#include "rt3050.dtsi" #include #include / { compatible = "accton,wr6202", "ralink,rt3052-soc"; model = "Accton WR6202"; chosen { bootargs = "console=ttyS0,115200"; }; leds { compatible = "gpio-leds"; wps { label = "blue:wps"; gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; }; 3g { label = "blue:3g"; gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; }; }; keys { compatible = "gpio-keys-polled"; poll-interval = <20>; reset { label = "reset"; gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; linux,code = ; }; wps { label = "wps"; gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; linux,code = ; }; }; flash@1f000000 { compatible = "cfi-flash"; reg = <0x1f000000 0x800000>; bank-width = <2>; device-width = <2>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x0 0x30000>; read-only; }; partition@30000 { label = "u-boot-env"; reg = <0x30000 0x10000>; read-only; }; factory: partition@40000 { compatible = "nvmem-cells"; label = "factory"; reg = <0x40000 0x10000>; #address-cells = <1>; #size-cells = <1>; read-only; eeprom_factory_0: eeprom@0 { reg = <0x0 0x200>; }; macaddr_factory_28: macaddr@28 { reg = <0x28 0x6>; }; }; partition@50000 { compatible = "denx,uimage"; label = "firmware"; reg = <0x50000 0x7b0000>; }; }; }; gpio_export { compatible = "gpio-export"; #size-cells = <0>; usb { gpio-export,name = "usb"; gpio-export,output = <0>; gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; }; }; }; &state_default { gpio { groups = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf"; function = "gpio"; }; }; ðernet { nvmem-cells = <&macaddr_factory_28>; nvmem-cell-names = "mac-address"; }; &esw { mediatek,portmap = <0x3e>; }; &wmac { nvmem-cells = <&eeprom_factory_0>; nvmem-cell-names = "eeprom"; }; &otg { status = "okay"; };