From 7be3d49d5abbffe3d16d98c823b5228b4a07eb13 Mon Sep 17 00:00:00 2001 From: Naushir Patuck Date: Fri, 31 Mar 2023 10:33:51 +0100 Subject: [PATCH 0433/1085] drivers: media: imx708: Tidy-ups to address upstream review comments This commit addresses vaious tidy-ups requesed for upstreaming the IMX708 driver. Notably: - Remove #define IMX708_NUM_SUPPLIES and use ARRAY_SIZE() directly - Use dev_err_probe where possible in imx708_probe() - Fix error handling paths in imx708_probe() Signed-off-by: Naushir Patuck --- drivers/media/i2c/imx708.c | 61 +++++++++++++++++--------------------- 1 file changed, 28 insertions(+), 33 deletions(-) --- a/drivers/media/i2c/imx708.c +++ b/drivers/media/i2c/imx708.c @@ -792,8 +792,6 @@ static const char * const imx708_supply_ "VDDL", /* IF (1.8V) supply */ }; -#define IMX708_NUM_SUPPLIES ARRAY_SIZE(imx708_supply_name) - /* * Initialisation delay between XCLR low->high and the moment when the sensor * can start capture (i.e. can leave software standby), given by T7 in the @@ -815,7 +813,7 @@ struct imx708 { u32 xclk_freq; struct gpio_desc *reset_gpio; - struct regulator_bulk_data supplies[IMX708_NUM_SUPPLIES]; + struct regulator_bulk_data supplies[ARRAY_SIZE(imx708_supply_name)]; struct v4l2_ctrl_handler ctrl_handler; /* V4L2 Controls */ @@ -935,9 +933,10 @@ static int imx708_write_regs(struct imx7 { struct i2c_client *client = v4l2_get_subdevdata(&imx708->sd); unsigned int i; - int ret; for (i = 0; i < len; i++) { + int ret; + ret = imx708_write_reg(imx708, regs[i].address, 1, regs[i].val); if (ret) { dev_err_ratelimited(&client->dev, @@ -1025,8 +1024,6 @@ static int imx708_open(struct v4l2_subde static int imx708_set_exposure(struct imx708 *imx708, unsigned int val) { - int ret; - val = max(val, imx708->mode->exposure_lines_min); val -= val % imx708->mode->exposure_lines_step; @@ -1034,11 +1031,9 @@ static int imx708_set_exposure(struct im * In HDR mode this will set the longest exposure. The sensor * will automatically divide the medium and short ones by 4,16. */ - ret = imx708_write_reg(imx708, IMX708_REG_EXPOSURE, - IMX708_REG_VALUE_16BIT, - val >> imx708->long_exp_shift); - - return ret; + return imx708_write_reg(imx708, IMX708_REG_EXPOSURE, + IMX708_REG_VALUE_16BIT, + val >> imx708->long_exp_shift); } static void imx708_adjust_exposure_range(struct imx708 *imx708, @@ -1071,7 +1066,7 @@ static int imx708_set_analogue_gain(stru static int imx708_set_frame_length(struct imx708 *imx708, unsigned int val) { - int ret = 0; + int ret; imx708->long_exp_shift = 0; @@ -1091,8 +1086,8 @@ static int imx708_set_frame_length(struc static void imx708_set_framing_limits(struct imx708 *imx708) { - unsigned int hblank; const struct imx708_mode *mode = imx708->mode; + unsigned int hblank; __v4l2_ctrl_modify_range(imx708->pixel_rate, mode->pixel_rate, mode->pixel_rate, @@ -1599,7 +1594,7 @@ static int imx708_power_on(struct device struct imx708 *imx708 = to_imx708(sd); int ret; - ret = regulator_bulk_enable(IMX708_NUM_SUPPLIES, + ret = regulator_bulk_enable(ARRAY_SIZE(imx708_supply_name), imx708->supplies); if (ret) { dev_err(&client->dev, "%s: failed to enable regulators\n", @@ -1621,7 +1616,8 @@ static int imx708_power_on(struct device return 0; reg_off: - regulator_bulk_disable(IMX708_NUM_SUPPLIES, imx708->supplies); + regulator_bulk_disable(ARRAY_SIZE(imx708_supply_name), + imx708->supplies); return ret; } @@ -1632,7 +1628,8 @@ static int imx708_power_off(struct devic struct imx708 *imx708 = to_imx708(sd); gpiod_set_value_cansleep(imx708->reset_gpio, 0); - regulator_bulk_disable(IMX708_NUM_SUPPLIES, imx708->supplies); + regulator_bulk_disable(ARRAY_SIZE(imx708_supply_name), + imx708->supplies); clk_disable_unprepare(imx708->xclk); /* Force reprogramming of the common registers when powered up again. */ @@ -1679,11 +1676,11 @@ static int imx708_get_regulators(struct struct i2c_client *client = v4l2_get_subdevdata(&imx708->sd); unsigned int i; - for (i = 0; i < IMX708_NUM_SUPPLIES; i++) + for (i = 0; i < ARRAY_SIZE(imx708_supply_name); i++) imx708->supplies[i].supply = imx708_supply_name[i]; return devm_regulator_bulk_get(&client->dev, - IMX708_NUM_SUPPLIES, + ARRAY_SIZE(imx708_supply_name), imx708->supplies); } @@ -1956,23 +1953,19 @@ static int imx708_probe(struct i2c_clien /* Get system clock (xclk) */ imx708->xclk = devm_clk_get(dev, NULL); - if (IS_ERR(imx708->xclk)) { - dev_err(dev, "failed to get xclk\n"); - return PTR_ERR(imx708->xclk); - } + if (IS_ERR(imx708->xclk)) + return dev_err_probe(dev, PTR_ERR(imx708->xclk), + "failed to get xclk\n"); imx708->xclk_freq = clk_get_rate(imx708->xclk); - if (imx708->xclk_freq != IMX708_XCLK_FREQ) { - dev_err(dev, "xclk frequency not supported: %d Hz\n", - imx708->xclk_freq); - return -EINVAL; - } + if (imx708->xclk_freq != IMX708_XCLK_FREQ) + return dev_err_probe(dev, -EINVAL, + "xclk frequency not supported: %d Hz\n", + imx708->xclk_freq); ret = imx708_get_regulators(imx708); - if (ret) { - dev_err(dev, "failed to get regulators\n"); - return ret; - } + if (ret) + return dev_err_probe(dev, ret, "failed to get regulators\n"); /* Request optional enable pin */ imx708->reset_gpio = devm_gpiod_get_optional(dev, "reset", @@ -2001,7 +1994,7 @@ static int imx708_probe(struct i2c_clien /* This needs the pm runtime to be registered. */ ret = imx708_init_controls(imx708); if (ret) - goto error_power_off; + goto error_pm_runtime; /* Initialize subdev */ imx708->sd.internal_ops = &imx708_internal_ops; @@ -2033,9 +2026,11 @@ error_media_entity: error_handler_free: imx708_free_controls(imx708); -error_power_off: +error_pm_runtime: pm_runtime_disable(&client->dev); pm_runtime_set_suspended(&client->dev); + +error_power_off: imx708_power_off(&client->dev); return ret;