// SPDX-License-Identifier: GPL-2.0-or-later OR MIT

#include "mt7621.dtsi"

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

/ {
	compatible = "telco-electronics,x1", "mediatek,mt7621-soc";
	model = "Telco Electronics X1";

	aliases {
		led-boot = &system_led;
		led-failsafe = &system_led;
		led-running = &system_led;
		led-upgrade = &system_led;
	};

	chosen {
		bootargs = "console=ttyS0,115200";
	};

	keys {
		compatible = "gpio-keys";

		reset {
			label = "reset";
			gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RESTART>;
		};
	};

	leds {
		compatible = "gpio-leds";

		system_led: system {
			label = "green:system";
			gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
		};

		modem_offline {
			label = "red:modem-offline";
			gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
		};

		modem_4g {
			label = "blue:modem-4g";
			gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
		};

		modem_3g {
			label = "green:modem-3g";
			gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
		};

		modem_rssi_lowest {
			label = "green:modem-rssi-lowest";
			gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
		};

		modem_rssi_low {
			label = "green:modem-rssi-low";
			gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
		};

		modem_rssi_medium {
			label = "green:modem-rssi-medium";
			gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
		};

		modem_rssi_high {
			label = "green:modem-rssi-high";
			gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
		};

		modem_rssi_highest {
			label = "green:modem-rssi-highest";
			gpios = <&gpio 31 GPIO_ACTIVE_LOW>;
		};
	};
};

&spi0 {
	status = "okay";

	flash@0 {
		compatible = "jedec,spi-nor";
		reg = <0>;
		spi-max-frequency = <14000000>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "bootloader";
				reg = <0x0 0x30000>;
				read-only;
			};

			partition@30000 {
				label = "config";
				reg = <0x30000 0x10000>;
				read-only;
			};

			factory: partition@40000 {
				label = "factory";
				reg = <0x40000 0x10000>;
				read-only;

				nvmem-layout {
					compatible = "fixed-layout";
					#address-cells = <1>;
					#size-cells = <1>;

					eeprom_factory_0: eeprom@0 {
						reg = <0x0 0x400>;
					};

					eeprom_factory_8000: eeprom@8000 {
						reg = <0x8000 0x200>;
					};

					macaddr_factory_e006: macaddr@e006 {
						compatible = "mac-base";
						reg = <0xe006 0x6>;
						#nvmem-cell-cells = <1>;
					};
				};
			};

			firmware: partition@50000 {
				compatible = "denx,uimage";
				label = "firmware";
				reg = <0x50000 0xfb0000>;
			};
		};
	};
};

&ethernet {
	pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>;
};

&gmac0 {
	nvmem-cells = <&macaddr_factory_e006 0>;
	nvmem-cell-names = "mac-address";
};

&switch0 {
	ports {
		port@0 {
			status = "okay";
			label = "lan1";
		};

		port@1 {
			status = "okay";
			label = "lan2";
		};

		port@2 {
			status = "okay";
			label = "lan3";
		};

		port@3 {
			status = "okay";
			label = "lan4";
		};

		port@4 {
			status = "okay";
			label = "wan";
			nvmem-cells = <&macaddr_factory_e006 1>;
			nvmem-cell-names = "mac-address";
		};
	};
};

&state_default {
	gpio {
		groups = "wdt", "rgmii2";
		function = "gpio";
	};
};

&pcie {
	status = "okay";
};

&pcie0 {
	wifi@0,0 {
		compatible = "pci14c3,7603";
		reg = <0x0000 0 0 0 0>;
		nvmem-cells = <&eeprom_factory_0>;
		nvmem-cell-names = "eeprom";
		ieee80211-freq-limit = <2400000 2500000>;
	};
};

&pcie1 {
	wifi@0,0 {
		compatible = "pci14c3,7662";
		reg = <0x0000 0 0 0 0>;
		nvmem-cells = <&eeprom_factory_8000>;
		nvmem-cell-names = "eeprom";
		ieee80211-freq-limit = <5000000 6000000>;

		led {
			led-sources = <2>;
		};
	};
};