From c34d9452d4e5d98a655d7b625e85466320885416 Mon Sep 17 00:00:00 2001
From: Christian Marangi <ansuelsmth@gmail.com>
Date: Thu, 4 Jan 2024 22:30:41 +0100
Subject: [PATCH 4/4] net: phy: at803x: make read_status more generic

Make read_status more generic in preparation on moving it to shared
library as other PHY Family Driver will have the exact same
implementation.

The only specific part was a check for AR8031/33 if 1000basex was used.
The check is moved to a dedicated function specific for those PHYs.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/phy/at803x.c | 17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)

--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -1020,13 +1020,9 @@ static int at803x_read_specific_status(s
 
 static int at803x_read_status(struct phy_device *phydev)
 {
-	struct at803x_priv *priv = phydev->priv;
 	struct at803x_ss_mask ss_mask = { 0 };
 	int err, old_link = phydev->link;
 
-	if (priv->is_1000basex)
-		return genphy_c37_read_status(phydev);
-
 	/* Update the link, but return if there was an error */
 	err = genphy_update_link(phydev);
 	if (err)
@@ -1618,6 +1614,17 @@ static int at8031_config_intr(struct phy
 	return at803x_config_intr(phydev);
 }
 
+/* AR8031 and AR8033 share the same read status logic */
+static int at8031_read_status(struct phy_device *phydev)
+{
+	struct at803x_priv *priv = phydev->priv;
+
+	if (priv->is_1000basex)
+		return genphy_c37_read_status(phydev);
+
+	return at803x_read_status(phydev);
+}
+
 /* AR8031 and AR8035 share the same cable test get status reg */
 static int at8031_cable_test_get_status(struct phy_device *phydev,
 					bool *finished)
@@ -2281,7 +2288,7 @@ static struct phy_driver at803x_driver[]
 	.read_page		= at803x_read_page,
 	.write_page		= at803x_write_page,
 	.get_features		= at803x_get_features,
-	.read_status		= at803x_read_status,
+	.read_status		= at8031_read_status,
 	.config_intr		= at8031_config_intr,
 	.handle_interrupt	= at803x_handle_interrupt,
 	.get_tunable		= at803x_get_tunable,