From f98de63c37936cff4a1e10024273ccbf018ba36a Mon Sep 17 00:00:00 2001 From: Luke Wren Date: Sat, 5 Sep 2015 01:16:10 +0100 Subject: [PATCH 051/782] Add SMI NAND driver Signed-off-by: Luke Wren --- .../bindings/mtd/brcm,bcm2835-smi-nand.txt | 42 +++ drivers/mtd/nand/raw/Kconfig | 7 + drivers/mtd/nand/raw/Makefile | 1 + drivers/mtd/nand/raw/bcm2835_smi_nand.c | 258 ++++++++++++++++++ 4 files changed, 308 insertions(+) create mode 100644 Documentation/devicetree/bindings/mtd/brcm,bcm2835-smi-nand.txt create mode 100644 drivers/mtd/nand/raw/bcm2835_smi_nand.c --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/brcm,bcm2835-smi-nand.txt @@ -0,0 +1,42 @@ +* BCM2835 SMI NAND flash + +This driver is a shim between the BCM2835 SMI driver (SMI is a peripheral for +talking to parallel register interfaces) and Linux's MTD layer. + +Required properties: +- compatible: "brcm,bcm2835-smi-nand" +- status: "okay" + +Optional properties: +- partition@n, where n is an integer from a consecutive sequence starting at 0 + - Difficult to store partition table on NAND device - normally put it + in the source code, kernel bootparams, or device tree (the best way!) + - Sub-properties: + - label: the partition name, as shown by mtdinfo /dev/mtd* + - reg: the size and offset of this partition. + - (optional) read-only: an empty property flagging as read only + +Example: + +nand: flash@0 { + compatible = "brcm,bcm2835-smi-nand"; + status = "okay"; + + partition@0 { + label = "stage2"; + // 128k + reg = <0 0x20000>; + read-only; + }; + partition@1 { + label = "firmware"; + // 16M + reg = <0x20000 0x1000000>; + read-only; + }; + partition@2 { + label = "root"; + // 2G + reg = <0x1020000 0x80000000>; + }; +}; \ No newline at end of file --- a/drivers/mtd/nand/raw/Kconfig +++ b/drivers/mtd/nand/raw/Kconfig @@ -40,6 +40,13 @@ config MTD_SM_COMMON tristate default n +config MTD_NAND_BCM2835_SMI + tristate "Use Broadcom's Secondary Memory Interface as a NAND controller (BCM283x)" + depends on BCM2835_SMI + default m + help + Uses the BCM2835's SMI peripheral as a NAND controller. + config MTD_NAND_DENALI tristate --- a/drivers/mtd/nand/raw/Makefile +++ b/drivers/mtd/nand/raw/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_MTD_NAND_DENALI) += denali obj-$(CONFIG_MTD_NAND_DENALI_PCI) += denali_pci.o obj-$(CONFIG_MTD_NAND_DENALI_DT) += denali_dt.o obj-$(CONFIG_MTD_NAND_AU1550) += au1550nd.o +obj-$(CONFIG_MTD_NAND_BCM2835_SMI) += bcm2835_smi_nand.o obj-$(CONFIG_MTD_NAND_S3C2410) += s3c2410.o obj-$(CONFIG_MTD_NAND_TANGO) += tango_nand.o obj-$(CONFIG_MTD_NAND_DAVINCI) += davinci_nand.o --- /dev/null +++ b/drivers/mtd/nand/raw/bcm2835_smi_nand.c @@ -0,0 +1,258 @@ +/** + * NAND flash driver for Broadcom Secondary Memory Interface + * + * Written by Luke Wren + * Copyright (c) 2015, Raspberry Pi (Trading) Ltd. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The names of the above-listed copyright holders may not be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2, as published by the Free + * Software Foundation. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include + +#define DEVICE_NAME "bcm2835-smi-nand" +#define DRIVER_NAME "smi-nand-bcm2835" + +struct bcm2835_smi_nand_host { + struct bcm2835_smi_instance *smi_inst; + struct nand_chip nand_chip; + struct mtd_info mtd; + struct device *dev; +}; + +/**************************************************************************** +* +* NAND functionality implementation +* +****************************************************************************/ + +#define SMI_NAND_CLE_PIN 0x01 +#define SMI_NAND_ALE_PIN 0x02 + +static inline void bcm2835_smi_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, + unsigned int ctrl) +{ + uint32_t cmd32 = cmd; + uint32_t addr = ~(SMI_NAND_CLE_PIN | SMI_NAND_ALE_PIN); + struct bcm2835_smi_nand_host *host = dev_get_drvdata(mtd->dev.parent); + struct bcm2835_smi_instance *inst = host->smi_inst; + + if (ctrl & NAND_CLE) + addr |= SMI_NAND_CLE_PIN; + if (ctrl & NAND_ALE) + addr |= SMI_NAND_ALE_PIN; + /* Lower ALL the CS pins! */ + if (ctrl & NAND_NCE) + addr &= (SMI_NAND_CLE_PIN | SMI_NAND_ALE_PIN); + + bcm2835_smi_set_address(inst, addr); + + if (cmd != NAND_CMD_NONE) + bcm2835_smi_write_buf(inst, &cmd32, 1); +} + +static inline uint8_t bcm2835_smi_nand_read_byte(struct mtd_info *mtd) +{ + uint8_t byte; + struct bcm2835_smi_nand_host *host = dev_get_drvdata(mtd->dev.parent); + struct