# Copyright (C) 2006-2012 OpenWrt.org # Copyright (C) 2010 Vertical Communications # # This is free software, licensed under the GNU General Public License v2. # See /LICENSE for more information. # config TARGET_DEFAULT_LAN_IP_FROM_PREINIT bool "Use preinit IP configuration as default LAN IP" if IMAGEOPT default n help Enabling this will set the default LAN IP address and netmask to the preinit values set in the image config. menuconfig PREINITOPT bool "Preinit configuration options" if IMAGEOPT default n help These options are used to control the environment used to initialize the system before running init (which typically mean /sbin/init which switches to multiuser mode). config TARGET_PREINIT_SUPPRESS_STDERR bool "Suppress stderr messages during preinit" if PREINITOPT default y help Sends stderr to null during preinit. This is the default behaviour in previous versions of OpenWrt. This also prevents init process itself from displaying stderr, however processes launched by init in multiuser through inittab will use the current terminal (e.g. the ash shell launched by inittab will display stderr). That's the same behaviour as seen in previous version of OpenWrt. config TARGET_PREINIT_DISABLE_FAILSAFE bool prompt "Disable failsafe" if PREINITOPT default n help Disable failsafe mode. While it is very handy while experimenting or developing it really ought to be disabled in production environments as it is a major security loophole. config TARGET_PREINIT_TIMEOUT int prompt "Failsafe/Debug wait timeout" if PREINITOPT default 2 help How long to wait for failsafe mode to be entered or for a debug option to be pressed before continuing with a regular boot. config TARGET_PREINIT_SHOW_NETMSG bool prompt "Show all preinit network messages" if PREINITOPT default n help Show preinit all network messages (via netmsg broadcast), not only the message indicating to press reset to enter failsafe. Note that if the architecture doesn't define an interface, and there is no 'Preinit network interface' defined, then no messages will be emitted, even if this is set. config TARGET_PREINIT_SUPPRESS_FAILSAFE_NETMSG bool prompt "Suppress network message indicating failsafe" if ( PREINITOPT && !TARGET_PREINIT_SHOW_NETMSG && !TARGET_PREINIT_DISABLE_FAILSAFE ) default n help If "Show all preinit network messages" above is not set, then setting this option suppresses the only message that would be emitted otherwise, name the network message to enter failsafe (via netmsg). config TARGET_PREINIT_IFNAME string prompt "Preinit network interface" if PREINITOPT default "" help Interface for sending preinit messages to network, and any other default networking in failsafe or preinit. If empty uses $ifname (if defined in /etc/preinit.arch). config TARGET_PREINIT_IP string prompt "IP address for preinit network messages" if PREINITOPT default "192.168.1.1" help IP address used to configure interface for preinit network messages, including failsafe messages config TARGET_PREINIT_NETMASK string prompt "Netmask for preinit network messages" if PREINITOPT default "255.255.255.0" help Netmask used to configure interface for preinit network messages, including failsafes messages config TARGET_PREINIT_BROADCAST string prompt "Broadcast address for preinit network messages" if PREINITOPT default "192.168.1.255" help Broadcast address to which to send preinit network messages, as as failsafe messages menuconfig INITOPT bool "Init configuration options" if IMAGEOPT default n help These option choose the command that will run as the 'init' command (that is which is responsible for controlling the system once preinit transfers control to it) as well as some options controlling its behaviour. Normally init is /sbin/init. config TARGET_INIT_PATH string prompt "PATH for regular boot" if INITOPT default "/usr/sbin:/usr/bin:/sbin:/bin" help Default PATH used during normal operation config TARGET_INIT_ENV string prompt "Environment variables to set when starting init (start with none)" if INITOPT default "" help Should be a space separated list of variable assignments. These variables will be present in the environment. Spaces may not be present (including through expansion) even in a quoted string (env doesn't understanding quoting). config TARGET_INIT_CMD string prompt "Init command" if INITOPT default "/sbin/init" help The executable to run as the init process. Is 'exec'd by preinit (which is the init that the kernel launches on boot). config TARGET_INIT_SUPPRESS_STDERR bool prompt "Suppress stderr messages of init" if INITOPT default y help Prevents showing stderr messages for init command if not already suppressed during preinit. This is the default behaviour in previous versions of OpenWrt. Removing this does nothing if stderr is suppressed during preinit (which is the default). menuconfig VERSIONOPT bool "Version configuration options" if IMAGEOPT default n help These options allow to override the version information embedded in the /etc/openwrt_version, /etc/openwrt_release, /etc/banner, /etc/opkg.conf, and /etc/os-release files. Usually there is no need to set these, but they're useful for release builds or custom OpenWrt redistributions that should carry custom version tags. if VERSIONOPT config VERSION_DIST string prompt "Release distribution" default "OpenWrt" help This is the name of the release distribution. If unspecified, it defaults to OpenWrt. config VERSION_NUMBER string prompt "Release version number" help This is the release version number embedded in the image. If unspecified, it defaults to SNAPSHOT for the master branch or to ##.##-SNAPSHOT on release branches. config VERSION_CODE string prompt "Release version code" help This is the release version code embedded in the image. If unspecified, it defaults to a revision number describing the repository version of the source, e.g. the number of commits since a branch point or a short Git commit ID. config VERSION_REPO string prompt "Release repository" default "https://downloads.openwrt.org/releases/23.05.0-rc4" help This is the repository address embedded in the image, it defaults to the trunk snapshot repo; the url may contain the following placeholders: %R .. Repository revision ID %V .. Configured release version number or "SNAPSHOT", uppercase %v .. Configured release version number or "snapshot", lowercase %C .. Configured release revision code or value of %R, uppercase %c .. Configured release revision code or value of %R, lowercase %D .. Distribution name or "OpenWrt", uppercase %d .. Distribution name or "openwrt", lowercase %T .. Target name %S .. Target/Subtarget name %A .. Package architecture %t .. Build taint flags, e.g. "no-all busybox" %M .. Manufacturer name or "OpenWrt" %P .. Product name or "Generic" %h .. Hardware revision or "v0" config VERSION_HOME_URL string prompt "Release Homepage" help This is the release version homepage config VERSION_MANUFACTURER string prompt "Manufacturer name" help This is the manufacturer name embedded in /etc/device_info Useful for OEMs building OpenWrt based firmware config VERSION_MANUFACTURER_URL string prompt "Manufacturer URL" help This is an URL to the manufacturer's website embedded in /etc/device_info Useful for OEMs building OpenWrt based firmware config VERSION_BUG_URL string prompt "Bug reporting URL" help This is an URL to provide users for providing bug reports config VERSION_SUPPORT_URL string prompt "Support URL" help This an URL to provide users seeking support config VERSION_PRODUCT string prompt "Product name" help This is the product name embedded in /etc/device_info Useful for OEMs building OpenWrt based firmware config VERSION_HWREV string prompt "Hardware revision" help This is the hardware revision string embedded in /etc/device_info Useful for OEMs building OpenWrt based firmware config VERSION_FILENAMES bool prompt "Version number in filenames" default y help Enable this to include the version number in firmware image, SDK- and Image Builder archive file names config VERSION_CODE_FILENAMES bool prompt "Revision code in filenames" default n help Enable this to include the revision identifier or the configured version code into the firmware image, SDK- and Image Builder archive file names endif menuconfig PER_FEED_REPO bool "Separate feed repositories" if IMAGEOPT default y help If set, a separate repository is generated within bin/*/packages/ for the core packages and each enabled feed. source "tmp/.config-feeds.in"