From e19de30d20809af3221ef8a2648b8a8a52e02d90 Mon Sep 17 00:00:00 2001 From: Daniel Golle Date: Wed, 21 Sep 2022 01:23:14 +0100 Subject: [PATCH 1/1] net: dsa: mt7530: add support for in-band link status Read link status from SGMII PCS for in-band managed 2500Base-X and 1000Base-X connection on a MAC port of the MT7531. This is needed to get the SFP cage working which is connected to SGMII interface of port 5 of the MT7531 switch IC on the Bananapi BPi-R3 board. While at it also handle an_complete for both the autoneg and the non-autoneg codepath. Signed-off-by: Daniel Golle Signed-off-by: David S. Miller --- drivers/net/dsa/mt7530.c | 50 +++++++++++++++++++++++++++++----------- drivers/net/dsa/mt7530.h | 1 + 2 files changed, 38 insertions(+), 13 deletions(-) --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -2791,9 +2791,6 @@ mt7531_mac_config(struct dsa_switch *ds, case PHY_INTERFACE_MODE_NA: case PHY_INTERFACE_MODE_1000BASEX: case PHY_INTERFACE_MODE_2500BASEX: - if (phylink_autoneg_inband(mode)) - return -EINVAL; - return mt7531_sgmii_setup_mode_force(priv, port, interface); default: return -EINVAL; @@ -2869,13 +2866,6 @@ unsupported: return; } - if (phylink_autoneg_inband(mode) && - state->interface != PHY_INTERFACE_MODE_SGMII) { - dev_err(ds->dev, "%s: in-band negotiation unsupported\n", - __func__); - return; - } - mcr_cur = mt7530_read(priv, MT7530_PMCR_P(port)); mcr_new = mcr_cur; mcr_new &= ~PMCR_LINK_SETTINGS_MASK; @@ -3012,6 +3002,9 @@ static void mt753x_phylink_get_caps(stru config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | MAC_10 | MAC_100 | MAC_1000FD; + if ((priv->id == ID_MT7531) && mt753x_is_mac_port(port)) + config->mac_capabilities |= MAC_2500FD; + /* This driver does not make use of the speed, duplex, pause or the * advertisement in its mac_config, so it is safe to mark this driver * as non-legacy. @@ -3077,6 +3070,7 @@ mt7531_sgmii_pcs_get_state_an(struct mt7 status = mt7530_read(priv, MT7531_PCS_CONTROL_1(port)); state->link = !!(status & MT7531_SGMII_LINK_STATUS); + state->an_complete = !!(status & MT7531_SGMII_AN_COMPLETE); if (state->interface == PHY_INTERFACE_MODE_SGMII && (status & MT7531_SGMII_AN_ENABLE)) { val = mt7530_read(priv, MT7531_PCS_SPEED_ABILITY(port)); @@ -3107,16 +3101,44 @@ mt7531_sgmii_pcs_get_state_an(struct mt7 return 0; } +static void +mt7531_sgmii_pcs_get_state_inband(struct mt7530_priv *priv, int port, + struct phylink_link_state *state) +{ + unsigned int val; + + val = mt7530_read(priv, MT7531_PCS_CONTROL_1(port)); + state->link = !!(val & MT7531_SGMII_LINK_STATUS); + if (!state->link) + return; + + state->an_complete = state->link; + + if (state->interface == PHY_INTERFACE_MODE_2500BASEX) + state->speed = SPEED_2500; + else + state->speed = SPEED_1000; + + state->duplex = DUPLEX_FULL; + state->pause = MLO_PAUSE_NONE; +} + static void mt7531_pcs_get_state(struct phylink_pcs *pcs, struct phylink_link_state *state) { struct mt7530_priv *priv = pcs_to_mt753x_pcs(pcs)->priv; int port = pcs_to_mt753x_pcs(pcs)->port; - if (state->interface == PHY_INTERFACE_MODE_SGMII) + if (state->interface == PHY_INTERFACE_MODE_SGMII) { mt7531_sgmii_pcs_get_state_an(priv, port, state); - else - state->link = false; + return; + } else if ((state->interface == PHY_INTERFACE_MODE_1000BASEX) || + (state->interface == PHY_INTERFACE_MODE_2500BASEX)) { + mt7531_sgmii_pcs_get_state_inband(priv, port, state); + return; + } + + state->link = false; } static int mt753x_pcs_config(struct phylink_pcs *pcs, unsigned int mode, @@ -3157,6 +3179,8 @@ mt753x_setup(struct dsa_switch *ds) priv->pcs[i].pcs.ops = priv->info->pcs_ops; priv->pcs[i].priv = priv; priv->pcs[i].port = i; + if (mt753x_is_mac_port(i)) + priv->pcs[i].pcs.poll = 1; } ret = priv->info->sw_setup(ds); --- a/drivers/net/dsa/mt7530.h +++ b/drivers/net/dsa/mt7530.h @@ -400,6 +400,7 @@ enum mt7530_vlan_port_acc_frm { #define MT7531_SGMII_LINK_STATUS BIT(18) #define MT7531_SGMII_AN_ENABLE BIT(12) #define MT7531_SGMII_AN_RESTART BIT(9) +#define MT7531_SGMII_AN_COMPLETE BIT(21) /* Register for SGMII PCS_SPPED_ABILITY */ #define MT7531_PCS_SPEED_ABILITY(p) MT7531_SGMII_REG(p, 0x08)