bcm2835_smi_instance *inst = host->smi_inst; + + bcm2835_smi_read_buf(inst, &byte, 1); + return byte; +} + +static inline void bcm2835_smi_nand_write_byte(struct mtd_info *mtd, + uint8_t byte) +{ + struct bcm2835_smi_nand_host *host = dev_get_drvdata(mtd->dev.parent); + struct bcm2835_smi_instance *inst = host->smi_inst; + + bcm2835_smi_write_buf(inst, &byte, 1); +} + +static inline void bcm2835_smi_nand_write_buf(struct mtd_info *mtd, + const uint8_t *buf, int len) +{ + struct bcm2835_smi_nand_host *host = dev_get_drvdata(mtd->dev.parent); + struct bcm2835_smi_instance *inst = host->smi_inst; + + bcm2835_smi_write_buf(inst, buf, len); +} + +static inline void bcm2835_smi_nand_read_buf(struct mtd_info *mtd, + uint8_t *buf, int len) +{ + struct bcm2835_smi_nand_host *host = dev_get_drvdata(mtd->dev.parent); + struct bcm2835_smi_instance *inst = host->smi_inst; + + bcm2835_smi_read_buf(inst, buf, len); +} + +/**************************************************************************** +* +* Probe and remove functions +* +***************************************************************************/ + +static int bcm2835_smi_nand_probe(struct platform_device *pdev) +{ + struct bcm2835_smi_nand_host *host; + struct nand_chip *this; + struct mtd_info *mtd; + struct device *dev = &pdev->dev; + struct device_node *node = dev->of_node, *smi_node; + struct mtd_part_parser_data ppdata; + struct smi_settings *smi_settings; + struct bcm2835_smi_instance *smi_inst; + int ret = -ENXIO; + + if (!node) { + dev_err(dev, "No device tree node supplied!"); + return -EINVAL; + } + + smi_node = of_parse_phandle(node, "smi_handle", 0); + + /* Request use of SMI peripheral: */ + smi_inst = bcm2835_smi_get(smi_node); + + if (!smi_inst) { + dev_err(dev, "Could not register with SMI."); + return -EPROBE_DEFER; + } + + /* Set SMI timing and bus width */ + + smi_settings = bcm2835_smi_get_settings_from_regs(smi_inst); + + smi_settings->data_width = SMI_WIDTH_8BIT; + smi_settings->read_setup_time = 2; + smi_settings->read_hold_time = 1; + smi_settings->read_pace_time = 1; + smi_settings->read_strobe_time = 3; + + smi_settings->write_setup_time = 2; + smi_settings->write_hold_time = 1; + smi_settings->write_pace_time = 1; + smi_settings->write_strobe_time = 3; + + bcm2835_smi_set_regs_from_settings(smi_inst); + + host = devm_kzalloc(dev, sizeof(struct bcm2835_smi_nand_host), + GFP_KERNEL); + if (!host) + return -ENOMEM; + + host->dev = dev; + host->smi_inst = smi_inst; + + platform_set_drvdata(pdev, host); + + /* Link the structures together */ + + this = &host->nand_chip; + mtd = &host->mtd; + mtd->priv = this; + mtd->owner = THIS_MODULE; + mtd->dev.parent = dev; + mtd->name = DRIVER_NAME; + + /* 20 us command delay time... */ + this->chip_delay = 20; + + this->priv = host; + this->cmd_ctrl = bcm2835_smi_nand_cmd_ctrl; + this->read_byte = bcm2835_smi_nand_read_byte; + this->write_byte = bcm2835_smi_nand_write_byte; + this->write_buf = bcm2835_smi_nand_write_buf; + this->read_buf = bcm2835_smi_nand_read_buf; + + this->ecc.mode = NAND_ECC_SOFT; + + /* Should never be accessed directly: */ + + this->IO_ADDR_R = (void *)0xdeadbeef; + this->IO_ADDR_W = (void *)0xdeadbeef; + + /* Scan to find the device and get the page size */ + + if (nand_scan(mtd, 1)) + return -ENXIO; + + nand_release(mtd); + return -EINVAL; +} + +static int bcm2835_smi_nand_remove(struct platform_device *pdev) +{ + struct bcm2835_smi_nand_host *host = platform_get_drvdata(pdev); + + nand_release(&host->mtd); + + return 0; +} + +/**************************************************************************** +* +* Register the driver with device tree +* +***************************************************************************/ + +static const struct of_device_id bcm2835_smi_nand_of_match[] = { + {.compatible = "brcm,bcm2835-smi-nand",}, + { /* sentinel */ } +}; + +MODULE_DEVICE_TABLE(of, bcm2835_smi_nand_of_match); + +static struct platform_driver bcm2835_smi_nand_driver = { + .probe = bcm2835_smi_nand_probe, + .remove = bcm2835_smi_nand_remove, + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + .of_match_table = bcm2835_smi_nand_of_match, + }, +}; + +module_platform_driver(bcm2835_smi_nand_driver); + +MODULE_ALIAS("platform:smi-nand-bcm2835"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION + ("Driver for NAND chips using Broadcom Secondary Memory Interface"); +MODULE_AUTHOR("Luke Wren ");