From e4d708702e6c98f2111e33201a264d6788564cb2 Mon Sep 17 00:00:00 2001 From: OpenWrt community Date: Fri, 12 May 2023 11:08:43 +0200 Subject: [PATCH] ssb_sprom: add generic kernel support for Broadcom Fallback SPROMs --- drivers/bcma/Kconfig | 4 ++++ drivers/bcma/Makefile | 1 + drivers/bcma/bcma_private.h | 4 ++++ drivers/bcma/main.c | 8 ++++++++ drivers/bcma/sprom.c | 23 ++++++++++++++--------- drivers/ssb/Kconfig | 5 +++++ drivers/ssb/Makefile | 1 + drivers/ssb/main.c | 8 ++++++++ drivers/ssb/sprom.c | 12 +++++++++++- drivers/ssb/ssb_private.h | 4 ++++ 10 files changed, 60 insertions(+), 10 deletions(-) --- a/drivers/bcma/Kconfig +++ b/drivers/bcma/Kconfig @@ -18,6 +18,10 @@ config BCMA_BLOCKIO bool default y +config BCMA_FALLBACK_SPROM + bool + default y + config BCMA_HOST_PCI_POSSIBLE bool depends on PCI = y --- a/drivers/bcma/Makefile +++ b/drivers/bcma/Makefile @@ -11,6 +11,7 @@ bcma-$(CONFIG_BCMA_DRIVER_PCI_HOSTMODE) bcma-$(CONFIG_BCMA_DRIVER_MIPS) += driver_mips.o bcma-$(CONFIG_BCMA_DRIVER_GMAC_CMN) += driver_gmac_cmn.o bcma-$(CONFIG_BCMA_DRIVER_GPIO) += driver_gpio.o +bcma-$(CONFIG_BCMA_FALLBACK_SPROM) += fallback-sprom.o bcma-$(CONFIG_BCMA_HOST_PCI) += host_pci.o bcma-$(CONFIG_BCMA_HOST_SOC) += host_soc.o obj-$(CONFIG_BCMA) += bcma.o --- a/drivers/bcma/bcma_private.h +++ b/drivers/bcma/bcma_private.h @@ -38,6 +38,10 @@ int bcma_bus_resume(struct bcma_bus *bus void bcma_detect_chip(struct bcma_bus *bus); int bcma_bus_scan(struct bcma_bus *bus); +/* fallback-sprom.c */ +int __init bcma_fbs_register(void); +int bcma_get_fallback_sprom(struct bcma_bus *dev, struct ssb_sprom *out); + /* sprom.c */ int bcma_sprom_get(struct bcma_bus *bus); --- a/drivers/bcma/main.c +++ b/drivers/bcma/main.c @@ -671,6 +671,14 @@ static int __init bcma_modinit(void) { int err; +#ifdef CONFIG_BCMA_FALLBACK_SPROM + err = bcma_fbs_register(); + if (err) { + pr_err("Fallback SPROM initialization failed\n"); + err = 0; + } +#endif /* CONFIG_BCMA_FALLBACK_SPROM */ + err = bcma_init_bus_register(); if (err) return err; --- a/drivers/bcma/sprom.c +++ b/drivers/bcma/sprom.c @@ -51,21 +51,26 @@ static int bcma_fill_sprom_with_fallback { int err; - if (!get_fallback_sprom) { + if (get_fallback_sprom) + err = get_fallback_sprom(bus, out); + +#ifdef CONFIG_BCMA_FALLBACK_SPROM + if (!get_fallback_sprom || err) + err = bcma_get_fallback_sprom(bus, out); +#else + if (!get_fallback_sprom) err = -ENOENT; - goto fail; - } +#endif /* CONFIG_BCMA_FALLBACK_SPROM */ - err = get_fallback_sprom(bus, out); - if (err) - goto fail; + if (err) { + bcma_warn(bus, "Using fallback SPROM failed (err %d)\n", err); + return err; + } bcma_debug(bus, "Using SPROM revision %d provided by platform.\n", bus->sprom.revision); + return 0; -fail: - bcma_warn(bus, "Using fallback SPROM failed (err %d)\n", err); - return err; } /************************************************** --- a/drivers/ssb/Kconfig +++ b/drivers/ssb/Kconfig @@ -25,6 +25,11 @@ if SSB config SSB_SPROM bool +config SSB_FALLBACK_SPROM + bool + depends on SSB_PCIHOST + default y + # Support for Block-I/O. SELECT this from the driver that needs it. config SSB_BLOCKIO bool --- a/drivers/ssb/Makefile +++ b/drivers/ssb/Makefile @@ -2,6 +2,7 @@ # core ssb-y += main.o scan.o ssb-$(CONFIG_SSB_EMBEDDED) += embedded.o +ssb-$(CONFIG_SSB_FALLBACK_SPROM) += fallback-sprom.o ssb-$(CONFIG_SSB_SPROM) += sprom.o # host support --- a/drivers/ssb/main.c +++ b/drivers/ssb/main.c @@ -1289,6 +1289,14 @@ static int __init ssb_modinit(void) { int err; +#ifdef CONFIG_SSB_FALLBACK_SPROM + err = ssb_fbs_register(); + if (err) { + pr_err("Fallback SPROM initialization failed\n"); + err = 0; + } +#endif /* CONFIG_SSB_FALLBACK_SPROM */ + /* See the comment at the ssb_is_early_boot definition */ ssb_is_early_boot = 0; err = bus_register(&ssb_bustype); --- a/drivers/ssb/sprom.c +++ b/drivers/ssb/sprom.c @@ -180,10 +180,20 @@ int ssb_arch_register_fallback_sprom(int int ssb_fill_sprom_with_fallback(struct ssb_bus *bus, struct ssb_sprom *out) { + int err; + + if (get_fallback_sprom) + err = get_fallback_sprom(bus, out); + +#ifdef CONFIG_SSB_FALLBACK_SPROM + if (!get_fallback_sprom || err) + err = ssb_get_fallback_sprom(bus, out); +#else if (!get_fallback_sprom) return -ENOENT; +#endif /* CONFIG_SSB_FALLBACK_SPROM */ - return get_fallback_sprom(bus, out); + return err; } /* https://bcm-v4.sipsolutions.net/802.11/IsSpromAvailable */ --- a/drivers/ssb/ssb_private.h +++ b/drivers/ssb/ssb_private.h @@ -143,6 +143,10 @@ extern int ssb_bus_scan(struct ssb_bus * extern void ssb_iounmap(struct ssb_bus *ssb); +/* fallback-sprom.c */ +int __init ssb_fbs_register(void); +int ssb_get_fallback_sprom(struct ssb_bus *dev, struct ssb_sprom *out); + /* sprom.c */ extern ssize_t ssb_attr_sprom_show(struct ssb_bus *bus, char *buf,