From patchwork Tue Feb 6 19:47:51 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Eric Woudstra X-Patchwork-Id: 13547762 X-Patchwork-Delegate: kuba@kernel.org From: Eric Woudstra To: "David S. Miller" , Eric Dumazet , Jakub Kicinski , Paolo Abeni , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Andrew Lunn , Heiner Kallweit , Russell King , Matthias Brugger , AngeloGioacchino Del Regno , "Frank Wunderlich" , Daniel Golle , Lucien Jheng , Zhi-Jun You Cc: netdev@vger.kernel.org, devicetree@vger.kernel.org, Eric Woudstra Subject: [PATCH net-next 2/2] net: phy: air_en8811h: Add the Airoha EN8811H PHY driver Date: Tue, 6 Feb 2024 20:47:51 +0100 Message-ID: <20240206194751.1901802-3-ericwouds@gmail.com> X-Mailer: git-send-email 2.42.1 In-Reply-To: <20240206194751.1901802-1-ericwouds@gmail.com> References: <20240206194751.1901802-1-ericwouds@gmail.com> Precedence: bulk X-Mailing-List: netdev@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-Patchwork-Delegate: kuba@kernel.org * Source originated from airoha's en8811h v1.2.1 driver * Moved air_en8811h.h to air_en8811h.c * Removed air_pbus_reg_write() as it writes to another device on mdio-bus * Load firmware from /lib/firmware/airoha/ instead of /lib/firmware/ * Added .get_rate_matching() * Use generic phy_read/write() and phy_read/write_mmd() * Edited .get_features() to use generic C45 functions * Edited .config_aneg() and .read_status() to use a mix of generic C22/C45 * Use led handling functions from mediatek-ge-soc.c * Simplified led handling by storing led rules * Cleanup macro definitions * Cleanup code to pass checkpatch.pl * General code cleanup Changes from original RFC patch: * Use the correct order in Kconfig and Makefile * Change some register naming to correspond with datasheet * Use phy_driver .read_page() and .write_page() * Use module_phy_driver() * Use get_unaligned_le16() instead of macro * In .config_aneg() and .read_status() use genphy_xxx() C22 * Use another vendor register to read real speed * Load firmware only once and store firmware version * Apply 2.5G LPA work-around (firmware before 24011202) * Read 2.5G LPA from vendor register (firmware 24011202 and later) Changes to be committed: modified: drivers/net/phy/Kconfig modified: drivers/net/phy/Makefile new file: drivers/net/phy/air_en8811h.c Signed-off-by: Eric Woudstra --- drivers/net/phy/Kconfig | 5 + drivers/net/phy/Makefile | 1 + drivers/net/phy/air_en8811h.c | 1006 +++++++++++++++++++++++++++++++++ 3 files changed, 1012 insertions(+) create mode 100644 drivers/net/phy/air_en8811h.c --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -69,6 +69,11 @@ config SFP comment "MII PHY device drivers" +config AIR_EN8811H_PHY + tristate "Airoha EN8811H 2.5 Gigabit PHY" + help + Currently supports the Airoha EN8811H PHY. + config AMD_PHY tristate "AMD and Altima PHYs" help --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -32,6 +32,7 @@ obj-y += $(sfp-obj-y) $(sfp-obj-m) obj-$(CONFIG_ADIN_PHY) += adin.o obj-$(CONFIG_ADIN1100_PHY) += adin1100.o +obj-$(CONFIG_AIR_EN8811H_PHY) += air_en8811h.o obj-$(CONFIG_AMD_PHY) += amd.o obj-$(CONFIG_AQUANTIA_PHY) += aquantia/ obj-$(CONFIG_AX88796B_PHY) += ax88796b.o --- /dev/null +++ b/drivers/net/phy/air_en8811h.c @@ -0,0 +1,1006 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Driver for Airoha Ethernet PHYs + * + * Currently supporting the EN8811H. + * + * Limitations of the EN8811H: + * - Only full duplex supported + * - Forced speed (AN off) is not supported by hardware (100Mbps) + * + * Source originated from airoha's en8811h.c and en8811h.h v1.2.1 + * + * Copyright (C) 2023 Airoha Technology Corp. + */ + +#include +#include +#include +#include + +#define EN8811H_PHY_ID 0x03a2a411 + +#define EN8811H_MD32_DM "airoha/EthMD32.dm.bin" +#define EN8811H_MD32_DSP "airoha/EthMD32.DSP.bin" + +#define AIR_FW_ADDR_DM 0x00000000 +#define AIR_FW_ADDR_DSP 0x00100000 + +/* u32 (DWORD) component macros */ +#define LOWORD(d) ((u16)(u32)(d)) +#define HIWORD(d) ((u16)(((u32)(d)) >> 16)) + +/* MII Registers */ +#define AIR_AUX_CTRL_STATUS 0x1d +#define AIR_AUX_CTRL_STATUS_SPEED_MASK GENMASK(4, 2) +#define AIR_AUX_CTRL_STATUS_SPEED_100 0x4 +#define AIR_AUX_CTRL_STATUS_SPEED_1000 0x8 +#define AIR_AUX_CTRL_STATUS_SPEED_2500 0xc + +#define AIR_EXT_PAGE_ACCESS 0x1f +#define AIR_PHY_PAGE_STANDARD 0x0000 +#define AIR_PHY_PAGE_EXTENDED_4 0x0004 + +/* MII Registers Page 4*/ +#define AIR_PBUS_MODE 0x10 +#define AIR_PBUS_MODE_ADDR_FIXED 0x0000 +#define AIR_PBUS_MODE_ADDR_INCR BIT(15) +#define AIR_PBUS_WR_ADDR_HIGH 0x11 +#define AIR_PBUS_WR_ADDR_LOW 0x12 +#define AIR_PBUS_WR_DATA_HIGH 0x13 +#define AIR_PBUS_WR_DATA_LOW 0x14 +#define AIR_PBUS_RD_ADDR_HIGH 0x15 +#define AIR_PBUS_RD_ADDR_LOW 0x16 +#define AIR_PBUS_RD_DATA_HIGH 0x17 +#define AIR_PBUS_RD_DATA_LOW 0x18 + +/* Registers on MDIO_MMD_VEND1 */ +#define EN8811H_PHY_FW_STATUS 0x8009 +#define EN8811H_PHY_READY 0x02 + +#define AIR_PHY_HOST_CMD_1 0x800c +#define AIR_PHY_HOST_CMD_1_MODE1 0x0 +#define AIR_PHY_HOST_CMD_2 0x800d +#define AIR_PHY_HOST_CMD_2_MODE1 0x0 +#define AIR_PHY_HOST_CMD_3 0x800e +#define AIR_PHY_HOST_CMD_3_MODE1 0x1101 +#define AIR_PHY_HOST_CMD_3_DOCMD 0x1100 +#define AIR_PHY_HOST_CMD_4 0x800f +#define AIR_PHY_HOST_CMD_4_MODE1 0x0002 +#define AIR_PHY_HOST_CMD_4_INTCLR 0x00e4 + +/* Registers on MDIO_MMD_VEND2 */ +#define AIR_PHY_LED_BCR 0x021 +#define AIR_PHY_LED_BCR_MODE_MASK GENMASK(1, 0) +#define AIR_PHY_LED_BCR_TIME_TEST BIT(2) +#define AIR_PHY_LED_BCR_CLK_EN BIT(3) +#define AIR_PHY_LED_BCR_EXT_CTRL BIT(15) + +#define AIR_PHY_LED_DUR_ON 0x022 + +#define AIR_PHY_LED_DUR_BLINK 0x023 + +#define AIR_PHY_LED_ON(i) (0x024 + ((i) * 2)) +#define AIR_PHY_LED_ON_MASK (GENMASK(6, 0) | BIT(8)) +#define AIR_PHY_LED_ON_LINK1000 BIT(0) +#define AIR_PHY_LED_ON_LINK100 BIT(1) +#define AIR_PHY_LED_ON_LINK10 BIT(2) +#define AIR_PHY_LED_ON_LINKDOWN BIT(3) +#define AIR_PHY_LED_ON_FDX BIT(4) /* Full duplex */ +#define AIR_PHY_LED_ON_HDX BIT(5) /* Half duplex */ +#define AIR_PHY_LED_ON_FORCE_ON BIT(6) +#define AIR_PHY_LED_ON_LINK2500 BIT(8) +#define AIR_PHY_LED_ON_POLARITY BIT(14) +#define AIR_PHY_LED_ON_ENABLE BIT(15) + +#define AIR_PHY_LED_BLINK(i) (0x025 + ((i) * 2)) +#define AIR_PHY_LED_BLINK_1000TX BIT(0) +#define AIR_PHY_LED_BLINK_1000RX BIT(1) +#define AIR_PHY_LED_BLINK_100TX BIT(2) +#define AIR_PHY_LED_BLINK_100RX BIT(3) +#define AIR_PHY_LED_BLINK_10TX BIT(4) +#define AIR_PHY_LED_BLINK_10RX BIT(5) +#define AIR_PHY_LED_BLINK_COLLISION BIT(6) +#define AIR_PHY_LED_BLINK_RX_CRC_ERR BIT(7) +#define AIR_PHY_LED_BLINK_RX_IDLE_ERR BIT(8) +#define AIR_PHY_LED_BLINK_FORCE_BLINK BIT(9) +#define AIR_PHY_LED_BLINK_2500TX BIT(10) +#define AIR_PHY_LED_BLINK_2500RX BIT(11) + +/* Registers on BUCKPBUS */ +#define EN8811H_2P5G_LPA 0x3b30 +#define EN8811H_2P5G_LPA_2P5G BIT(0) + +#define EN8811H_FW_VERSION 0x3b3c + +#define EN8811H_POLARITY 0xca0f8 +#define EN8811H_POLARITY_TX_NORMAL BIT(0) +#define EN8811H_POLARITY_RX_REVERSE BIT(1) + +#define EN8811H_GPIO_OUTPUT 0xcf8b8 +#define EN8811H_GPIO_OUTPUT_345 (BIT(3) | BIT(4) | BIT(5)) + +#define EN8811H_FW_CTRL_1 0x0f0018 +#define EN8811H_FW_CTRL_1_START 0x0 +#define EN8811H_FW_CTRL_1_FINISH 0x1 +#define EN8811H_FW_CTRL_2 0x800000 +#define EN8811H_FW_CTRL_2_LOADING BIT(11) + +#define EN8811H_LED_COUNT 3 + +/* GPIO5 <-> BASE_T_LED0 + * GPIO4 <-> BASE_T_LED1 + * GPIO3 <-> BASE_T_LED2 + * + * Default setup suitable for 2 leds connected: + * 100M link up triggers led0, only led0 blinking on traffic + * 1000M link up triggers led1, only led1 blinking on traffic + * 2500M link up triggers led0 and led1, both blinking on traffic + * Also suitable for 1 led connected: + * any link up triggers led2 + */ +#define AIR_DEFAULT_TRIGGER_LED0 (BIT(TRIGGER_NETDEV_LINK_2500) | \ + BIT(TRIGGER_NETDEV_LINK_100) | \ + BIT(TRIGGER_NETDEV_RX) | \ + BIT(TRIGGER_NETDEV_TX)) +#define AIR_DEFAULT_TRIGGER_LED1 (BIT(TRIGGER_NETDEV_LINK_2500) | \ + BIT(TRIGGER_NETDEV_LINK_1000) | \ + BIT(TRIGGER_NETDEV_RX) | \ + BIT(TRIGGER_NETDEV_TX)) +#define AIR_DEFAULT_TRIGGER_LED2 BIT(TRIGGER_NETDEV_LINK) + +struct led { + unsigned long rules; + unsigned long state; +}; + +struct en8811h_priv { + u32 firmware_version; + struct led led[EN8811H_LED_COUNT]; +}; + +enum { + AIR_PHY_LED_STATE_FORCE_ON, + AIR_PHY_LED_STATE_FORCE_BLINK, +}; + +enum { + AIR_PHY_LED_DUR_BLINK_32M, + AIR_PHY_LED_DUR_BLINK_64M, + AIR_PHY_LED_DUR_BLINK_128M, + AIR_PHY_LED_DUR_BLINK_256M, + AIR_PHY_LED_DUR_BLINK_512M, + AIR_PHY_LED_DUR_BLINK_1024M, +}; + +enum { + AIR_LED_DISABLE, + AIR_LED_ENABLE, +}; + +enum { + AIR_ACTIVE_LOW, + AIR_ACTIVE_HIGH, +}; + +enum { + AIR_LED_MODE_DISABLE, + AIR_LED_MODE_USER_DEFINE, +}; + +#define AIR_PHY_LED_DUR_UNIT 1024 +#define AIR_PHY_LED_DUR (AIR_PHY_LED_DUR_UNIT << AIR_PHY_LED_DUR_BLINK_64M) + +static const unsigned long en8811h_led_trig = (BIT(TRIGGER_NETDEV_FULL_DUPLEX) | + BIT(TRIGGER_NETDEV_LINK) | + BIT(TRIGGER_NETDEV_LINK_10) | + BIT(TRIGGER_NETDEV_LINK_100) | + BIT(TRIGGER_NETDEV_LINK_1000) | + BIT(TRIGGER_NETDEV_LINK_2500) | + BIT(TRIGGER_NETDEV_RX) | + BIT(TRIGGER_NETDEV_TX)); + +static int air_phy_read_page(struct phy_device *phydev) +{ + return __phy_read(phydev, AIR_EXT_PAGE_ACCESS); +} + +static int air_phy_write_page(struct phy_device *phydev, int page) +{ + return __phy_write(phydev, AIR_EXT_PAGE_ACCESS, page); +} + +static int __air_buckpbus_reg_write(struct phy_device *phydev, + u32 pbus_address, u32 pbus_data) +{ + int ret; + + ret = __phy_write(phydev, AIR_PBUS_MODE, AIR_PBUS_MODE_ADDR_FIXED); + if (ret < 0) + return ret; + + ret = __phy_write(phydev, AIR_PBUS_WR_ADDR_HIGH, HIWORD(pbus_address)); + if (ret < 0) + return ret; + + ret = __phy_write(phydev, AIR_PBUS_WR_ADDR_LOW, LOWORD(pbus_address)); + if (ret < 0) + return ret; + + ret = __phy_write(phydev, AIR_PBUS_WR_DATA_HIGH, HIWORD(pbus_data)); + if (ret < 0) + return ret; + + ret = __phy_write(phydev, AIR_PBUS_WR_DATA_LOW, LOWORD(pbus_data)); + if (ret < 0) + return ret; + + return 0; +} + +static int air_buckpbus_reg_write(struct phy_device *phydev, + u32 pbus_address, u32 pbus_data) +{ + int ret, saved_page; + + saved_page = phy_select_page(phydev, AIR_PHY_PAGE_EXTENDED_4); + + ret = __air_buckpbus_reg_write(phydev, pbus_address, pbus_data); + if (ret < 0) + phydev_err(phydev, "%s 0x%08x failed: %d\n", __func__, + pbus_address, ret); + + return phy_restore_page(phydev, saved_page, ret); +; +} + +static int __air_buckpbus_reg_read(struct phy_device *phydev, + u32 pbus_address, u32 *pbus_data) +{ + int pbus_data_low, pbus_data_high; + int ret; + + ret = __phy_write(phydev, AIR_PBUS_MODE, AIR_PBUS_MODE_ADDR_FIXED); + if (ret < 0) + return ret; + + ret = __phy_write(phydev, AIR_PBUS_RD_ADDR_HIGH, HIWORD(pbus_address)); + if (ret < 0) + return ret; + + ret = __phy_write(phydev, AIR_PBUS_RD_ADDR_LOW, LOWORD(pbus_address)); + if (ret < 0) + return ret; + + pbus_data_high = __phy_read(phydev, AIR_PBUS_RD_DATA_HIGH); + if (pbus_data_high < 0) + return ret; + + pbus_data_low = __phy_read(phydev, AIR_PBUS_RD_DATA_LOW); + if (pbus_data_low < 0) + return