#include "mt7628an.dtsi" #include #include #include / { compatible = "d-team,pbr-d1", "mediatek,mt7628an-soc"; model = "PBR-D1"; aliases { led-boot = &led_power; led-failsafe = &led_power; led-running = &led_power; led-upgrade = &led_power; }; chosen { bootargs = "console=ttyS0,115200"; }; aliases { serial0 = &uart2; }; leds { compatible = "gpio-leds"; usb { function = LED_FUNCTION_USB; color = ; gpios = <&gpio 0 GPIO_ACTIVE_LOW>; trigger-sources = <&ohci_port1>, <&ehci_port1>; linux,default-trigger = "usbport"; }; led_power: power { function = LED_FUNCTION_POWER; color = ; gpios = <&gpio 14 GPIO_ACTIVE_LOW>; default-state = "on"; }; }; keys { compatible = "gpio-keys"; reset { label = "reset"; gpios = <&gpio 70 GPIO_ACTIVE_LOW>; linux,code = ; }; }; wgpio: gpio-wifi { compatible = "mediatek,gpio-wifi"; #address-cells = <1>; #size-cells = <0>; gpio-controller; #gpio-cells = <2>; }; }; &state_default { gpio { groups = "gpio"; function = "gpio"; }; i2c { groups = "i2c"; function = "gpio"; }; i2s { groups = "i2s"; function = "gpio"; }; spis { groups = "spis"; function = "gpio"; }; wdt { groups = "wdt"; function = "gpio"; }; }; &spi0 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&spi_pins>, <&spi_cs1_pins>; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <40000000>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x0 0x30000>; read-only; }; partition@30000 { label = "u-boot-env"; reg = <0x30000 0x10000>; }; partition@40000 { label = "factory"; reg = <0x40000 0x10000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; macaddr_factory_28: macaddr@28 { reg = <0x28 0x6>; }; }; }; partition@50000 { compatible = "denx,uimage"; label = "firmware"; reg = <0x50000 0x0fb0000>; }; }; }; spidev@1 { #address-cells = <1>; #size-cells = <1>; compatible = "linux,spidev"; reg = <1>; spi-max-frequency = <40000000>; }; }; &i2c { status = "okay"; }; &uart1 { status = "okay"; }; &uart2 { status = "okay"; }; &pwm { status = "okay"; }; ðernet { nvmem-cells = <&macaddr_factory_28>; nvmem-cell-names = "mac-address"; }; &sdhci { status = "okay"; mediatek,cd-high; };