// SPDX-License-Identifier: GPL-2.0-or-later OR MIT

#include "rtl839x.dtsi"

#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>

/ {
	compatible = "tplink,sg2452p-v4", "realtek,rtl8393-soc";
	model = "TP-Link SG2452P v4";

	memory@0 {
		device_type = "memory";
		reg = <0x0 0x10000000>;
	};

	aliases {
		led-boot = &led_sys;
		led-failsafe = &led_sys;
		led-running = &led_sys;
		led-upgrade = &led_sys;
		label-mac-device = &ethernet0;
	};

	chosen {
		stdout-path = "serial0:38400n8";
	};

	keys {
		compatible = "gpio-keys";

		reset {
			label = "reset";
			gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RESTART>;
		};

		speed {
			label = "speed";
			gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
			linux,code = <BTN_0>;
		};
	};

	gpio_fan_sys {
		compatible = "gpio-fan";
		alarm-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
	};

	gpio_fan_psu_1 {
		pinctrl-names = "default";
		pinctrl-0 = <&disable_jtag>;
		compatible = "gpio-fan";

		alarm-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
		gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
		/* the actual speeds (rpm) are unknown, just use dummy values */
		gpio-fan,speed-map = <1 0>, <2 1>;
		#cooling-cells = <2>;
	};

	gpio_fan_psu_2 {
		/* This fan runs in parallel to PSU1 fan, but has a separate
		 * alarm GPIO. This is not (yet) supported by the gpio-fan driver,
		 * so a separate instance is added
		 */
		compatible = "gpio-fan";
		alarm-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	};

	leds {
		pinctrl-names = "default";
		compatible = "gpio-leds";

		led-0 {
			label = "green:speed";
			gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
			color = <LED_COLOR_ID_GREEN>;
			function = LED_FUNCTION_INDICATOR;
		};

		led-1 {
			label = "green:poe";
			gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
			color = <LED_COLOR_ID_GREEN>;
			function = LED_FUNCTION_INDICATOR;
		};

		led_sys: led-2 {
			label = "green:sys";
			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
			color = <LED_COLOR_ID_GREEN>;
			function = LED_FUNCTION_STATUS;
		};

		led-3 {
			label = "green:fan";
			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
			color = <LED_COLOR_ID_GREEN>;
			function = LED_FUNCTION_STATUS;
		};

		led-4 {
			label = "amber:fan";
			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
			color = <LED_COLOR_ID_AMBER>;
			function = "fault-fan";
		};

		led-5 {
			label = "green:poe-max";
			gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
			color = <LED_COLOR_ID_GREEN>;
			function = "alarm-poe";
		};
	};

	i2c-gpio-0 {
		compatible = "i2c-gpio";
		sda-gpios = <&gpio0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
		scl-gpios = <&gpio0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
		i2c-gpio,delay-us = <2>;
		#address-cells = <1>;
		#size-cells = <0>;

		/* LAN9 - LAN12 */
		tps23861@5 {
			compatible = "ti,tps23861";
			reg = <0x05>;
		};

		/* LAN17 - LAN20 */
		tps23861@6 {
			compatible = "ti,tps23861";
			reg = <0x06>;
		};

		/* LAN45 - LAN48 */
		tps23861@9 {
			compatible = "ti,tps23861";
			reg = <0x09>;
		};

		/* LAN37 - LAN40 */
		tps23861@a {
			compatible = "ti,tps23861";
			reg = <0x0a>;
		};

		/* LAN1 - LAN4 */
		tps23861@14 {
			compatible = "ti,tps23861";
			reg = <0x14>;
		};

		/* LAN25 - LAN28 */
		tps23861@24 {
			compatible = "ti,tps23861";
			reg = <0x24>;
		};

		/* LAN33 - LAN 36 */
		tps23861@25 {
			compatible = "ti,tps23861";
			reg = <0x25>;
		};

		/* LAN41 - LAN44 */
		tps23861@26 {
			compatible = "ti,tps23861";
			reg = <0x26>;
		};

