From ed23e07bf7a1896b6eaa85b773bb43b1fad66d4b Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Sat, 21 Dec 2024 00:07:11 +0100 Subject: [PATCH] ARM: dts: ixp4xx: Fix up PCI on WG302 Looking at the board file for WG302 v2 was not a good idea because the GPIO IRQ for slot 2 differs, and v1 uses GPIO 10 instead of GPIO 9. Fix it up. Signed-off-by: Linus Walleij --- .../dts/intel/ixp/intel-ixp42x-netgear-wg302v1.dts | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) --- a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-netgear-wg302v1.dts +++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-netgear-wg302v1.dts @@ -57,7 +57,7 @@ status = "okay"; /* - * Taken from WG302 v2 PCI boardfile (wg302v2-pci.c) + * Taken from WG302 v1 PCI boardfile (wg302v1-pci.c) * We have slots (IDSEL) 1 and 2 with one assigned IRQ * each handling all IRQs. */ @@ -70,10 +70,10 @@ <0x0800 0 0 3 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 8 */ <0x0800 0 0 4 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 8 */ /* IDSEL 2 */ - <0x1000 0 0 1 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 9 */ - <0x1000 0 0 2 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 9 */ - <0x1000 0 0 3 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 9 */ - <0x1000 0 0 4 &gpio0 9 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 2 is irq 9 */ + <0x1000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 10 */ + <0x1000 0 0 2 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 10 */ + <0x1000 0 0 3 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 10 */ + <0x1000 0 0 4 &gpio0 10 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 2 is irq 10 */ }; ethernet@c8009000 {