From 2b0229f67932e4b9e2f458bf286903582bd30740 Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Thu, 1 Aug 2024 09:35:12 +0200 Subject: [PATCH] net: dsa: mt7530: Add EN7581 support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Introduce support for the DSA built-in switch available on the EN7581 development board. EN7581 support is similar to MT7988 one except it requires to set MT7530_FORCE_MODE bit in MT753X_PMCR_P register for on cpu port. Tested-by: Benjamin Larsson Signed-off-by: Lorenzo Bianconi Reviewed-by: Arınç ÜNAL Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/dsa/mt7530-mmio.c | 1 + drivers/net/dsa/mt7530.c | 49 ++++++++++++++++++++++++++++++----- drivers/net/dsa/mt7530.h | 20 ++++++++++---- 3 files changed, 59 insertions(+), 11 deletions(-) --- a/drivers/net/dsa/mt7530-mmio.c +++ b/drivers/net/dsa/mt7530-mmio.c @@ -11,6 +11,7 @@ #include "mt7530.h" static const struct of_device_id mt7988_of_match[] = { + { .compatible = "airoha,en7581-switch", .data = &mt753x_table[ID_EN7581], }, { .compatible = "mediatek,mt7988-switch", .data = &mt753x_table[ID_MT7988], }, { /* sentinel */ }, }; --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -1152,7 +1152,8 @@ mt753x_cpu_port_enable(struct dsa_switch * the MT7988 SoC. Trapped frames will be forwarded to the CPU port that * is affine to the inbound user port. */ - if (priv->id == ID_MT7531 || priv->id == ID_MT7988) + if (priv->id == ID_MT7531 || priv->id == ID_MT7988 || + priv->id == ID_EN7581) mt7530_set(priv, MT7531_CFC, MT7531_CPU_PMAP(BIT(port))); /* CPU port gets connected to all user ports of @@ -2207,7 +2208,7 @@ mt7530_setup_irq(struct mt7530_priv *pri return priv->irq ? : -EINVAL; } - if (priv->id == ID_MT7988) + if (priv->id == ID_MT7988 || priv->id == ID_EN7581) priv->irq_domain = irq_domain_add_linear(np, MT7530_NUM_PHYS, &mt7988_irq_domain_ops, priv); @@ -2438,8 +2439,10 @@ mt7530_setup(struct dsa_switch *ds) /* Clear link settings and enable force mode to force link down * on all ports until they're enabled later. */ - mt7530_rmw(priv, MT753X_PMCR_P(i), PMCR_LINK_SETTINGS_MASK | - MT7530_FORCE_MODE, MT7530_FORCE_MODE); + mt7530_rmw(priv, MT753X_PMCR_P(i), + PMCR_LINK_SETTINGS_MASK | + MT753X_FORCE_MODE(priv->id), + MT753X_FORCE_MODE(priv->id)); /* Disable forwarding by default on all ports */ mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK, @@ -2550,8 +2553,10 @@ mt7531_setup_common(struct dsa_switch *d /* Clear link settings and enable force mode to force link down * on all ports until they're enabled later. */ - mt7530_rmw(priv, MT753X_PMCR_P(i), PMCR_LINK_SETTINGS_MASK | - MT7531_FORCE_MODE_MASK, MT7531_FORCE_MODE_MASK); + mt7530_rmw(priv, MT753X_PMCR_P(i), + PMCR_LINK_SETTINGS_MASK | + MT753X_FORCE_MODE(priv->id), + MT753X_FORCE_MODE(priv->id)); /* Disable forwarding by default on all ports */ mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK, @@ -2783,6 +2788,28 @@ static void mt7988_mac_port_get_caps(str } } +static void en7581_mac_port_get_caps(struct dsa_switch *ds, int port, + struct phylink_config *config) +{ + switch (port) { + /* Ports which are connected to switch PHYs. There is no MII pinout. */ + case 0 ... 