// SPDX-License-Identifier: GPL-2.0-or-later OR MIT // Copyright (c) 2021 Cezary Jackiewicz // Copyright (c) 2021, 2022 Lech Perczak #include "qca9563_zte_mf286.dtsi" / { ubi-concat { compatible = "mtd-concat"; devices = <&ubiconcat0 &ubiconcat1>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { reg = <0x0 0x7a60000>; label = "ubi"; }; }; }; }; &led_debug { /* Hidden blue SMD LED below signal strength LEDs * Visible through slits underside of the case, * and slightly through the case below signal state LEDs */ color = ; label = "blue:debug"; }; &boot_flash { partitions { partition@0 { label = "u-boot"; reg = <0x000000 0x0a0000>; read-only; }; partition@a0000 { label = "u-boot-env"; reg = <0x0a0000 0x020000>; read-only; }; partition@c0000 { label = "reserved1"; reg = <0x0c0000 0x140000>; read-only; }; }; }; &system_flash { partitions { partition@0 { label = "fota-flag"; reg = <0x00000 0xa0000>; read-only; }; partition@a0000 { label = "art"; reg = <0xa0000 0x80000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; cal_art_1000: cal@1000 { reg = <0x1000 0x440>; }; precal_art_5000: precal@5000 { reg = <0x5000 0x2f20>; }; }; }; partition@120000 { label = "mac"; reg = <0x120000 0x80000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; macaddr_mac_0: mac-address@0 { compatible = "mac-base"; reg = <0x0 0x6>; #nvmem-cell-cells = <1>; }; }; }; /* This encompasses stock reserved2, cfg-param, log, oops, * reserved3, web partitions, * which can be overwritten safely */ ubiconcat0: partition@1a0000 { label = "ubiconcat0"; reg = <0x1a0000 0x1660000>; }; /* Kernel MTD size is increased to 4MB from stock 3MB */ partition@1800000 { label = "kernel"; reg = <0x1800000 0x400000>; }; /* This encompasses stock rootfs, data, fota partitions, * which can be overwritten safely */ ubiconcat1: partition@1c00000 { label = "ubiconcat1"; reg = <0x1c00000 0x6400000>; }; }; }; ð0 { nvmem-cells = <&macaddr_mac_0 0>; nvmem-cell-names = "mac-address"; }; &wifi_ath10k { nvmem-cells = <&macaddr_mac_0 0x20000>, <&precal_art_5000>; nvmem-cell-names = "mac-address", "pre-calibration"; }; &wmac { nvmem-cells = <&macaddr_mac_0 0>, <&cal_art_1000>; nvmem-cell-names = "mac-address", "calibration"; };