/dts-v1/;

#include "mt7620n.dtsi"

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

/ {
	compatible = "ravpower,rp-wd03", "ralink,mt7620n-soc";
	model = "RAVPower RP-WD03";

	aliases {
		label-mac-device = &ethernet;
		led-boot = &led_wifi_blue;
		led-failsafe = &led_wifi_blue;
		led-running = &led_wifi_blue;
		led-upgrade = &led_wifi_blue;
	};

	chosen {
		bootargs = "console=ttyS0,115200";
	};

	leds {
		compatible = "gpio-leds";

		wifi_green {
			label = "rp-wd03:green:wifi";
			gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
		};

		led_wifi_blue: wifi_blue {
			label = "rp-wd03:blue:wifi";
			gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
		};
	};

	keys {
		compatible = "gpio-keys";

		reset {
			label = "reset";
			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RESTART>;
		};
	};

	virtual_flash {
		compatible = "mtd-concat";

		devices = <&firmware1 &firmware2 &firmware3>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				compatible = "openwrt,okli";
				label = "firmware";
				reg = <0x0 0x0>;
			};
		};
	};
};

&gpio2 {
	status = "okay";
};

&gpio3 {
	status = "okay";
};

&i2c {
	status = "okay";
};

&spi0 {
	status = "okay";

	flash@0 {
		compatible = "jedec,spi-nor";
		reg = <0>;
		spi-max-frequency = <50000000>;
		m25p,fast-read;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "u-boot";
				reg = <0x0 0x30000>;
				read-only;
			};

			partition@30000 {
				label = "config";
				reg = <0x30000 0x10000>;
				read-only;
			};

			factory: partition@40000 {
				label = "factory";
				reg = <0x40000 0x10000>;
				read-only;
			};

			partition@50000 {
				label = "loader";
				reg = <0x50000 0x10000>;
				read-only;
			};

			firmware2: partition@60000 {
				label = "firmware2";
				reg = <0x60000 0x170000>;
			};

			partition@1d0000 {
				label = "u-boot-env";
				reg = <0x1d0000 0x10000>;
			};

			firmware3: partition@1e0000 {
				label = "firmware3";
				reg = <0x1e0000 0x20000>;
			};

			firmware1: partition@200000 {
				label = "firmware1";
				reg = <0x200000 0x600000>;
			};
		};
	};
};

&ehci {
	status = "okay";
};

&ohci {
	status = "okay";
};

&ethernet {
	mtd-mac-address = <&factory 0x28>;
};

&wmac {
	ralink,mtd-eeprom = <&factory 0x0>;
};

&state_default {
	gpio {
		groups = "wled", "ephy";
		function = "gpio";
	};
};