		/* LAN13 - LAN16 */
		tps23861@29 {
			compatible = "ti,tps23861";
			reg = <0x29>;
		};

		/* LAN29 - LAN32 */
		tps23861@2c {
			compatible = "ti,tps23861";
			reg = <0x2c>;
		};

		/* LAN5 - LAN8 */
		tps23861@48 {
			compatible = "ti,tps23861";
			reg = <0x48>;
		};

		/* LAN21 - LAN24 */
		tps23861@49 {
			compatible = "ti,tps23861";
			reg = <0x49>;
		};
	};

	gpio-restart {
		compatible = "gpio-restart";
		gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
	};
};

&gpio0 {
	poe-enable {
		gpio-hog;
		gpios = <23 GPIO_ACTIVE_HIGH>;
		output-high;
		line-name = "poe-enable";
	};
};

&spi0 {
	status = "okay";
	flash@0 {
		compatible = "jedec,spi-nor";
		reg = <0>;
		spi-max-frequency = <10000000>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "u-boot";
				reg = <0x0 0xe0000>;
				read-only;
			};
			partition@e0000 {
				label = "u-boot-env";
				reg = <0xe0000 0x20000>;
			};

			/* We use the "sys", "usrimg1" and "usrimg2" partitions
			 *  as firmware since the kernel needs to be in "sys", but the
			 *  partition is too small to hold the "rootfs" as well.
			 *  The original partition map contains:
			 *
			 *   partition@100000 {
			 *       label = "sys";
			 *       reg = <0x100000 0x600000>;
			 *   };
			 *   partition@700000 {
			 *       label = "usrimg1";
			 *       reg = <0x700000 0xa00000>;
			 *   };
			 *   partition@1100000 {
			 *       label = "usrimg2";
			 *       reg = <0x1100000 0xa00000>;
			 *   };
			 */

			partition@100000 {
				label = "firmware";
				reg = <0x100000 0x1a00000>;
			};
			partition@1b00000 {
				label = "usrappfs";
				reg = <0x1b00000 0x400000>;
			};
			partition@1f00000 {
				label = "para";
				reg = <0x1f00000 0x100000>;
				read-only;

				nvmem-layout {
					compatible = "fixed-layout";
					#address-cells = <1>;
					#size-cells = <1>;

					factory_macaddr: macaddr@fdff4 {
						reg = <0xfdff4 0x6>;
					};
				};
			};
		};
	};
};

&ethernet0 {
	nvmem-cells = <&factory_macaddr>;
	nvmem-cell-names = "mac-address";

	mdio: mdio-bus {
		compatible = "realtek,rtl838x-mdio";
		#address-cells = <1>;
		#size-cells = <0>;

		/* External phy RTL8218B #1 */
		EXTERNAL_PHY(0)
		EXTERNAL_PHY(1)
		EXTERNAL_PHY(2)
		EXTERNAL_PHY(3)
		EXTERNAL_PHY(4)
		EXTERNAL_PHY(5)
		EXTERNAL_PHY(6)
		EXTERNAL_PHY(7)

		/* External phy RTL8218B #2 */
		EXTERNAL_PHY(8)
		EXTERNAL_PHY(9)
		EXTERNAL_PHY(10)
		EXTERNAL_PHY(11)
		EXTERNAL_PHY(12)
		EXTERNAL_PHY(13)
		EXTERNAL_PHY(14)
		EXTERNAL_PHY(15)

		/* External phy RTL8218B #3 */
		EXTERNAL_PHY(16)
		EXTERNAL_PHY(17)
		EXTERNAL_PHY(18)
		EXTERNAL_PHY(19)
		EXTERNAL_PHY(20)
		EXTERNAL_PHY(21)
		EXTERNAL_PHY(22)
		EXTERNAL_PHY(23)

		/* External phy RTL8218B #4 */
		EXTERNAL_PHY(24)
		EXTERNAL_PHY(25)
		EXTERNAL_PHY(26)
		EXTERNAL_PHY(27)
		EXTERNAL_PHY(28)
		EXTERNAL_PHY(29)
		EXTERNAL_PHY(30)
		EXTERNAL_PHY(31)

