// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include "mt7621.dtsi" #include #include #include / { compatible = "iptime,a3002mesh", "mediatek,mt7621-soc"; model = "ipTIME A3002MESH"; aliases { led-boot = &led_cpu; led-failsafe = &led_cpu; led-running = &led_cpu; led-upgrade = &led_cpu; }; leds { compatible = "gpio-leds"; led_cpu: led-0 { label = "amber:cpu"; color = ; function = LED_FUNCTION_CPU; gpios = <&gpio 18 GPIO_ACTIVE_LOW>; }; led-1 { color = ; function = LED_FUNCTION_WLAN; function-enumerator = <0>; gpios = <&gpio 17 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy0radio"; }; led-2 { color = ; function = LED_FUNCTION_WLAN; function-enumerator = <1>; gpios = <&gpio 14 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy1radio"; }; }; keys { compatible = "gpio-keys"; reset { label = "reset"; gpios = <&gpio 4 GPIO_ACTIVE_LOW>; linux,code = ; }; }; }; &spi0 { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <50000000>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x0 0x20000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; macaddr_uboot_1fc40: macaddr@1fc40 { compatible = "mac-base"; reg = <0x1fc40 0x6>; #nvmem-cell-cells = <1>; }; }; }; partition@20000 { label = "config"; reg = <0x20000 0x10000>; read-only; }; factory: partition@30000 { label = "factory"; reg = <0x30000 0x10000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; eeprom_factory_0: eeprom@0 { reg = <0x0 0x4da8>; }; }; }; partition@40000 { compatible = "denx,uimage"; label = "firmware"; reg = <0x40000 0xfc0000>; }; }; }; }; &gmac0 { nvmem-cells = <&macaddr_uboot_1fc40 2>; nvmem-cell-names = "mac-address"; }; &gmac1 { status = "okay"; label = "wan"; phy-handle = <ðphy0>; nvmem-cells = <&macaddr_uboot_1fc40 0>; nvmem-cell-names = "mac-address"; }; &mdio { ethphy0: ethernet-phy@0 { reg = <0>; }; }; &switch0 { ports { port@3 { status = "okay"; label = "lan1"; }; port@4 { status = "okay"; label = "lan2"; }; }; }; &pcie { status = "okay"; }; &pcie0 { wifi@0,0 { compatible = "mediatek,mt76"; reg = <0x0000 0 0 0 0>; nvmem-cells = <&eeprom_factory_0>; nvmem-cell-names = "eeprom"; }; }; &state_default { gpio { groups = "i2c", "jtag", "wdt"; function = "gpio"; }; };