#include "mt7621.dtsi" #include #include / { aliases { label-mac-device = &gmac0; }; }; &nand { status = "okay"; mediatek,nmbm; mediatek,bmt-max-ratio = <15>; mediatek,bmt-max-reserved-blocks = <64>; mediatek,bmt-remap-range = <0x0 0x980000>, <0x2980000 0x7800000>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x0 0x80000>; read-only; }; partition@80000 { label = "u-boot-env"; reg = <0x80000 0x80000>; read-only; }; partition@100000 { label = "factory"; reg = <0x100000 0x80000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; eeprom_factory_0: eeprom@0 { reg = <0x0 0xe00>; }; precal_factory_e10: precal@e10 { reg = <0xe10 0x19c10>; }; }; }; partition@180000 { label = "firmware"; reg = <0x180000 0x2800000>; /* This concatenates kernel1 & kernel2 & rootfs */ compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "kernel"; reg = <0x0 0x800000>; }; partition@400000 { label = "ubi"; reg = <0x800000 0x2000000>; }; }; partition@2980000 { label = "zy_firmware_1"; reg = <0x2980000 0x2800000>; read-only; }; partition@5180000 { label = "zy_rootfs_data"; reg = <0x5180000 0x1400000>; read-only; }; partition@6580000 { label = "zy_logs"; reg = <0x6580000 0xd00000>; read-only; }; partition@7280000 { label = "myzyxel"; reg = <0x7280000 0x480000>; read-only; }; partition@7700000 { label = "bootconfig"; reg = <0x7700000 0x80000>; }; partition@7780000 { label = "mrd"; reg = <0x7780000 0x80000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; macaddr_mrd_1fff8: macaddr@1fff8 { reg = <0x1fff8 0x6>; }; }; }; }; }; &pcie { status = "okay"; }; &pcie1 { wlan_5g: wifi@0,0 { reg = <0x0 0 0 0 0>; compatible = "mediatek,mt76"; nvmem-cells = <&eeprom_factory_0>, <&precal_factory_e10>; nvmem-cell-names = "eeprom", "precal"; /* MAC-Address set in userspace */ }; }; &gmac0 { nvmem-cells = <&macaddr_mrd_1fff8>; nvmem-cell-names = "mac-address"; }; &switch0 { ports { port@4 { status = "okay"; label = "lan"; }; }; }; &state_default { gpio { groups = "uart3"; function = "gpio"; }; };