// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /dts-v1/; #include "mt7628an.dtsi" #include #include #include / { compatible = "comfast,cf-wr617ac", "mediatek,mt7628an-soc"; model = "Comfast CF-WR617AC"; keys { compatible = "gpio-keys"; reset { label = "reset"; gpios = <&gpio 38 GPIO_ACTIVE_LOW>; linux,code = ; }; }; leds { compatible = "gpio-leds"; led_status_blue: status_blue { function = LED_FUNCTION_STATUS; color = ; gpios = <&gpio 44 GPIO_ACTIVE_LOW>; }; led_status_red: status_red { function = LED_FUNCTION_STATUS; color = ; gpios = <&gpio 37 GPIO_ACTIVE_LOW>; }; }; aliases { led-boot = &led_status_red; led-failsafe = &led_status_red; led-running = &led_status_blue; led-upgrade = &led_status_red; }; chosen { bootargs = "console=ttyS0,115200"; }; }; &spi0 { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <40000000>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x0 0x30000>; read-only; }; partition@30000 { label = "u-boot-env"; reg = <0x30000 0x10000>; read-only; }; factory: partition@40000 { label = "factory"; reg = <0x40000 0x10000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; eeprom_factory_0: eeprom@0 { reg = <0x0 0x400>; }; eeprom_factory_8000: eeprom@8000 { reg = <0x8000 0x200>; }; macaddr_factory_8004: macaddr@8004 { compatible = "mac-base"; reg = <0x8004 0x6>; #nvmem-cell-cells = <1>; }; macaddr_factory_e000: macaddr@e000 { reg = <0xe000 0x6>; }; }; }; partition@50000 { compatible = "denx,uimage"; label = "firmware"; reg = <0x50000 0x760000>; }; }; }; }; &pcie { status = "okay"; }; &pcie0 { wifi@0,0 { compatible = "mediatek,mt76"; reg = <0x0000 0 0 0 0>; ieee80211-freq-limit = <5000000 6000000>; nvmem-cells = <&eeprom_factory_8000>, <&macaddr_factory_8004 2>; nvmem-cell-names = "eeprom", "mac-address"; }; }; ðernet { nvmem-cells = <&macaddr_factory_e000>; nvmem-cell-names = "mac-address"; }; &esw { mediatek,portmap = <0x2f>; }; &wmac { status = "okay"; nvmem-cells = <&eeprom_factory_0>; nvmem-cell-names = "eeprom"; };