ret; + + *pbus_data = (u16)pbus_data_low | ((u32)(u16)pbus_data_high << 16); + return 0; +} + +static int air_buckpbus_reg_read(struct phy_device *phydev, + u32 pbus_address, u32 *pbus_data) +{ + int ret, saved_page; + + saved_page = phy_select_page(phydev, AIR_PHY_PAGE_EXTENDED_4); + + ret = __air_buckpbus_reg_read(phydev, pbus_address, pbus_data); + if (ret < 0) + phydev_err(phydev, "%s 0x%08x failed: %d\n", __func__, + pbus_address, ret); + + return phy_restore_page(phydev, saved_page, ret); +} + +static int __air_write_buf(struct phy_device *phydev, u32 address, + const struct firmware *fw) +{ + unsigned int offset; + int ret; + u16 val; + + ret = __phy_write(phydev, AIR_PBUS_MODE, AIR_PBUS_MODE_ADDR_INCR); + if (ret < 0) + return ret; + + ret = __phy_write(phydev, AIR_PBUS_WR_ADDR_HIGH, HIWORD(address)); + if (ret < 0) + return ret; + + ret = __phy_write(phydev, AIR_PBUS_WR_ADDR_LOW, LOWORD(address)); + if (ret < 0) + return ret; + + for (offset = 0; offset < fw->size; offset += 4) { + val = get_unaligned_le16(&fw->data[offset + 2]); + ret = __phy_write(phydev, AIR_PBUS_WR_DATA_HIGH, val); + if (ret < 0) + return ret; + + val = get_unaligned_le16(&fw->data[offset]); + ret = __phy_write(phydev, AIR_PBUS_WR_DATA_LOW, val); + if (ret < 0) + return ret; + } + + return 0; +} + +static int air_write_buf(struct phy_device *phydev, u32 address, + const struct firmware *fw) +{ + int ret, saved_page; + + saved_page = phy_select_page(phydev, AIR_PHY_PAGE_EXTENDED_4); + + ret = __air_write_buf(phydev, address, fw); + if (ret < 0) + phydev_err(phydev, "%s 0x%08x failed: %d\n", __func__, + address, ret); + + return phy_restore_page(phydev, saved_page, ret); +} + +static int en8811h_load_firmware(struct phy_device *phydev) +{ + struct device *dev = &phydev->mdio.dev; + const struct firmware *fw1, *fw2; + u32 pbus_value; + int ret; + + ret = request_firmware_direct(&fw1, EN8811H_MD32_DM, dev); + if (ret < 0) + return ret; + + ret = request_firmware_direct(&fw2, EN8811H_MD32_DSP, dev); + if (ret < 0) + goto en8811h_load_firmware_rel1; + + ret = air_buckpbus_reg_write(phydev, EN8811H_FW_CTRL_1, + EN8811H_FW_CTRL_1_START); + if (ret < 0) + goto en8811h_load_firmware_out; + + ret = air_buckpbus_reg_read(phydev, EN8811H_FW_CTRL_2, &pbus_value); + if (ret < 0) + goto en8811h_load_firmware_out; + pbus_value |= EN8811H_FW_CTRL_2_LOADING; + ret = air_buckpbus_reg_write(phydev, EN8811H_FW_CTRL_2, pbus_value); + if (ret < 0) + goto en8811h_load_firmware_out; + + ret = air_write_buf(phydev, AIR_FW_ADDR_DM, fw1); + if (ret < 0) + goto en8811h_load_firmware_out; + + ret = air_write_buf(phydev, AIR_FW_ADDR_DSP, fw2); + if (ret < 0) + goto en8811h_load_firmware_out; + + ret = air_buckpbus_reg_read(phydev, EN8811H_FW_CTRL_2, &pbus_value); + if (ret < 0) + goto en8811h_load_firmware_out; + pbus_value &= ~EN8811H_FW_CTRL_2_LOADING; + ret = air_buckpbus_reg_write(phydev, EN8811H_FW_CTRL_2, pbus_value); + if (ret < 0) + goto en8811h_load_firmware_out; + + ret = air_buckpbus_reg_write(phydev, EN8811H_FW_CTRL_1, + EN8811H_FW_CTRL_1_FINISH); + if (ret < 0) + goto en8811h_load_firmware_out; + + ret = 0; + +en8811h_load_firmware_out: + release_firmware(fw2); + +en8811h_load_firmware_rel1: + release_firmware(fw1); + + if (ret < 0) + phydev_err(phydev, "Load firmware failed: %d\n", ret); + + return ret; +} + +static int en8811h_restart_host(struct phy_device *phydev) +{ + int ret; + + ret = air_buckpbus_reg_write(phydev, EN8811H_FW_CTRL_1, + EN8811H_FW_CTRL_1_START); + if (ret < 0) + return ret; + + return air_buckpbus_reg_write(phydev, EN8811H_FW_CTRL_1, + EN8811H_FW_CTRL_1_FINISH); +} + +static int air_hw_led_on_set(struct phy_device *phydev, u8 