#!/bin/sh # xor multiple hex values of the same length xor() { local val local ret="0x$1" local retlen=${#1} shift while [ -n "$1" ]; do val="0x$1" ret=$((ret ^ val)) shift done printf "%0${retlen}x" "$ret" } ath10kcal_die() { echo "ath10cal: " "$*" exit 1 } ath10kcal_extract() { local part=$1 local offset=$2 local count=$3 local mtd mtd=$(find_mtd_chardev $part) [ -n "$mtd" ] || \ ath10kcal_die "no mtd device found for partition $part" dd if=$mtd of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \ ath10kcal_die "failed to extract calibration data from $mtd" } ath10kcal_ubi_extract() { local part=$1 local offset=$2 local count=$3 local ubidev local ubi . /lib/upgrade/nand.sh ubidev=$(nand_find_ubi $CI_UBIPART) ubi=$(nand_find_volume $ubidev $part) [ -n "$ubi" ] || \ ath10kcal_die "no UBI volume found for $part" dd if=/dev/$ubi of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \ ath10kcal_die "failed to extract from $ubi" } ath10kcal_patch_mac_crc() { local mac=$1 local mac_offset=6 local chksum_offset=2 local xor_mac local xor_fw_mac local xor_fw_chksum [ -z "$mac" ] && return xor_fw_mac=$(hexdump -v -n 6 -s $mac_offset -e '/1 "%02x"' /lib/firmware/$FIRMWARE) xor_fw_mac="${xor_fw_mac:0:4} ${xor_fw_mac:4:4} ${xor_fw_mac:8:4}" macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=6 count=6 xor_mac=${mac//:/} xor_mac="${xor_mac:0:4} ${xor_mac:4:4} ${xor_mac:8:4}" xor_fw_chksum=$(hexdump -v -n 2 -s $chksum_offset -e '/1 "%02x"' /lib/firmware/$FIRMWARE) xor_fw_chksum=$(xor $xor_fw_chksum $xor_fw_mac $xor_mac) printf "%b" "\x${xor_fw_chksum:0:2}\x${xor_fw_chksum:2:2}" | \ dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=$chksum_offset count=2 } ath10kcal_is_caldata_valid() { local expected="$1" magic=$(hexdump -v -n 2 -e '1/1 "%02x"' /lib/firmware/$FIRMWARE) [[ "$magic" == "$expected" ]] return $? } [ -e /lib/firmware/$FIRMWARE ] && exit 0 . /lib/functions.sh . /lib/functions/system.sh board=$(board_name) case "$FIRMWARE" in "ath10k/cal-pci-0000:01:00.0.bin") case "$board" in meraki,mr33) ath10kcal_ubi_extract "ART" 36864 2116 ath10kcal_is_caldata_valid "4408" || ath10kcal_extract "ART" 36864 2116 ath10kcal_patch_mac_crc $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 102) +1) ;; esac ;; "ath10k/pre-cal-pci-0000:01:00.0.bin") case "$board" in asus,map-ac2200) ath10kcal_ubi_extract "Factory" 36864 12064 ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ /lib/firmware/ath10k/QCA9888/hw2.0/board.bin ;; openmesh,a62) ath10kcal_extract "0:ART" 36864 12064 ;; esac ;; "ath10k/pre-cal-ahb-a000000.wifi.bin") case "$board" in 8dev,jalapeno |\ alfa-network,ap120c-ac |\ glinet,gl-b1300 |\ linksys,ea6350v3 |\ qcom,ap-dk01.1-c1) ath10kcal_extract "ART" 4096 12064 ;; asus,map-ac2200) ath10kcal_ubi_extract "Factory" 4096 12064 ;; asus,rt-ac58u) CI_UBIPART=UBI_DEV ath10kcal_ubi_extract "Factory" 4096 12064 ;; avm,fritzbox-4040) /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config") ;; meraki,mr33) ath10kcal_ubi_extract "ART" 4096 12064 ath10kcal_is_caldata_valid "202f" || ath10kcal_extract "ART" 4096 12064 ath10kcal_patch_mac_crc $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 102) +2) ;; netgear,ex6100v2 |\ netgear,ex6150v2) ath10kcal_extract "ART" 4096 12064 ath10kcal_patch_mac_crc $(mtd_get_mac_binary dnidata 0) ;; compex,wpj428 |\ engenius,eap1300 |\ openmesh,a42 |\ openmesh,a62) ath10kcal_extract "0:ART" 4096 12064 ;; zyxel,nbg6617 |\ zyxel,wre6606) ath10kcal_extract "ART" 4096 12064 ath10kcal_patch_mac_crc $(macaddr_add $(cat /sys/class/net/eth0/address) -2) ;; esac ;; "ath10k/pre-cal-ahb-a800000.wifi.bin") case "$board" in 8dev,jalapeno |\ alfa-network,ap120c-ac |\ glinet,gl-b1300 |\ linksys,ea6350v3 |\ qcom,ap-dk01.1-c1) ath10kcal_extract "ART" 20480 12064 ;; asus,map-ac2200) ath10kcal_ubi_extract "Factory" 20480 12064 ;; asus,rt-ac58u) CI_UBIPART=UBI_DEV ath10kcal_ubi_extract "Factory" 20480 12064 ;; avm,fritzbox-4040) /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config") ;; meraki,mr33) ath10kcal_ubi_extract "ART" 20480 12064 ath10kcal_is_caldata_valid "202f" || ath10kcal_extract "ART" 20480 12064 ath10kcal_patch_mac_crc $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 102) +3) ;; netgear,ex6100v2 |\ netgear,ex6150v2) ath10kcal_extract "ART" 20480 12064 ath10kcal_patch_mac_crc $(mtd_get_mac_binary dnidata 12) ;; compex,wpj428 |\ engenius,eap1300 |\ openmesh,a42 |\ openmesh,a62) ath10kcal_extract "0:ART" 20480 12064 ;; zyxel,nbg6617 |\ zyxel,wre6606) ath10kcal_extract "ART" 20480 12064 ath10kcal_patch_mac_crc $(macaddr_add $(cat /sys/class/net/eth0/address) -1) ;; esac ;; *) exit 1 ;; esac