#include <dt-bindings/leds/common.h>

#include "mt7620a_tplink_8m.dtsi"

/ {
	compatible = "tplink,archer-c20-v1", "ralink,mt7620a-soc";
	model = "TP-Link Archer C20 v1";

	aliases {
		led-boot = &led_power;
		led-failsafe = &led_power;
		led-running = &led_power;
		led-upgrade = &led_power;
	};

	leds {
		compatible = "gpio-leds";

		led-0 {
			function = LED_FUNCTION_LAN;
			color = <LED_COLOR_ID_BLUE>;
			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
		};

		led_power: led-1 {
			function = LED_FUNCTION_POWER;
			color = <LED_COLOR_ID_BLUE>;
			gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
			default-state = "keep";
		};

		led-2 {
			function = LED_FUNCTION_USB;
			color = <LED_COLOR_ID_BLUE>;
			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
			trigger-sources = <&ohci_port1>, <&ehci_port1>;
			linux,default-trigger = "usbport";
		};

		led-3 {
			function = LED_FUNCTION_WAN;
			color = <LED_COLOR_ID_BLUE>;
			gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
		};

		led-4 {
			function = LED_FUNCTION_WAN;
			color = <LED_COLOR_ID_ORANGE>;
			gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
		};

		led-5 {
			function = LED_FUNCTION_WLAN_5GHZ;
			color = <LED_COLOR_ID_BLUE>;
			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
			linux,default-trigger = "phy0tpt";
		};

		led-6 {
			function = LED_FUNCTION_WLAN_2GHZ;
			color = <LED_COLOR_ID_BLUE>;
			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
			linux,default-trigger = "phy1tpt";
		};

		led-7 {
			function = LED_FUNCTION_WPS;
			color = <LED_COLOR_ID_BLUE>;
			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
		};
	};
};

&state_default {
	gpio {
		groups = "i2c", "uartf", "wled", "ephy", "spi refclk", "wdt";
		function = "gpio";
	};
};

&wmac {
	pinctrl-names = "default", "pa_gpio";
	pinctrl-0 = <&pa_pins>;
	pinctrl-1 = <&pa_gpio_pins>;

	nvmem-cells = <&eeprom_radio_0>, <&macaddr_rom_f100 (-2)>;
	nvmem-cell-names = "eeprom", "mac-address";
};

&wifi {
	nvmem-cells = <&eeprom_radio_8000>, <&macaddr_rom_f100 (-1)>;
	nvmem-cell-names = "eeprom", "mac-address";
};