/dts-v1/;
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include "sf19a2890.dtsi"

/ {
	model = "Siflower SF19A2890 Evaluation Board";
	compatible = "siflower,sf19a2890-evb", "siflower,sf19a2890";

	aliases {
		led-boot = &led_wlan;
		led-failsafe = &led_wlan;
		led-running = &led_wlan;
		led-upgrade = &led_wlan;
	};

	chosen {
		stdout-path = "serial0:115200n8";
	};

	memory@0 {
		device_type = "memory";
		reg = <0x0 0x8000000>;
	};

	leds {
		compatible = "gpio-leds";

		led_wlan: wlan {
			function = LED_FUNCTION_WLAN;
			color = <LED_COLOR_ID_RED>;
			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
		};
	};

	keys {
		compatible = "gpio-keys";

		reset {
			label = "reset";
			gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RESTART>;
		};
	};

	rtl8367rb {
		compatible = "realtek,rtl8367b";
		realtek,extif = <6 0 0 1 1 1 1 1 1 2>;
		mii-bus = <&mdio>;
		phy-id = <0>;
	};
};

&gmac {
	status = "okay";
	phy-mode = "rgmii-id";
	snps,ps-speed = <1000>;
	nvmem-cells = <&macaddr_factory_0>, <&rgmii_delay_factory_b2>;
	nvmem-cell-names = "mac-address", "rgmii-delay";
	fixed-link {
		speed = <1000>;
		full-duplex;
		pause;
	};
};

&wlan_rf {
	status = "okay";
};

&uart0 {
	status = "okay";
};

&usb {
	status = "okay";
};

&usb_phy {
	status = "okay";
};

&spi {
	status = "okay";
	flash@0 {
		compatible = "jedec,spi-nor";
		reg = <0>;
		spi-max-frequency = <30000000>;

		#address-cells = <1>;
		#size-cells = <1>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "spl-loader";
				reg = <0x0 0x20000>; /* 128k */
				read-only;
			};

			partition@20000 {
				label = "u-boot";
				reg = <0x20000 0x60000>; /* 384k */
			};

			partition@80000 {
				label = "u-boot-env";
				reg = <0x80000 0x10000>; /* 64k */
			};

			factory:partition@90000 {
				label = "factory";
				reg = <0x90000 0x10000>; /* 64k */

				nvmem-layout {
					compatible = "fixed-layout";
					#address-cells = <1>;
					#size-cells = <1>;

					macaddr_factory_0: macaddr@0 {
						reg = <0x0 0x6>;
					};

					rgmii_delay_factory_b2: rgmii-delay@b2 {
						reg = <0xb2 0x4>;
					};
				};
			};

			partition@a0000 {
				compatible = "denx,uimage";
				label = "firmware";
				reg = <0xa0000 0x0>; /* 640k- */
			};
		};
	};
};