index, bool on) +{ + struct en8811h_priv *priv = phydev->priv; + bool changed; + + if (index >= EN8811H_LED_COUNT) + return -EINVAL; + + if (on) + changed = !test_and_set_bit(AIR_PHY_LED_STATE_FORCE_ON, + &priv->led[index].state); + else + changed = !!test_and_clear_bit(AIR_PHY_LED_STATE_FORCE_ON, + &priv->led[index].state); + + changed |= (priv->led[index].rules != 0); + + if (changed) + return phy_modify_mmd(phydev, MDIO_MMD_VEND2, + AIR_PHY_LED_ON(index), + AIR_PHY_LED_ON_MASK, + on ? AIR_PHY_LED_ON_FORCE_ON : 0); + + return 0; +} + +static int air_hw_led_blink_set(struct phy_device *phydev, u8 index, + bool blinking) +{ + struct en8811h_priv *priv = phydev->priv; + bool changed; + + if (index >= EN8811H_LED_COUNT) + return -EINVAL; + + if (blinking) + changed = !test_and_set_bit(AIR_PHY_LED_STATE_FORCE_BLINK, + &priv->led[index].state); + else + changed = !!test_and_clear_bit(AIR_PHY_LED_STATE_FORCE_BLINK, + &priv->led[index].state); + + changed |= (priv->led[index].rules != 0); + + if (changed) + return phy_write_mmd(phydev, MDIO_MMD_VEND2, + AIR_PHY_LED_BLINK(index), + blinking ? + AIR_PHY_LED_BLINK_FORCE_BLINK : 0); + else + return 0; +} + +static int air_led_blink_set(struct phy_device *phydev, u8 index, + unsigned long *delay_on, + unsigned long *delay_off) +{ + struct en8811h_priv *priv = phydev->priv; + bool blinking = false; + int err; + + if (index >= EN8811H_LED_COUNT) + return -EINVAL; + + if (delay_on && delay_off && (*delay_on > 0) && (*delay_off > 0)) { + blinking = true; + *delay_on = 50; + *delay_off = 50; + } + + err = air_hw_led_blink_set(phydev, index, blinking); + if (err) + return err; + + /* led-blink set, so switch led-on off */ + err = air_hw_led_on_set(phydev, index, false); + if (err) + return err; + + /* hw-control is off*/ + if (!!test_bit(AIR_PHY_LED_STATE_FORCE_BLINK, &priv->led[index].state)) + priv->led[index].rules = 0; + + return 0; +} + +static int air_led_brightness_set(struct phy_device *phydev, u8 index, + enum led_brightness value) +{ + struct en8811h_priv *priv = phydev->priv; + int err; + + if (index >= EN8811H_LED_COUNT) + return -EINVAL; + + /* led-on set, so switch led-blink off */ + err = air_hw_led_blink_set(phydev, index, false); + if (err) + return err; + + err = air_hw_led_on_set(phydev, index, (value != LED_OFF)); + if (err) + return err; + + /* hw-control is off */ + if (!!test_bit(AIR_PHY_LED_STATE_FORCE_ON, &priv->led[index].state)) + priv->led[index].rules = 0; + + return 0; +} + +static int air_led_hw_control_get(struct phy_device *phydev, u8 index, + unsigned long *rules) +{ + struct en8811h_priv *priv = phydev->priv; + + if (index >= EN8811H_LED_COUNT) + return -EINVAL; + + *rules = priv->led[index].rules; + + return 0; +}; + +static int air_led_hw_control_set(struct phy_device *phydev, u8 index, + unsigned long rules) +{ + struct en8811h_priv *priv = phydev->priv; + u16 on = 0, blink = 0; + int ret; + + priv->led[index].rules = rules; + + if (index >= EN8811H_LED_COUNT) + return -EINVAL; + + if (rules & (BIT(TRIGGER_NETDEV_LINK_10) | BIT(TRIGGER_NETDEV_LINK))) { + on |= AIR_PHY_LED_ON_LINK10; + if (rules & BIT(TRIGGER_NETDEV_RX)) + blink |= AIR_PHY_LED_BLINK_10RX; + if (rules & BIT(TRIGGER_NETDEV_TX)) + blink |= AIR_PHY_LED_BLINK_10TX; + } + + if (rules & (BIT(TRIGGER_NETDEV_LINK_100) | BIT(TRIGGER_NETDEV_LINK))) { + on |= AIR_PHY_LED_ON_LINK100; + if (rules & BIT(TRIGGER_NETDEV_RX)) + blink |= AIR_PHY_LED_BLINK_100RX; + if (rules & BIT(TRIGGER_NETDEV_TX)) + blink |= AIR_PHY_LED_BLINK_100TX; + } + + if (rules & (BIT(TRIGGER_NETDEV_LINK_1000) | BIT(TRIGGER_NETDEV_LINK))) { + on |= AIR_PHY_LED_ON_LINK1000; + if (rules & BIT(TRIGGER_NETDEV_RX)) + blink |= AIR_PHY_LED_BLINK_1000RX; + if (rules & BIT(TRIGGER_NETDEV_TX)) + blink |= AIR_PHY_LED_BLINK_1000TX; + } + + if (rules & (BIT(TRIGGER_NETDEV_LINK_2500) | BIT(TRIGGER_NETDEV_LINK))) { + on |= AIR_PHY_LED_ON_LINK2500; + if (rules & BIT(TRIGGER_NETDEV_RX)) + blink |= AIR_PHY_LED_BLINK_2500RX; + if (rules & BIT(TRIGGER_NETDEV_TX)) + blink |= AIR_PHY_LED_BLINK_2500TX; + } + + if (on == 0) { + if (rules & BIT(TRIGGER_NETDEV_RX)) { + blink |= AIR_PHY_LED_BLINK_10RX | + AIR_PHY_LED_BLINK_100RX | + AIR_PHY_LED_BLINK_1000RX | + AIR_PHY_LED_BLINK_2500RX; + } + if (rules & BIT(TRIGGER_NETDEV_TX)) { + blink |= AIR_PHY_LED_BLINK_10TX | + AIR_PHY_LED_BLINK_100TX | + AIR_PHY_LED_BLINK_1000TX | + AIR_PHY_LED_BLINK_2500TX; + } + } + + if (rules & BIT(TRIGGER_NETDEV_FULL_DUPLEX)) + on |= AIR_PHY_LED_ON_FDX; + + if (rules & BIT(TRIGGER_NETDEV_HALF_DUPLEX)) + on |= AIR_PHY_LED_ON_HDX; + + if (blink || on) { + /* switch hw-control on, so led-on and led-blink are off */ + clear_bit(AIR_PHY_LED_STATE_FORCE_ON, &priv->led[index].state); + clear_bit(AIR_PHY_LED_STATE_FORCE_BLINK, &priv->led[index].state); + } else { + priv->led[index].rules = 0; + } + + ret = phy_modify_mmd(phydev, MDIO_MMD_VEND2, AIR_PHY_LED_ON(index), + AIR_PHY_LED_ON_MASK, on); + + if (ret < 0) + return ret; + + return phy_write_mmd(phydev, MDIO_MMD_VEND2, AIR_PHY_LED_BLINK(index), + blink); +}; + +static int air_led_init(struct phy_device *phydev, u8 index, u8 state, u8 pol) +{ + int cl45_data; + int err; + + if (index >= EN8811H_LED_COUNT) + return -EINVAL; + + cl45_data = phy_read_mmd(phydev, MDIO_MMD_VEND2, AIR_PHY_LED_ON(index)); + if (cl45_data < 0) + return cl45_data; + + if (state == AIR_LED_ENABLE) + cl45_data |= AIR_PHY_LED_ON_ENABLE; + else + cl45_data &= ~AIR_PHY_LED_ON_ENABLE; + + if (pol == AIR_ACTIVE_HIGH) + cl45_data |= AIR_PHY_LED_ON_POLARITY; + else + cl45_data &= ~AIR_PHY_LED_ON_POLARITY; + + err = phy_write_mmd(phydev, MDIO_MMD_VEND2, AIR_PHY_LED_ON(index), + cl45_data); + if (err < 0) + return err; + + return 0; +} + +static int air_leds_init(struct phy_device *phydev, int num, int dur, int mode) +{ + struct en8811h_priv *priv = phydev->priv; + int cl45_data = dur; + int ret, i; + + ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, AIR_PHY_LED_DUR_BLINK, + cl45_data); + if (ret < 0) + return ret; + + cl45_data >>= 1; + ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, AIR_PHY_LED_DUR_ON, + cl45_data); + if (ret < 0) + return ret; + + cl45_data = phy_read_mmd(phydev, MDIO_MMD_VEND2, AIR_PHY_LED_BCR); + if (cl45_data < 0) + return cl45_data; + + switch (mode) { + case AIR_LED_MODE_DISABLE: + cl45_data &= ~AIR_PHY_LED_BCR_EXT_CTRL; + cl45_data &= ~AIR_PHY_LED_BCR_MODE_MASK; + break; + case AIR_LED_MODE_USER_DEFINE: + cl45_data |= AIR_PHY_LED_BCR_EXT_CTRL; + cl45_data |= AIR_PHY_LED_BCR_CLK_EN; + break; + default: + phydev_err(phydev, "LED mode %d is not supported\n", mode); + return -EINVAL; + } + + ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, AIR_PHY_LED_BCR, cl45_data); + if (ret < 0) + return ret; + + for (i = 0; i < num; ++i) { + ret = air_led_init(phydev, i, AIR_LED_ENABLE, AIR_ACTIVE_HIGH); + if (ret < 0) { + phydev_err(phydev, "LED%d init failed: %d\n", i, ret); + return ret; + } + air_led_hw_control_set(phydev, i, priv->led[i].rules); + } + + return 0; +} + +static int en8811h_led_hw_is_supported(struct phy_device *phydev, u8 index, + unsigned long rules) +{ + if (index >= EN8811H_LED_COUNT) + return -EINVAL; + + /* All combinations of the supported triggers are allowed */ + if (rules & ~en8811h_led_trig) + return -EOPNOTSUPP; + + return 0; +}; + +static int en8811h_probe(struct phy_device *phydev) +{ + struct