// SPDX-License-Identifier: GPL-2.0-or-later #include "qca955x.dtsi" #include #include / { compatible = "compex,wpj558-16m", "qca,qca9558"; model = "Compex WPJ558 (16MB flash)"; aliases { label-mac-device = ð0; led-boot = &led_sig4; led-failsafe = &led_sig4; led-running = &led_sig4; led-upgrade = &led_sig4; }; leds { compatible = "gpio-leds"; sig1 { label = "red:sig1"; gpios = <&gpio 14 GPIO_ACTIVE_LOW>; }; sig2 { label = "yellow:sig2"; gpios = <&gpio 15 GPIO_ACTIVE_LOW>; }; sig3 { label = "green:sig3"; gpios = <&gpio 22 GPIO_ACTIVE_LOW>; }; led_sig4: sig4 { label = "green:sig4"; gpios = <&gpio 23 GPIO_ACTIVE_LOW>; }; }; keys { compatible = "gpio-keys"; reset { label = "Reset"; linux,code = ; gpios = <&gpio 17 GPIO_ACTIVE_LOW>; debounce-interval = <60>; }; }; beeper { compatible = "gpio-beeper"; gpios = <&gpio 4 GPIO_ACTIVE_HIGH>; }; }; &spi { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <50000000>; m25p,fast-read; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; uboot: partition@0 { label = "u-boot"; reg = <0x000000 0x030000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; macaddr_uboot_2e010: macaddr@2e010 { reg = <0x2e010 0x6>; }; }; }; firmware@30000 { compatible = "denx,uimage"; label = "firmware"; reg = <0x030000 0xfc0000>; }; partition@ff0000 { label = "art"; reg = <0xff0000 0x010000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; cal_art_1000: calibration@1000 { reg = <0x1000 0x440>; }; }; }; }; }; }; &mdio0 { status = "okay"; phy0: ethernet-phy@0 { reg = <0>; qca,ar8327-initvals = < 0x04 0x00080080 /* PORT0 PAD MODE CTRL */ 0x0c 0x07600000 /* PORT6 PAD MODE CTRL */ 0x50 0xcc35cc35 /* LED_CTRL0 */ 0x54 0x00000000 /* LED_CTRL1 */ 0x58 0x00000000 /* LED_CTRL2 */ 0x5c 0x03ffff00 /* LED_CTRL3 */ 0x7c 0x0000007e /* PORT0_STATUS */ 0x94 0x0000007e /* PORT6 STATUS */ >; }; }; ð0 { status = "okay"; pll-data = <0x56000000 0x00000101 0x00001616>; phy-handle = <&phy0>; nvmem-cells = <&macaddr_uboot_2e010>; nvmem-cell-names = "mac-address"; }; &wmac { status = "okay"; nvmem-cells = <&cal_art_1000>; nvmem-cell-names = "calibration"; }; &pcie0 { status = "okay"; };