From 89017cac5f6fbaab23955818c31b3c7f1eb26f4a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= Date: Fri, 1 Mar 2024 12:43:05 +0200 Subject: [PATCH 45/48] net: dsa: mt7530: simplify link operations MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The "MT7621 Giga Switch Programming Guide v0.3", "MT7531 Reference Manual for Development Board v1.0", and "MT7988A Wi-Fi 7 Generation Router Platform: Datasheet (Open Version) v0.1" documents show that these bits are enabled at reset: PMCR_IFG_XMIT(1) (not part of PMCR_LINK_SETTINGS_MASK) PMCR_MAC_MODE (not part of PMCR_LINK_SETTINGS_MASK) PMCR_TX_EN PMCR_RX_EN PMCR_BACKOFF_EN (not part of PMCR_LINK_SETTINGS_MASK) PMCR_BACKPR_EN (not part of PMCR_LINK_SETTINGS_MASK) PMCR_TX_FC_EN PMCR_RX_FC_EN These bits also don't exist on the MT7530_PMCR_P(6) register of the switch on the MT7988 SoC: PMCR_IFG_XMIT() PMCR_MAC_MODE PMCR_BACKOFF_EN PMCR_BACKPR_EN Remove the setting of the bits not part of PMCR_LINK_SETTINGS_MASK on phylink_mac_config as they're already set. The bit for setting the port on force mode is already done on mt7530_setup() and mt7531_setup_common(). So get rid of PMCR_FORCE_MODE_ID() which helped determine which bit to use for the switch model. Signed-off-by: Arınç ÜNAL Signed-off-by: Paolo Abeni --- drivers/net/dsa/mt7530.c | 12 +----------- drivers/net/dsa/mt7530.h | 2 -- 2 files changed, 1 insertion(+), 13 deletions(-) --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -2883,23 +2883,13 @@ mt753x_phylink_mac_config(struct dsa_swi const struct phylink_link_state *state) { struct mt7530_priv *priv = ds->priv; - u32 mcr_cur, mcr_new; if ((port == 5 || port == 6) && priv->info->mac_port_config) priv->info->mac_port_config(ds, port, mode, state->interface); - mcr_cur = mt7530_read(priv, MT7530_PMCR_P(port)); - mcr_new = mcr_cur; - mcr_new &= ~PMCR_LINK_SETTINGS_MASK; - mcr_new |= PMCR_IFG_XMIT(1) | PMCR_MAC_MODE | PMCR_BACKOFF_EN | - PMCR_BACKPR_EN | PMCR_FORCE_MODE_ID(priv->id); - /* Are we connected to external phy */ if (port == 5 && dsa_is_user_port(ds, 5)) - mcr_new |= PMCR_EXT_PHY; - - if (mcr_new != mcr_cur) - mt7530_write(priv, MT7530_PMCR_P(port), mcr_new); + mt7530_set(priv, MT7530_PMCR_P(port), PMCR_EXT_PHY); } static void mt753x_phylink_mac_link_down(struct dsa_switch *ds, int port, --- a/drivers/net/dsa/mt7530.h +++ b/drivers/net/dsa/mt7530.h @@ -333,8 +333,6 @@ enum mt7530_vlan_port_acc_frm { MT7531_FORCE_DPX | \ MT7531_FORCE_RX_FC | \ MT7531_FORCE_TX_FC) -#define PMCR_FORCE_MODE_ID(id) ((((id) == ID_MT7531) || ((id) == ID_MT7988)) ? \ - MT7531_FORCE_MODE : PMCR_FORCE_MODE) #define PMCR_LINK_SETTINGS_MASK (PMCR_TX_EN | PMCR_FORCE_SPEED_1000 | \ PMCR_RX_EN | PMCR_FORCE_SPEED_100 | \ PMCR_TX_FC_EN | PMCR_RX_FC_EN | \