// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include "qca956x.dtsi" #include #include / { compatible = "tplink,tl-wdr6500-v2", "qca,qca9561"; model = "TP-Link TL-WDR6500 v2"; aliases { led-boot = &led_system; led-failsafe = &led_system; led-running = &led_system; led-upgrade = &led_system; label-mac-device = ð1; }; keys { compatible = "gpio-keys"; reset { label = "Reset button"; linux,code = ; gpios = <&gpio 1 GPIO_ACTIVE_LOW>; }; }; leds { compatible = "gpio-leds"; lan4 { label = "green:lan4"; gpios = <&gpio 14 GPIO_ACTIVE_LOW>; }; lan3 { label = "green:lan3"; gpios = <&gpio 15 GPIO_ACTIVE_LOW>; }; lan2 { label = "green:lan2"; gpios = <&gpio 16 GPIO_ACTIVE_LOW>; }; lan1 { label = "green:lan1"; gpios = <&gpio 17 GPIO_ACTIVE_LOW>; }; wan { label = "green:wan"; gpios = <&gpio 18 GPIO_ACTIVE_LOW>; }; led_system: system { label = "white:system"; gpios = <&gpio 21 GPIO_ACTIVE_HIGH>; default-state = "on"; }; }; }; &spi { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <25000000>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x000000 0x010000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; macaddr_uboot_0fc00: macaddr@0fc00 { compatible = "mac-base"; reg = <0x0fc00 0x6>; #nvmem-cell-cells = <1>; }; }; }; partition@10000 { compatible = "tplink,firmware"; label = "firmware"; reg = <0x010000 0x7e0000>; }; partition@7f0000 { label = "art"; reg = <0x7f0000 0x010000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; calibration_ath9k: calibration@1000 { reg = <0x1000 0x440>; }; calibration_ath10k: calibration@5000 { reg = <0x5000 0x844>; }; }; }; }; }; }; &uart { status = "okay"; }; &pcie { status = "okay"; wifi@0,0 { compatible = "qcom,ath10k"; reg = <0 0 0 0 0>; nvmem-cells = <&macaddr_uboot_0fc00 (-2)>, <&calibration_ath10k>; nvmem-cell-names = "mac-address", "calibration"; }; }; &mdio0 { status = "okay"; }; ð0 { status = "okay"; phy-handle = <&swphy4>; nvmem-cells = <&macaddr_uboot_0fc00 1>; nvmem-cell-names = "mac-address"; }; ð1 { status = "okay"; nvmem-cells = <&macaddr_uboot_0fc00 0>; nvmem-cell-names = "mac-address"; }; &wmac { status = "okay"; nvmem-cells = <&macaddr_uboot_0fc00 (-1)>, <&calibration_ath9k>; nvmem-cell-names = "mac-address", "calibration"; }; &usb0 { status = "okay"; }; &usb_phy0 { status = "okay"; };