// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include "qca955x_senao_loader.dtsi" #include #include / { compatible = "engenius,eap1200h", "qca,qca9557"; model = "EnGenius EAP1200H"; aliases { label-mac-device = ð0; led-boot = &led_power; led-failsafe = &led_power; led-running = &led_power; led-upgrade = &led_power; }; keys { compatible = "gpio-keys"; reset { label = "reset"; gpios = <&gpio 17 GPIO_ACTIVE_LOW>; debounce-interval = <60>; linux,code = ; }; }; leds { compatible = "gpio-leds"; led_power: power { label = "amber:power"; gpios = <&gpio 22 GPIO_ACTIVE_LOW>; default-state = "on"; }; wifi2g { label = "blue:wifi2g"; gpios = <&gpio 13 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy1tpt"; }; wifi5g { label = "green:wifi5g"; gpios = <&gpio 23 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy0tpt"; }; wps { label = "blue:wps"; gpios = <&gpio 19 GPIO_ACTIVE_LOW>; }; }; }; &partitions { partition@ff0000 { label = "art"; reg = <0xff0000 0x010000>; read-only; compatible = "nvmem-cells"; #address-cells = <1>; #size-cells = <1>; macaddr_art_0: macaddr@0 { reg = <0x0 0x6>; }; calibration_art_1000: calibration@1000 { reg = <0x1000 0x440>; }; calibration_art_5000: calibration@5000 { reg = <0x5000 0x844>; }; }; }; &mdio0 { status = "okay"; phy5: ethernet-phy@5 { reg = <5>; eee-broken-100tx; eee-broken-1000t; }; }; ð0 { status = "okay"; nvmem-cells = <&macaddr_art_0>; nvmem-cell-names = "mac-address"; phy-handle = <&phy5>; phy-mode = "rgmii-id"; pll-data = <0x82000000 0x80000101 0x80001313>; }; &wmac { status = "okay"; nvmem-cells = <&macaddr_art_0>, <&calibration_art_1000>; nvmem-cell-names = "mac-address", "calibration"; mac-address-increment = <1>; }; &ath10k { status = "okay"; nvmem-cells = <&macaddr_art_0>, <&calibration_art_5000>; nvmem-cell-names = "mac-address", "calibration"; mac-address-increment = <2>; };