en8811h_priv *priv; + + priv = devm_kzalloc(&phydev->mdio.dev, sizeof(struct en8811h_priv), + GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->led[0].rules = AIR_DEFAULT_TRIGGER_LED0; + priv->led[1].rules = AIR_DEFAULT_TRIGGER_LED1; + priv->led[2].rules = AIR_DEFAULT_TRIGGER_LED2; + + phydev->priv = priv; + + /* MDIO_DEVS1/2 empty, so set mmds_present bits here */ + phydev->c45_ids.mmds_present |= MDIO_DEVS_PMAPMD | MDIO_DEVS_AN; + + return 0; +} + +static int en8811h_config_init(struct phy_device *phydev) +{ + struct en8811h_priv *priv = phydev->priv; + struct device *dev = &phydev->mdio.dev; + int ret, pollret, reg_value; + u32 pbus_value; + + if (!priv->firmware_version) + ret = en8811h_load_firmware(phydev); + else + ret = en8811h_restart_host(phydev); + if (ret < 0) + return ret; + + /* Because of mdio-lock, may have to wait for multiple loads */ + pollret = phy_read_mmd_poll_timeout(phydev, MDIO_MMD_VEND1, + EN8811H_PHY_FW_STATUS, reg_value, + reg_value == EN8811H_PHY_READY, + 20000, 7500000, true); + + ret = air_buckpbus_reg_read(phydev, EN8811H_FW_VERSION, &pbus_value); + if (ret < 0) + return ret; + + if (pollret || !pbus_value) { + phydev_err(phydev, "Firmware not ready: 0x%x\n", reg_value); + return -ENODEV; + } + + if (!priv->firmware_version) { + phydev_info(phydev, "MD32 firmware version: %08x\n", pbus_value); + priv->firmware_version = pbus_value; + } + + /* Select mode 1, the only mode supported */ + ret = phy_write_mmd(phydev, MDIO_MMD_VEND1, AIR_PHY_HOST_CMD_1, + AIR_PHY_HOST_CMD_1_MODE1); + if (ret < 0) + return ret; + ret = phy_write_mmd(phydev, MDIO_MMD_VEND1, AIR_PHY_HOST_CMD_2, + AIR_PHY_HOST_CMD_2_MODE1); + if (ret < 0) + return ret; + ret = phy_write_mmd(phydev, MDIO_MMD_VEND1, AIR_PHY_HOST_CMD_3, + AIR_PHY_HOST_CMD_3_MODE1); + if (ret < 0) + return ret; + ret = phy_write_mmd(phydev, MDIO_MMD_VEND1, AIR_PHY_HOST_CMD_4, + AIR_PHY_HOST_CMD_4_MODE1); + if (ret < 0) + return ret; + + /* Serdes polarity */ + ret = air_buckpbus_reg_read(phydev, EN8811H_POLARITY, &pbus_value); + if (ret < 0) + return ret; + if (device_property_read_bool(dev, "airoha,pnswap-rx")) + pbus_value |= EN8811H_POLARITY_RX_REVERSE; + else + pbus_value &= ~EN8811H_POLARITY_RX_REVERSE; + if (device_property_read_bool(dev, "airoha,pnswap-tx")) + pbus_value &= ~EN8811H_POLARITY_TX_NORMAL; + else + pbus_value |= EN8811H_POLARITY_TX_NORMAL; + ret = air_buckpbus_reg_write(phydev, EN8811H_POLARITY, pbus_value); + if (ret < 0) + return ret; + + ret = air_leds_init(phydev, EN8811H_LED_COUNT, AIR_PHY_LED_DUR, + AIR_LED_MODE_USER_DEFINE); + if (ret < 0) { + phydev_err(phydev, "Failed to initialize leds: %d\n", ret); + return ret; + } + + ret = air_buckpbus_reg_read(phydev, EN8811H_GPIO_OUTPUT, &pbus_value); + if (ret < 0) + return ret; + pbus_value |= EN8811H_GPIO_OUTPUT_345; + ret = air_buckpbus_reg_write(phydev, EN8811H_GPIO_OUTPUT, pbus_value); + if (ret < 0) + return ret; + + return 0; +} + +static int en8811h_get_features(struct phy_device *phydev) +{ + linkmode_set_bit_array(phy_basic_ports_array, + ARRAY_SIZE(phy_basic_ports_array), + phydev->supported); + + return genphy_c45_pma_read_abilities(phydev); +} + +static int en8811h_get_rate_matching(struct phy_device *phydev, + phy_interface_t iface) +{ + return RATE_MATCH_PAUSE; +} + +static int en8811h_config_aneg(struct phy_device *phydev) +{ + bool changed = false; + int err, val; + + val = 0; + if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, + phydev->advertising)) + val |= MDIO_AN_10GBT_CTRL_ADV2_5G; + err = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL, + MDIO_AN_10GBT_CTRL_ADV2_5G, val); + if (err < 0) + return err; + if (err > 0) + changed = true; + + return __genphy_config_aneg(phydev, changed); +} + +static int en8811h_read_status(struct phy_device *phydev) +{ + struct en8811h_priv *priv = phydev->priv; + u32 pbus_value; + int ret, val; + + ret = genphy_update_link(phydev); + if (ret) + return ret; + + phydev->master_slave_get = MASTER_SLAVE_CFG_UNSUPPORTED; + phydev->master_slave_state = MASTER_SLAVE_STATE_UNSUPPORTED; + phydev->speed = SPEED_UNKNOWN; + phydev->duplex = DUPLEX_UNKNOWN; + phydev->pause = 0; + phydev->asym_pause = 0; + + ret = genphy_read_master_slave(phydev); + if (ret < 0) + return ret; + + ret = genphy_read_lpa(phydev); + if (ret < 0) + return ret; + + /* Get link partner 2.5GBASE-T ability from vendor register */ + ret = air_buckpbus_reg_read(phydev, EN8811H_2P5G_LPA, &pbus_value); + if (ret < 0) + return ret; + linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, + phydev->lp_advertising, + pbus_value & EN8811H_2P5G_LPA_2P5G); + + if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete) + phy_resolve_aneg_pause(phydev); + + if (!phydev->link) + return 0; + + /* Get real speed from vendor register */ + val = phy_read(phydev, AIR_AUX_CTRL_STATUS); + if (val < 0) + return val; + switch (val & AIR_AUX_CTRL_STATUS_SPEED_MASK) { + case AIR_AUX_CTRL_STATUS_SPEED_2500: + phydev->speed = SPEED_2500; + break; + case AIR_AUX_CTRL_STATUS_SPEED_1000: + phydev->speed = SPEED_1000; + break; + case AIR_AUX_CTRL_STATUS_SPEED_100: + phydev->speed = SPEED_100; + break; + } + + /* BUG in PHY firmware: MDIO_AN_10GBT_STAT_LP2_5G does not get set. + * Firmware before version 24011202 has no vendor register 2P5G_LPA. + * Assume link partner advertised it if connected at 2500Mbps. + */ + if (priv->firmware_version < 0x24011202) { + linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, + phydev->lp_advertising, + phydev->speed == SPEED_2500); + } + + /* Only supports full duplex */ + phydev->duplex = DUPLEX_FULL; + + return 0; +} + +static int en8811h_clear_intr(struct phy_device *phydev) +{ + int ret; + + ret = phy_write_mmd(phydev, MDIO_MMD_VEND1, AIR_PHY_HOST_CMD_3, + AIR_PHY_HOST_CMD_3_DOCMD); + if (ret < 0) + return ret; + + ret = phy_write_mmd(phydev, MDIO_MMD_VEND1, AIR_PHY_HOST_CMD_4, + AIR_PHY_HOST_CMD_4_INTCLR); + if (ret < 0) + return ret; + + return 0; +} + +static irqreturn_t en8811h_handle_interrupt(struct phy_device *phydev) +{ + int ret; + + ret = en8811h_clear_intr(phydev); + if (ret < 0) { + phy_error(phydev); + return IRQ_NONE; + } + + phy_trigger_machine(phydev); + + return IRQ_HANDLED; +} + +static struct phy_driver en8811h_driver[] = { +{ + PHY_ID_MATCH_MODEL(EN8811H_PHY_ID), + .name = "Airoha EN8811H", + .probe = en8811h_probe, + .get_features = en8811h_get_features, + .config_init = en8811h_config_init, + .get_rate_matching = en8811h_get_rate_matching, + .config_aneg = en8811h_config_aneg, + .read_status = en8811h_read_status, + .config_intr = en8811h_clear_intr, + .handle_interrupt = en8811h_handle_interrupt, + .led_hw_is_supported = en8811h_led_hw_is_supported, + .read_page = air_phy_read_page, + .write_page = air_phy_write_page, + .led_blink_set = air_led_blink_set, + .led_brightness_set = air_led_brightness_set, + .led_hw_control_set = air_led_hw_control_set, + .led_hw_control_get = air_led_hw_control_get, +} }; + +module_phy_driver(en8811h_driver); + +static struct mdio_device_id __maybe_unused en8811h_tbl[] = { + { PHY_ID_MATCH_MODEL(EN8811H_PHY_ID) }, + { } +}; +MODULE_DEVICE_TABLE(mdio, en8811h_tbl); +MODULE_FIRMWARE(EN8811H_MD32_DM); +MODULE_FIRMWARE(EN8811H_MD32_DSP); + +MODULE_DESCRIPTION("Airoha EN8811H PHY drivers"); +MODULE_AUTHOR("Airoha"); +MODULE_AUTHOR("Eric Woudstra "); +MODULE_LICENSE("GPL");