +# CONFIG_BOOTM_VXWORKS is not set +# CONFIG_CMD_ELF is not set +# CONFIG_CMD_UNLZ4 is not set +# CONFIG_CMD_UNZIP is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +CONFIG_CMD_GPT_RENAME=y +CONFIG_CMD_LSBLK=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PART=y +CONFIG_CMD_READ=y +CONFIG_CMD_PING=y +CONFIG_CMD_SMC=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_PARTITION_TYPE_GUID=y +CONFIG_ENV_OVERWRITE=y +CONFIG_ENV_IS_IN_MMC=y +CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_REGMAP=y +CONFIG_SYSCON=y +CONFIG_CLK=y +CONFIG_MMC_HS200_SUPPORT=y +CONFIG_MMC_MTK=y +CONFIG_PHY_FIXED=y +CONFIG_DM_ETH=y +CONFIG_MEDIATEK_ETH=y +CONFIG_PINCTRL=y +CONFIG_PINCONF=y +CONFIG_PINCTRL_MT7986=y +CONFIG_POWER_DOMAIN=y +CONFIG_MTK_POWER_DOMAIN=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_SERIAL=y +CONFIG_MTK_SERIAL=y +CONFIG_FAT_WRITE=y +CONFIG_HEXDUMP=y +# CONFIG_EFI_LOADER is not set --- /dev/null +++ b/include/configs/mt7986.h @@ -0,0 +1,26 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Configuration for MediaTek MT7986 SoC + * + * Copyright (C) 2022 MediaTek Inc. + * Author: Sam Shih + */ + +#ifndef __MT7986_H +#define __MT7986_H + +#include + +#define CONFIG_SYS_NONCACHED_MEMORY SZ_1M +#define CONFIG_SYS_MMC_ENV_DEV 0 + +/* Uboot definition */ +#define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_TEXT_BASE + +/* SPL -> Uboot */ +#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE + +/* DRAM */ +#define CONFIG_SYS_SDRAM_BASE 0x40000000 + +#endif