// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include "mt7621.dtsi" #include #include #include / { compatible = "asus,rt-ax54", "mediatek,mt7621-soc"; model = "ASUS RT-AX54"; aliases { led-boot = &led_power; led-failsafe = &led_power; led-running = &led_power; led-upgrade = &led_power; label-mac-device = &gmac0; }; chosen { bootargs = "console=ttyS0,115200"; bootargs-override = "console=ttyS0,115200"; }; leds { compatible = "gpio-leds"; led_power: power { color = ; function = LED_FUNCTION_POWER; gpios = <&gpio 13 GPIO_ACTIVE_LOW>; }; }; keys { compatible = "gpio-keys"; key-restart { label = "reset"; gpios = <&gpio 16 GPIO_ACTIVE_LOW>; linux,code = ; }; key-wps { label = "wps"; gpios = <&gpio 15 GPIO_ACTIVE_LOW>; linux,code = ; }; }; }; &nand { status = "okay"; mediatek,nmbm; mediatek,bmt-max-ratio = <1>; mediatek,bmt-max-reserved-blocks = <64>; mediatek,bmt-remap-range = <0x000000 0x7e0000>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x0 0x80000>; read-only; }; /* * u-boot gets split here while keeping u-boot read-only, * which allows safe usage of fw_setenv */ partition@80000 { label = "u-boot-env"; reg = <0x80000 0x60000>; }; partition@e0000 { label = "nvram"; reg = <0xe0000 0x100000>; read-only; }; partition@1e0000 { label = "factory"; reg = <0x1e0000 0x100000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; eeprom_factory_0: eeprom@0 { reg = <0x0 0xe00>; }; macaddr_factory_4: macaddr@4 { reg = <0x4 0x6>; }; precal_factory_e10: precal@e10 { reg = <0xe10 0x19c10>; }; }; }; partition@2e0000 { label = "factory2"; reg = <0x2e0000 0x100000>; read-only; }; partition@3e0000 { label = "kernel"; reg = <0x3e0000 0x400000>; }; partition@7e0000 { label = "ubi"; reg = <0x7e0000 0x7020000>; }; /* Last 8M are reserved for NMBM management (bad blocks) */ }; }; &pcie { status = "okay"; }; &pcie1 { wifi@0,0 { compatible = "mediatek,mt76"; reg = <0x0000 0 0 0 0>; nvmem-cells = <&eeprom_factory_0>, <&precal_factory_e10>; nvmem-cell-names = "eeprom", "precal"; mediatek,disable-radar-background; }; }; &gmac0 { nvmem-cells = <&macaddr_factory_4>; nvmem-cell-names = "mac-address"; }; &gmac1 { status = "okay"; label = "wan"; phy-handle = <ðphy4>; nvmem-cells = <&macaddr_factory_4>; nvmem-cell-names = "mac-address"; }; &mdio { ethphy4: ethernet-phy@4 { reg = <4>; }; }; &switch0 { ports { port@0 { status = "okay"; label = "lan4"; }; port@1 { status = "okay"; label = "lan3"; }; port@2 { status = "okay"; label = "lan2"; }; port@3 { status = "okay"; label = "lan1"; }; }; }; &state_default { gpio { groups = "i2c", "uart2", "uart3", "jtag", "wdt"; function = "gpio"; }; };