From 44ad8207806973f4e4f7d870fff36cc01f494250 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Thu, 13 Jul 2023 13:11:45 +0200 Subject: [PATCH] ARM: dts: BCM53573: Fix Ethernet info for Luxul devices MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Both Luxul's XAP devices (XAP-810 and XAP-1440) are access points that use a non-default design. They don't include switch but have a single Ethernet port and BCM54210E PHY connected to the Ethernet controller's MDIO bus. Support for those devices regressed due to two changes: 1. Describing MDIO bus with switch After commit 9fb90ae6cae7 ("ARM: dts: BCM53573: Describe on-SoC BCM53125 rev 4 switch") Linux stopped probing for MDIO devices. 2. Dropping hardcoded BCM54210E delays In commit fea7fda7f50a ("net: phy: broadcom: Fix RGMII delays configuration for BCM54210E") support for other PHY modes was added but that requires a proper "phy-mode" value in DT. Both above changes are correct (they don't need to be reverted or anything) but they need this fix for DT data to be correct and for Linux to work properly. Fixes: 9fb90ae6cae7 ("ARM: dts: BCM53573: Describe on-SoC BCM53125 rev 4 switch") Signed-off-by: Rafał Miłecki Link: https://lore.kernel.org/r/20230713111145.14864-1-zajec5@gmail.com Signed-off-by: Florian Fainelli --- .../boot/dts/broadcom/bcm47189-luxul-xap-1440.dts | 13 +++++++++++++ .../boot/dts/broadcom/bcm47189-luxul-xap-810.dts | 13 +++++++++++++ 2 files changed, 26 insertions(+) --- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts +++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts @@ -58,3 +58,16 @@ }; }; }; + +&gmac0 { + phy-mode = "rgmii"; + phy-handle = <&bcm54210e>; + + mdio { + /delete-node/ switch@1e; + + bcm54210e: ethernet-phy@0 { + reg = <0>; + }; + }; +}; --- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts +++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts @@ -94,3 +94,16 @@ }; }; }; + +&gmac0 { + phy-mode = "rgmii"; + phy-handle = <&bcm54210e>; + + mdio { + /delete-node/ switch@1e; + + bcm54210e: ethernet-phy@0 { + reg = <0>; + }; + }; +};