From a4165830ca237f2b3318faf62562bce8ce12a389 Mon Sep 17 00:00:00 2001 From: Christian Marangi Date: Thu, 29 Dec 2022 17:33:36 +0100 Subject: [PATCH 5/5] net: dsa: qca8k: improve mdio master read/write by using single lo/hi Improve mdio master read/write by using singe mii read/write lo/hi. In a read and write we need to poll the mdio master regs in a busy loop to check for a specific bit present in the upper half of the reg. We can ignore the other half since it won't contain useful data. This will save an additional useless read for each read and write operation. In a read operation the returned data is present in the mdio master reg lower half. We can ignore the other half since it won't contain useful data. This will save an additional useless read for each read operation. In a read operation it's needed to just set the hi half of the mdio master reg as the lo half will be replaced by the result. This will save an additional useless write for each read operation. Tested-by: Ronald Wahl Signed-off-by: Christian Marangi Signed-off-by: David S. Miller --- drivers/net/dsa/qca/qca8k-8xxx.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) --- a/drivers/net/dsa/qca/qca8k-8xxx.c +++ b/drivers/net/dsa/qca/qca8k-8xxx.c @@ -754,9 +754,9 @@ qca8k_mdio_busy_wait(struct mii_bus *bus qca8k_split_addr(reg, &r1, &r2, &page); - ret = read_poll_timeout(qca8k_mii_read32, ret1, !(val & mask), 0, + ret = read_poll_timeout(qca8k_mii_read_hi, ret1, !(val & mask), 0, QCA8K_BUSY_WAIT_TIMEOUT * USEC_PER_MSEC, false, - bus, 0x10 | r2, r1, &val); + bus, 0x10 | r2, r1 + 1, &val); /* Check if qca8k_read has failed for a different reason * before returnting -ETIMEDOUT @@ -798,7 +798,7 @@ qca8k_mdio_write(struct qca8k_priv *priv exit: /* even if the busy_wait timeouts try to clear the MASTER_EN */ - qca8k_mii_write32(bus, 0x10 | r2, r1, 0); + qca8k_mii_write_hi(bus, 0x10 | r2, r1 + 1, 0); mutex_unlock(&bus->mdio_lock); @@ -828,18 +828,18 @@ qca8k_mdio_read(struct qca8k_priv *priv, if (ret) goto exit; - qca8k_mii_write32(bus, 0x10 | r2, r1, val); + qca8k_mii_write_hi(bus, 0x10 | r2, r1 + 1, val); ret = qca8k_mdio_busy_wait(bus, QCA8K_MDIO_MASTER_CTRL, QCA8K_MDIO_MASTER_BUSY); if (ret) goto exit; - ret = qca8k_mii_read32(bus, 0x10 | r2, r1, &val); + ret = qca8k_mii_read_lo(bus, 0x10 | r2, r1, &val); exit: /* even if the busy_wait timeouts try to clear the MASTER_EN */ - qca8k_mii_write32(bus, 0x10 | r2, r1, 0); + qca8k_mii_write_hi(bus, 0x10 | r2, r1 + 1, 0); mutex_unlock(&bus->mdio_lock);