From 60610341f26017aecb77bd3b23d2b51b1e918e94 Mon Sep 17 00:00:00 2001 From: Phil Elwell Date: Fri, 5 May 2023 11:25:48 +0100 Subject: [PATCH 0443/1085] pinctrl: bcm2835: Workaround for edge IRQ loss It has been observed that edge events can be lost when GPIO edges occur close to each other. Investigation suggests this is due to a hardware bug, although no mechanism has been identified. Work around the event loss by moving the IRQ acknowledgement into the main ISR, adding missing events by explicit level-change detection. See: https://forums.raspberrypi.com/viewtopic.php?t=350295 Signed-off-by: Phil Elwell --- drivers/pinctrl/bcm/pinctrl-bcm2835.c | 23 ++++++++++++++++++----- 1 file changed, 18 insertions(+), 5 deletions(-) --- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c +++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c @@ -420,15 +420,32 @@ static void bcm2835_gpio_irq_handle_bank unsigned long events; unsigned offset; unsigned gpio; + u32 levs, levs2; events = bcm2835_gpio_rd(pc, GPEDS0 + bank * 4); + levs = bcm2835_gpio_rd(pc, GPLEV0 + bank * 4); events &= mask; events &= pc->enabled_irq_map[bank]; + bcm2835_gpio_wr(pc, GPEDS0 + bank * 4, events); + +retry: for_each_set_bit(offset, &events, 32) { gpio = (32 * bank) + offset; generic_handle_domain_irq(pc->gpio_chip.irq.domain, gpio); } + events = bcm2835_gpio_rd(pc, GPEDS0 + bank * 4); + levs2 = bcm2835_gpio_rd(pc, GPLEV0 + bank * 4); + + events |= levs2 & ~levs & bcm2835_gpio_rd(pc, GPREN0 + bank * 4); + events |= ~levs2 & levs & bcm2835_gpio_rd(pc, GPFEN0 + bank * 4); + events &= mask; + events &= pc->enabled_irq_map[bank]; + if (events) { + bcm2835_gpio_wr(pc, GPEDS0 + bank * 4, events); + levs = levs2; + goto retry; + } } static void bcm2835_gpio_irq_handler(struct irq_desc *desc) @@ -668,11 +685,7 @@ static int bcm2835_gpio_irq_set_type(str static void bcm2835_gpio_irq_ack(struct irq_data *data) { - struct gpio_chip *chip = irq_data_get_irq_chip_data(data); - struct bcm2835_pinctrl *pc = gpiochip_get_data(chip); - unsigned gpio = irqd_to_hwirq(data); - - bcm2835_gpio_set_bit(pc, GPEDS0, gpio); + /* Nothing to do - the main interrupt handler includes the ACK */ } static int bcm2835_gpio_irq_set_wake(struct irq_data *data, unsigned int on)