#include "mt7621.dtsi" #include #include / { compatible = "netis,wf2881", "mediatek,mt7621-soc"; model = "NETIS WF2881"; aliases { led-boot = &led_wps; led-failsafe = &led_wps; led-running = &led_wps; led-upgrade = &led_wps; label-mac-device = &gmac0; }; leds { compatible = "gpio-leds"; usb { label = "green:usb"; gpios = <&gpio 6 GPIO_ACTIVE_LOW>; trigger-sources = <&xhci_ehci_port1>, <&ehci_port2>; linux,default-trigger = "usbport"; }; led_wps: wps { label = "green:wps"; gpios = <&gpio 0 GPIO_ACTIVE_LOW>; }; }; keys { compatible = "gpio-keys"; reset { label = "reset"; gpios = <&gpio 12 GPIO_ACTIVE_LOW>; linux,code = ; }; }; }; &nand { status = "okay"; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x0 0x80000>; read-only; }; partition@80000 { label = "config"; reg = <0x80000 0x80000>; read-only; }; factory: partition@100000 { compatible = "nvmem-cells"; label = "factory"; reg = <0x100000 0x40000>; #address-cells = <1>; #size-cells = <1>; read-only; eeprom_factory_0: eeprom@0 { reg = <0x0 0x200>; }; eeprom_factory_8000: eeprom@8000 { reg = <0x8000 0x200>; }; macaddr_factory_e000: macaddr@e000 { reg = <0xe000 0x6>; }; macaddr_factory_e006: macaddr@e006 { reg = <0xe006 0x6>; }; }; partition@140000 { label = "firmware"; reg = <0x140000 0x7e40000>; compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "kernel"; reg = <0x0 0x400000>; }; partition@400000 { label = "ubi"; reg = <0x400000 0x7a40000>; }; }; }; }; &pcie { status = "okay"; }; &pcie0 { wifi@0,0 { compatible = "mediatek,mt76"; reg = <0x0000 0 0 0 0>; nvmem-cells = <&eeprom_factory_8000>; nvmem-cell-names = "eeprom"; ieee80211-freq-limit = <5000000 6000000>; led { led-sources = <2>; led-active-low; }; }; }; &pcie1 { wifi@0,0 { compatible = "mediatek,mt76"; reg = <0x0000 0 0 0 0>; nvmem-cells = <&eeprom_factory_0>; nvmem-cell-names = "eeprom"; ieee80211-freq-limit = <2400000 2500000>; led { led-sources = <2>; led-active-low; }; }; }; &gmac0 { nvmem-cells = <&macaddr_factory_e000>; nvmem-cell-names = "mac-address"; }; &gmac1 { status = "okay"; label = "wan"; phy-handle = <ðphy4>; nvmem-cells = <&macaddr_factory_e006>; nvmem-cell-names = "mac-address"; }; &mdio { ethphy4: ethernet-phy@4 { reg = <4>; }; }; &switch0 { ports { port@0 { status = "okay"; label = "lan4"; }; port@1 { status = "okay"; label = "lan3"; }; port@2 { status = "okay"; label = "lan2"; }; port@3 { status = "okay"; label = "lan1"; }; }; }; &state_default { gpio { groups = "uart3", "uart2"; function = "gpio"; }; };