4: + __set_bit(PHY_INTERFACE_MODE_INTERNAL, + config->supported_interfaces); + + config->mac_capabilities |= MAC_10 | MAC_100 | MAC_1000FD; + break; + + /* Port 6 is connected to SoC's XGMII MAC. There is no MII pinout. */ + case 6: + __set_bit(PHY_INTERFACE_MODE_INTERNAL, + config->supported_interfaces); + + config->mac_capabilities |= MAC_10000FD; + break; + } +} + static void mt7530_mac_config(struct dsa_switch *ds, int port, unsigned int mode, phy_interface_t interface) @@ -3220,6 +3247,16 @@ const struct mt753x_info mt753x_table[] .phy_write_c45 = mt7531_ind_c45_phy_write, .mac_port_get_caps = mt7988_mac_port_get_caps, }, + [ID_EN7581] = { + .id = ID_EN7581, + .pcs_ops = &mt7530_pcs_ops, + .sw_setup = mt7988_setup, + .phy_read_c22 = mt7531_ind_c22_phy_read, + .phy_write_c22 = mt7531_ind_c22_phy_write, + .phy_read_c45 = mt7531_ind_c45_phy_read, + .phy_write_c45 = mt7531_ind_c45_phy_write, + .mac_port_get_caps = en7581_mac_port_get_caps, + }, }; EXPORT_SYMBOL_GPL(mt753x_table); --- a/drivers/net/dsa/mt7530.h +++ b/drivers/net/dsa/mt7530.h @@ -19,6 +19,7 @@ enum mt753x_id { ID_MT7621 = 1, ID_MT7531 = 2, ID_MT7988 = 3, + ID_EN7581 = 4, }; #define NUM_TRGMII_CTRL 5 @@ -64,25 +65,30 @@ enum mt753x_id { #define MT7531_CPU_PMAP(x) FIELD_PREP(MT7531_CPU_PMAP_MASK, x) #define MT753X_MIRROR_REG(id) ((id == ID_MT7531 || \ - id == ID_MT7988) ? \ + id == ID_MT7988 || \ + id == ID_EN7581) ? \ MT7531_CFC : MT753X_MFC) #define MT753X_MIRROR_EN(id) ((id == ID_MT7531 || \ - id == ID_MT7988) ? \ + id == ID_MT7988 || \ + id == ID_EN7581) ? \ MT7531_MIRROR_EN : MT7530_MIRROR_EN) #define MT753X_MIRROR_PORT_MASK(id) ((id == ID_MT7531 || \ - id == ID_MT7988) ? \ + id == ID_MT7988 || \ + id == ID_EN7581) ? \ MT7531_MIRROR_PORT_MASK : \ MT7530_MIRROR_PORT_MASK) #define MT753X_MIRROR_PORT_GET(id, val) ((id == ID_MT7531 || \ - id == ID_MT7988) ? \ + id == ID_MT7988 || \ + id == ID_EN7581) ? \ MT7531_MIRROR_PORT_GET(val) : \ MT7530_MIRROR_PORT_GET(val)) #define MT753X_MIRROR_PORT_SET(id, val) ((id == ID_MT7531 || \ - id == ID_MT7988) ? \ + id == ID_MT7988 || \ + id == ID_EN7581) ? \ MT7531_MIRROR_PORT_SET(val) : \ MT7530_MIRROR_PORT_SET(val)) @@ -355,6 +361,10 @@ enum mt7530_vlan_port_acc_frm { MT7531_FORCE_MODE_TX_FC | \ MT7531_FORCE_MODE_EEE100 | \ MT7531_FORCE_MODE_EEE1G) +#define MT753X_FORCE_MODE(id) ((id == ID_MT7531 || \ + id == ID_MT7988) ? \ + MT7531_FORCE_MODE_MASK : \ + MT7530_FORCE_MODE) #define PMCR_LINK_SETTINGS_MASK (PMCR_MAC_TX_EN | PMCR_MAC_RX_EN | \ PMCR_FORCE_EEE1G | \ PMCR_FORCE_EEE100 | \