From 12054d38fc55adbfa2b40299ad8af3449d882ee2 Mon Sep 17 00:00:00 2001 From: "SkyLake.Huang" Date: Mon, 1 Jul 2024 18:54:06 +0800 Subject: [PATCH 02/13] net: phy: mediatek: Fix spelling errors and rearrange variables This patch fixes spelling errors which comes from mediatek-ge-soc.c and rearrange variables with reverse Xmas tree order. Signed-off-by: SkyLake.Huang --- drivers/net/phy/mediatek/mtk-ge-soc.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) --- a/drivers/net/phy/mediatek/mtk-ge-soc.c +++ b/drivers/net/phy/mediatek/mtk-ge-soc.c @@ -408,16 +408,17 @@ static int tx_offset_cal_efuse(struct ph static int tx_amp_fill_result(struct phy_device *phydev, u16 *buf) { - int i; - int bias[16] = {}; - const int vals_9461[16] = { 7, 1, 4, 7, - 7, 1, 4, 7, - 7, 1, 4, 7, - 7, 1, 4, 7 }; const int vals_9481[16] = { 10, 6, 6, 10, 10, 6, 6, 10, 10, 6, 6, 10, 10, 6, 6, 10 }; + const int vals_9461[16] = { 7, 1, 4, 7, + 7, 1, 4, 7, + 7, 1, 4, 7, + 7, 1, 4, 7 }; + int bias[16] = {}; + int i; + switch (phydev->drv->phy_id) { case MTK_GPHY_ID_MT7981: /* We add some calibration to efuse values @@ -1069,10 +1070,10 @@ static int start_cal(struct phy_device * static int mt798x_phy_calibration(struct phy_device *phydev) { + struct nvmem_cell *cell; int ret = 0; - u32 *buf; size_t len; - struct nvmem_cell *cell; + u32 *buf; cell = nvmem_cell_get(&phydev->mdio.dev, "phy-cal-data"); if (IS_ERR(cell)) { @@ -1415,7 +1416,7 @@ static int mt7988_phy_probe_shared(struc * LED_C and LED_D respectively. At the same time those pins are used to * bootstrap configuration of the reference clock source (LED_A), * DRAM DDRx16b x2/x1 (LED_B) and boot device (LED_C, LED_D). - * In practise this is done using a LED and a resistor pulling the pin + * In practice this is done using a LED and a resistor pulling the pin * either to GND or to VIO. * The detected value at boot time is accessible at run-time using the * TPBANK0 register located in the gpio base of the pinctrl, in order