		/* External phy RTL8218B #5 */
		EXTERNAL_PHY(32)
		EXTERNAL_PHY(33)
		EXTERNAL_PHY(34)
		EXTERNAL_PHY(35)
		EXTERNAL_PHY(36)
		EXTERNAL_PHY(37)
		EXTERNAL_PHY(38)
		EXTERNAL_PHY(39)

		/* External phy RTL8218B #6 */
		EXTERNAL_PHY(40)
		EXTERNAL_PHY(41)
		EXTERNAL_PHY(42)
		EXTERNAL_PHY(43)
		EXTERNAL_PHY(44)
		EXTERNAL_PHY(45)
		EXTERNAL_PHY(46)
		EXTERNAL_PHY(47)
	};
};

&switch0 {
	ports {
		#address-cells = <1>;
		#size-cells = <0>;

		SWITCH_PORT(0, 01, qsgmii)
		SWITCH_PORT(1, 02, qsgmii)
		SWITCH_PORT(2, 03, qsgmii)
		SWITCH_PORT(3, 04, qsgmii)
		SWITCH_PORT(4, 05, qsgmii)
		SWITCH_PORT(5, 06, qsgmii)
		SWITCH_PORT(6, 07, qsgmii)
		SWITCH_PORT(7, 08, qsgmii)

		SWITCH_PORT(8, 09, qsgmii)
		SWITCH_PORT(9, 10, qsgmii)
		SWITCH_PORT(10, 11, qsgmii)
		SWITCH_PORT(11, 12, qsgmii)
		SWITCH_PORT(12, 13, qsgmii)
		SWITCH_PORT(13, 14, qsgmii)
		SWITCH_PORT(14, 15, qsgmii)
		SWITCH_PORT(15, 16, qsgmii)

		SWITCH_PORT(16, 17, qsgmii)
		SWITCH_PORT(17, 18, qsgmii)
		SWITCH_PORT(18, 19, qsgmii)
		SWITCH_PORT(19, 20, qsgmii)
		SWITCH_PORT(20, 21, qsgmii)
		SWITCH_PORT(21, 22, qsgmii)
		SWITCH_PORT(22, 23, qsgmii)
		SWITCH_PORT(23, 24, qsgmii)

		SWITCH_PORT(24, 25, qsgmii)
		SWITCH_PORT(25, 26, qsgmii)
		SWITCH_PORT(26, 27, qsgmii)
		SWITCH_PORT(27, 28, qsgmii)
		SWITCH_PORT(28, 29, qsgmii)
		SWITCH_PORT(29, 30, qsgmii)
		SWITCH_PORT(30, 31, qsgmii)
		SWITCH_PORT(31, 32, qsgmii)

		SWITCH_PORT(32, 33, qsgmii)
		SWITCH_PORT(33, 34, qsgmii)
		SWITCH_PORT(34, 35, qsgmii)
		SWITCH_PORT(35, 36, qsgmii)
		SWITCH_PORT(36, 37, qsgmii)
		SWITCH_PORT(37, 38, qsgmii)
		SWITCH_PORT(38, 39, qsgmii)
		SWITCH_PORT(39, 40, qsgmii)

		SWITCH_PORT(40, 41, qsgmii)
		SWITCH_PORT(41, 42, qsgmii)
		SWITCH_PORT(42, 43, qsgmii)
		SWITCH_PORT(43, 44, qsgmii)
		SWITCH_PORT(44, 45, qsgmii)
		SWITCH_PORT(45, 46, qsgmii)
		SWITCH_PORT(46, 47, qsgmii)
		SWITCH_PORT(47, 48, qsgmii)

		/* CPU-Port */
		port@52 {
			ethernet = <&ethernet0>;
			reg = <52>;
			phy-mode = "internal";

			fixed-link {
				speed = <1000>;
				full-duplex;
			};
		};
	};
};