#include "mt7621.dtsi" #include #include / { compatible = "dlink,dir-860l-b1", "mediatek,mt7621-soc"; model = "D-Link DIR-860L B1"; aliases { label-mac-device = &gmac0; led-boot = &led_power_green; led-failsafe = &led_power_green; led-running = &led_power_green; led-upgrade = &led_power_green; }; leds { compatible = "gpio-leds"; power { label = "orange:power"; gpios = <&gpio 13 GPIO_ACTIVE_LOW>; }; led_power_green: power2 { label = "green:power"; gpios = <&gpio 15 GPIO_ACTIVE_LOW>; }; net { label = "orange:net"; gpios = <&gpio 14 GPIO_ACTIVE_LOW>; }; net2 { label = "green:net"; gpios = <&gpio 16 GPIO_ACTIVE_LOW>; }; }; keys { compatible = "gpio-keys"; reset { label = "reset"; gpios = <&gpio 7 GPIO_ACTIVE_LOW>; linux,code = ; }; wps { label = "wps"; gpios = <&gpio 18 GPIO_ACTIVE_LOW>; linux,code = ; }; }; }; &spi0 { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <10000000>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x0 0x30000>; read-only; }; partition@30000 { label = "u-boot-env"; reg = <0x30000 0x4000>; read-only; }; radio: partition@34000 { compatible = "nvmem-cells"; label = "radio"; reg = <0x34000 0x4000>; #address-cells = <1>; #size-cells = <1>; read-only; macaddr_radio_4: macaddr@4 { reg = <0x4 0x6>; }; eeprom_radio_0: eeprom@0 { reg = <0x0 0x200>; }; eeprom_radio_2000: eeprom@2000 { reg = <0x2000 0x200>; }; }; factory: partition@38000 { label = "factory"; reg = <0x38000 0x8000>; read-only; }; partition@40000 { label = "defaults"; reg = <0x40000 0x10000>; read-only; }; partition@50000 { compatible = "seama"; label = "firmware"; reg = <0x50000 0xfb0000>; }; }; }; }; &gmac0 { nvmem-cells = <&macaddr_radio_4>; nvmem-cell-names = "mac-address"; }; &gmac1 { status = "okay"; label = "wan"; phy-handle = <ðphy0>; nvmem-cells = <&macaddr_radio_4>; nvmem-cell-names = "mac-address"; }; &mdio { ethphy0: ethernet-phy@0 { reg = <0>; }; }; &switch0 { ports { port@1 { status = "okay"; label = "lan4"; }; port@2 { status = "okay"; label = "lan3"; }; port@3 { status = "okay"; label = "lan2"; }; port@4 { status = "okay"; label = "lan1"; }; }; }; &pcie { status = "okay"; reset-gpios = <&gpio 19 GPIO_ACTIVE_LOW>, <&gpio 8 GPIO_ACTIVE_LOW>; }; &pcie0 { wifi0: mt76@0,0 { reg = <0x0000 0 0 0 0>; nvmem-cells = <&eeprom_radio_2000>; nvmem-cell-names = "eeprom"; ieee80211-freq-limit = <5000000 6000000>; }; }; &pcie1 { wifi1: mt76@0,0 { reg = <0x0000 0 0 0 0>; nvmem-cells = <&eeprom_radio_0>; nvmem-cell-names = "eeprom"; ieee80211-freq-limit = <2400000 2500000>; }; }; &state_default { gpio { groups = "uart3", "jtag", "wdt"; function = "gpio"; }; };