// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include "mt7621.dtsi" #include #include / { compatible = "keenetic,kn-3010", "mediatek,mt7621-soc"; model = "Keenetic KN-3010"; aliases { led-boot = &led_power; led-failsafe = &led_power; led-running = &led_power; led-upgrade = &led_power; label-mac-device = &gmac0; }; chosen { bootargs = "console=ttyS0,115200"; }; leds { compatible = "gpio-leds"; led_power: power { label = "green:power"; gpios = <&gpio 45 GPIO_ACTIVE_HIGH>; }; internet { label = "green:internet"; gpios = <&gpio 46 GPIO_ACTIVE_LOW>; }; wifi2 { label = "green:wifi2"; gpios = <&gpio 47 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy0tpt"; }; wifi5 { label = "green:wifi5"; gpios = <&gpio 48 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy1tpt"; }; }; keys { compatible = "gpio-keys"; fn { label = "fn"; gpios = <&gpio 7 GPIO_ACTIVE_LOW>; linux,code = ; }; reset { label = "reset"; gpios = <&gpio 8 GPIO_ACTIVE_LOW>; linux,code = ; }; wps { label = "wps"; gpios = <&gpio 41 GPIO_ACTIVE_LOW>; linux,code = ; }; }; virtual_flash { compatible = "mtd-concat"; devices = <&firmware1 &firmware2>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { compatible = "denx,uimage"; label = "firmware"; reg = <0x0 0x1ec0000>; }; }; }; }; &state_default { gpio { groups = "uart3", "sdhci"; function = "gpio"; }; }; &xhci { status = "disabled"; }; &spi0 { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <31000000>; partitions: partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x0 0x30000>; read-only; }; partition@30000 { label = "u-config"; reg = <0x30000 0x10000>; read-only; }; factory: partition@40000 { compatible = "nvmem-cells"; label = "rf-eeprom"; reg = <0x40000 0x10000>; #address-cells = <1>; #size-cells = <1>; read-only; eeprom_factory_0: eeprom@0 { reg = <0x0 0x400>; }; eeprom_factory_400: eeprom@400 { reg = <0x400 0x4da8>; }; macaddr_factory_4: macaddr@4 { reg = <0x4 0x6>; }; macaddr_factory_28: macaddr@28 { reg = <0x28 0x6>; }; }; firmware1: partition@50000 { label = "firmware_1"; reg = <0x50000 0xf60000>; }; partition@fb0000 { label = "config_1"; reg = <0xfb0000 0x40000>; read-only; }; partition@ff0000 { label = "dump"; reg = <0xff0000 0x10000>; read-only; }; partition@1000000 { label = "u-state"; reg = <0x1000000 0x30000>; read-only; }; partition@1030000 { label = "u-config_res"; reg = <0x1030000 0x10000>; read-only; }; partition@1040000 { label = "rf-eeprom_res"; reg = <0x1040000 0x10000>; read-only; }; firmware2: partition@1050000 { label = "firmware_2"; reg = <0x1050000 0xf60000>; }; partition@1fb0000 { label = "config_2"; reg = <0x1fb0000 0x40000>; read-only; }; }; }; }; &mdio { ethphy0: ethernet-phy@0 { reg = <0>; }; }; &gmac0 { nvmem-cells = <&macaddr_factory_4>; nvmem-cell-names = "mac-address"; }; &gmac1 { status = "okay"; label = "wan"; phy-handle = <ðphy0>; nvmem-cells = <&macaddr_factory_28>; nvmem-cell-names = "mac-address"; }; &switch0 { ports { port@1 { status = "okay"; label = "lan1"; }; port@2 { status = "okay"; label = "lan2"; }; port@3 { status = "okay"; label = "lan3"; }; port@4 { status = "okay"; label = "lan4"; }; }; }; &pcie { status = "okay"; }; &pcie0 { wifi@0,0 { compatible = "mediatek,mt76"; reg = <0x0000 0 0 0 0>; nvmem-cells = <&eeprom_factory_0>; nvmem-cell-names = "eeprom"; ieee80211-freq-limit = <2400000 2500000>; }; }; &pcie1 { wifi@0,0 { compatible = "mediatek,mt76"; reg = <0x0000 0 0 0 0>; nvmem-cells = <&eeprom_factory_400>; nvmem-cell-names = "eeprom"; ieee80211-freq-limit = <5000000 6000000>; }; };