// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include "mt7621_ubnt_unifi.dtsi" / { compatible = "ubnt,unifi-6-lite", "mediatek,mt7621-soc"; model = "Ubiquiti UniFi 6 Lite"; chosen { bootargs-override = "console=ttyS0,115200"; }; }; &spi0 { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <50000000>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x0 0x60000>; read-only; }; partition@60000 { label = "u-boot-env"; reg = <0x60000 0x10000>; read-only; }; factory: partition@70000 { label = "factory"; reg = <0x70000 0x40000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; eeprom_factory_0: eeprom@0 { reg = <0x0 0x400>; }; eeprom_factory_20000: eeprom@20000 { reg = <0x20000 0xe00>; }; precal_factory_20e10: precal@20e10 { reg = <0x20e10 0x19c10>; }; }; }; eeprom: partition@b0000 { label = "eeprom"; reg = <0xb0000 0x10000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; macaddr_eeprom_0: macaddr@0 { reg = <0x0 0x6>; }; macaddr_eeprom_6: macaddr@6 { compatible = "mac-base"; reg = <0x6 0x6>; #nvmem-cell-cells = <1>; }; }; }; partition@c0000 { label = "bs"; reg = <0xc0000 0x10000>; }; partition@d0000 { label = "cfg"; reg = <0xd0000 0x100000>; read-only; }; partition@1d0000 { compatible = "denx,fit"; label = "firmware"; reg = <0x1d0000 0xf10000>; }; partition@10e0000 { label = "kernel1"; reg = <0x10e0000 0xf10000>; }; }; }; }; &gmac0 { nvmem-cells = <&macaddr_eeprom_0>; nvmem-cell-names = "mac-address"; }; &wlan_2g { nvmem-cells = <&eeprom_factory_0>, <&macaddr_eeprom_0>; nvmem-cell-names = "eeprom", "mac-address"; }; &wlan_5g { compatible = "mediatek,mt76"; /* This is a workaround. * * Ubiquiti uses a +2 offset in the first octet relative * to the 2.4 GHz WMAC. Other octets are identical. * * The vendor firmware increases the last octet by 2 for each * VAP. * * This is in conflict on how mac80211 addresses subsequent VAPs. * mac80211 increases the first octet by two for each VAP, leading * to conflicting MAC addresses for subsequent interfaces. */ nvmem-cells = <&macaddr_eeprom_6 1>, <&eeprom_factory_20000>, <&precal_factory_20e10>; nvmem-cell-names = "mac-address", "eeprom", "precal"; ieee80211-freq-limit = <5000000 6000000>; mediatek,disable-radar-background; };