// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include "mt7621.dtsi" #include #include #include / { compatible = "linksys,e5600", "mediatek,mt7621-soc"; model = "Linksys E5600"; aliases { led-boot = &led_power; led-failsafe = &led_power; led-running = &led_power; led-upgrade = &led_power; }; chosen { bootargs = "console=ttyS0,115200"; }; keys { compatible = "gpio-keys"; reset { label = "reset"; gpios = <&gpio 12 GPIO_ACTIVE_LOW>; linux,code = ; }; wps { label = "wps"; gpios = <&gpio 17 GPIO_ACTIVE_LOW>; linux,code = ; }; }; leds { compatible = "gpio-leds"; wps { function = LED_FUNCTION_WPS; color = ; gpios = <&gpio 5 GPIO_ACTIVE_HIGH>; }; led_power: power { function = LED_FUNCTION_POWER; color = ; gpios = <&gpio 10 GPIO_ACTIVE_HIGH>; default-state = "on"; }; wan_amber { function = LED_FUNCTION_WAN; color = ; gpios = <&gpio 13 GPIO_ACTIVE_HIGH>; }; wan_blue { function = LED_FUNCTION_WAN; color = ; gpios = <&gpio 15 GPIO_ACTIVE_HIGH>; }; }; }; &nand { status = "okay"; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "boot"; reg = <0x0 0x80000>; read-only; }; partition@80000 { label = "u_env"; reg = <0x80000 0x40000>; read-only; }; partition@c0000 { label = "factory"; reg = <0xc0000 0x40000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; eeprom_factory_0: eeprom@0 { reg = <0x0 0x400>; }; eeprom_factory_8000: eeprom@8000 { reg = <0x8000 0x4da8>; }; }; }; partition@100000 { label = "s_env"; reg = <0x100000 0x40000>; }; partition@140000 { label = "devinfo"; reg = <0x140000 0x40000>; read-only; }; partition@180000 { label = "kernel"; reg = <0x180000 0x400000>; }; partition@580000 { label = "ubi"; reg = <0x580000 0x1a00000>; }; partition@1f80000 { label = "alt_firmware"; reg = <0x1f80000 0x1e00000>; }; partition@3d80000 { label = "gdata"; reg = <0x3d80000 0x4200000>; }; }; }; &state_default { gpio { groups = "uart2", "uart3", "jtag"; function = "gpio"; }; }; &pcie { status = "okay"; }; &pcie0 { mt76@0,0 { compatible = "mediatek,mt76"; reg = <0x0000 0 0 0 0>; nvmem-cells = <&eeprom_factory_0>; nvmem-cell-names = "eeprom"; }; }; &pcie1 { mt76@0,0 { compatible = "mediatek,mt76"; reg = <0x0000 0 0 0 0>; nvmem-cells = <&eeprom_factory_8000>; nvmem-cell-names = "eeprom"; }; }; &gmac1 { status = "okay"; label = "wan"; phy-handle = <ðphy4>; }; &mdio { ethphy4: ethernet-phy@4 { reg = <4>; }; }; &switch0 { ports { port@0 { status = "okay"; label = "lan1"; }; port@1 { status = "okay"; label = "lan2"; }; port@2 { status = "okay"; label = "lan3"; }; port@3 { status = "okay"; label = "lan4"; }; }; }; &xhci { status = "disabled"; };