From 3d4f30269402f795f6a4054ced3bfdcbdaddc357 Mon Sep 17 00:00:00 2001 From: Phil Elwell Date: Thu, 11 May 2023 16:08:15 +0100 Subject: [PATCH 1127/1135] drm/vc4: Use phys addresses for slave DMA config Slave addresses for DMA are meant to be supplied as physical addresses (contrary to what struct snd_dmaengine_dai_dma_data does). Signed-off-by: Phil Elwell --- drivers/gpu/drm/vc4/vc4_hdmi.c | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) --- a/drivers/gpu/drm/vc4/vc4_hdmi.c +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c @@ -2831,7 +2831,7 @@ static int vc4_hdmi_audio_init(struct vc struct snd_soc_card *card = &vc4_hdmi->audio.card; struct device *dev = &vc4_hdmi->pdev->dev; struct platform_device *codec_pdev; - const __be32 *addr; + struct resource *iomem; int index, len; int ret; @@ -2867,22 +2867,18 @@ static int vc4_hdmi_audio_init(struct vc } /* - * Get the physical address of VC4_HD_MAI_DATA. We need to retrieve - * the bus address specified in the DT, because the physical address - * (the one returned by platform_get_resource()) is not appropriate - * for DMA transfers. - * This VC/MMU should probably be exposed to avoid this kind of hacks. + * Get the physical address of VC4_HD_MAI_DATA. */ index = of_property_match_string(dev->of_node, "reg-names", "hd"); /* Before BCM2711, we don't have a named register range */ if (index < 0) index = 1; - addr = of_get_address(dev->of_node, index, NULL, NULL); - if (!addr) + iomem = platform_get_resource(vc4_hdmi->pdev, IORESOURCE_MEM, index); + if (!iomem) return -EINVAL; - vc4_hdmi->audio.dma_data.addr = be32_to_cpup(addr) + mai_data->offset; + vc4_hdmi->audio.dma_data.addr = iomem->start + mai_data->offset; vc4_hdmi->audio.dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; vc4_hdmi->audio.dma_data.maxburst = 2;