#include "mt7621.dtsi" #include #include / { compatible = "d-team,pbr-m1", "mediatek,mt7621-soc"; model = "PBR-M1"; aliases { led-boot = &led_sys; led-failsafe = &led_sys; led-running = &led_sys; led-upgrade = &led_sys; }; chosen { bootargs = "console=ttyS0,115200"; }; leds { compatible = "gpio-leds"; power { label = "blue:power"; gpios = <&gpio 31 GPIO_ACTIVE_LOW>; default-state = "on"; }; led_sys: sys { label = "blue:sys"; gpios = <&gpio 32 GPIO_ACTIVE_LOW>; }; internet { label = "blue:internet"; gpios = <&gpio 29 GPIO_ACTIVE_LOW>; }; wlan2g { label = "blue:wlan2g"; gpios = <&gpio 33 GPIO_ACTIVE_LOW>; }; wlan5g { label = "blue:wlan5g"; gpios = <&gpio 28 GPIO_ACTIVE_LOW>; }; }; keys { compatible = "gpio-keys"; reset { label = "reset"; gpios = <&gpio 18 GPIO_ACTIVE_LOW>; linux,code = ; }; }; gpio_export { compatible = "gpio-export"; #size-cells = <0>; power_usb2 { gpio-export,name = "power_usb2"; gpio-export,output = <1>; gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; }; power_usb3 { gpio-export,name = "power_usb3"; gpio-export,output = <1>; gpios = <&gpio 25 GPIO_ACTIVE_HIGH>; }; power_sata { gpio-export,name = "power_sata"; gpio-export,output = <1>; gpios = <&gpio 27 GPIO_ACTIVE_HIGH>; }; }; beeper: beeper { compatible = "gpio-beeper"; gpios = <&gpio 26 GPIO_ACTIVE_LOW>; }; }; &i2c { status = "okay"; rtc@51 { status = "okay"; compatible = "nxp,pcf8563"; reg = <0x51>; }; }; &sdhci { status = "okay"; }; &spi0 { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <50000000>; m25p,fast-read; broken-flash-reset; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x0 0x30000>; read-only; }; partition@30000 { label = "u-boot-env"; reg = <0x30000 0x10000>; read-only; }; factory: partition@40000 { compatible = "nvmem-cells"; label = "factory"; reg = <0x40000 0x10000>; #address-cells = <1>; #size-cells = <1>; read-only; eeprom_factory_0: eeprom@0 { reg = <0x0 0x400>; }; eeprom_factory_8000: eeprom@8000 { reg = <0x8000 0x200>; }; macaddr_factory_e000: macaddr@e000 { reg = <0xe000 0x6>; }; macaddr_factory_e006: macaddr@e006 { reg = <0xe006 0x6>; }; }; partition@50000 { compatible = "denx,uimage"; label = "firmware"; reg = <0x50000 0x1fb0000>; }; }; }; }; &pinctrl { uart3_gpio: uart3-gpio { uart3 { groups = "uart3"; function = "gpio"; }; }; }; &pcie { status = "okay"; pinctrl-0 = <&pcie_pins>, <&uart3_gpio>; reset-gpios = <&gpio 19 GPIO_ACTIVE_LOW>, <&gpio 7 GPIO_ACTIVE_LOW>; }; &pcie0 { mt76@0,0 { reg = <0x0000 0 0 0 0>; nvmem-cells = <&eeprom_factory_8000>; nvmem-cell-names = "eeprom"; ieee80211-freq-limit = <5000000 6000000>; }; }; &pcie1 { mt76@0,0 { reg = <0x0000 0 0 0 0>; nvmem-cells = <&eeprom_factory_0>; nvmem-cell-names = "eeprom"; }; }; ðernet { pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>; }; &gmac0 { nvmem-cells = <&macaddr_factory_e000>; nvmem-cell-names = "mac-address"; }; &switch0 { ports { port@0 { status = "okay"; label = "lan1"; }; port@1 { status = "okay"; label = "lan2"; }; port@2 { status = "okay"; label = "lan3"; }; port@3 { status = "okay"; label = "lan4"; }; port@4 { status = "okay"; label = "wan"; nvmem-cells = <&macaddr_factory_e006>; nvmem-cell-names = "mac-address"; }; }; }; &state_default { gpio { groups = "wdt", "rgmii2", "jtag"; function = "gpio"; }; };