From 63a0a4d85bc900464c5b046b13808a582345f8c8 Mon Sep 17 00:00:00 2001 From: Birger Koblitz Date: Sat, 11 Dec 2021 20:14:47 +0100 Subject: [PATCH] realtek: Add support for RTL9300/RTL9310 I2C controller This adds support for the RTL9300 and RTL9310 I2C controller. The controller implements the SMBus protocol for SMBus transfers over an I2C bus. The driver supports selecting one of the 2 possible SCL pins and any of the 8 possible SDA pins. Bus speeds of 100kHz (standard speed) and 400kHz (high speed I2C) are supported. Submitted-by: Birger Koblitz --- drivers/i2c/busses/Kconfig | 10 +++++++++ drivers/i2c/busses/Makefile | 1 + 2 files changed, 11 insertions(+) --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -1021,6 +1021,16 @@ config I2C_RK3X This driver can also be built as a module. If so, the module will be called i2c-rk3x. +config I2C_RTL9300 + tristate "Realtek RTL9300 I2C adapter" + depends on OF + help + Say Y here to include support for the I2C adapter in Realtek RTL9300 + and RTL9310 SoCs. + + This driver can also be built as a module. If so, the module will + be called i2c-rtl9300. + config I2C_RZV2M tristate "Renesas RZ/V2M adapter" depends on ARCH_RENESAS || COMPILE_TEST --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -101,6 +101,7 @@ obj-$(CONFIG_I2C_QCOM_GENI) += i2c-qcom- obj-$(CONFIG_I2C_QUP) += i2c-qup.o obj-$(CONFIG_I2C_RIIC) += i2c-riic.o obj-$(CONFIG_I2C_RK3X) += i2c-rk3x.o +obj-$(CONFIG_I2C_RTL9300) += i2c-rtl9300.o obj-$(CONFIG_I2C_RZV2M) += i2c-rzv2m.o obj-$(CONFIG_I2C_S3C2410) += i2c-s3c2410.o obj-$(CONFIG_I2C_SH7760) += i2c-sh7760.o