// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include "qca9558_tplink_archer-c.dtsi" / { compatible = "tplink,archer-c7-v2", "qca,qca9558"; model = "TP-Link Archer C7 v2"; aliases { label-mac-device = ð1; }; }; &keys { rfkill { label = "rfkill"; gpios = <&gpio 23 GPIO_ACTIVE_LOW>; linux,code = ; linux,input-type = ; debounce-interval = <1000>; }; }; &leds { wlan5g { label = "green:wlan5g"; gpios = <&gpio 17 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy0tpt"; }; }; &mtdparts { uboot: partition@0 { label = "u-boot"; reg = <0x000000 0x020000>; read-only; }; partition@20000 { label = "firmware"; reg = <0x020000 0xfd0000>; compatible = "tplink,firmware"; }; art: partition@ff0000 { label = "art"; reg = <0xff0000 0x010000>; read-only; compatible = "nvmem-cells"; #address-cells = <1>; #size-cells = <1>; calibration_art_1000: calibration@1000 { reg = <0x1000 0x440>; }; calibration_art_5000: calibration@5000 { reg = <0x5000 0x844>; }; }; }; ð0 { nvmem-cells = <&macaddr_uboot_1fc00>; nvmem-cell-names = "mac-address"; mac-address-increment = <1>; }; ð1 { nvmem-cells = <&macaddr_uboot_1fc00>; nvmem-cell-names = "mac-address"; }; &pcie1 { status = "okay"; wifi@0,0 { compatible = "qcom,ath10k"; reg = <0 0 0 0 0>; mac-address-increment = <(-1)>; nvmem-cells = <&macaddr_uboot_1fc00>, <&calibration_art_5000>; nvmem-cell-names = "mac-address", "calibration"; }; }; &wmac { nvmem-cells = <&macaddr_uboot_1fc00>, <&calibration_art_1000>; nvmem-cell-names = "mac-address", "calibration"; }; &uboot { compatible = "nvmem-cells"; #address-cells = <1>; #size-cells = <1>; macaddr_uboot_1fc00: macaddr@1fc00 { reg = <0x1fc00 0x6>; }; };